Best Arbor For Hole Saw Center Pilot Drills

Starrett KA19-N\Oops\ Arbor, Hole Enlargement Arbor

  • Replaces the pilot drill in any Starrett A1, A2 or A10 type arbors.
  • Replacing the pilot drill, the KA19 allows diameters to be enlarged by attaching a saw of the same size to that of the existing hole.
  • This saw then acts as the pilot for the larger diameter saw that is attached to the arbor in the normal way.
Check Stock

SUNGATOR 6-Piece Bi-Metal Hole Saw Kit, General Purpose 3

  • DURABLE: Construction of high quality Bi-Metal for rust proof, 2mm thick, much more durable and can offer a up to 50% longer life.
  • GREAT HOLE CUTTING: Sharp teeth perfect for hole cutting on metal, wood, PVC board, plastic and drywall.
  • PROFESSIONAL AND SAFE: The hole saw arbor is designed with 2 locking pins which can firmly fix the hole saw, improving stability, safety and preventing over tightening.
  • EASY TO USE: Tool-free, fast and easy to operate. The pilot drill can be replaced by removing the set screws with the hex key.
  • 4 slots design for easy plug removal after using.
  • compatible with most drills of other manufacturers.
  • COMPLETE SET: Includes 3 hole saws: 3", 4", 4-1/4" for needs in different situations.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood(not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness :Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5,This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Koopi 6 inch Hole Saw for Making Cornhole Boards, BI-Metal Heavy Duty Steel Corn Hole Saw , Great 152mm Hole Drill Bit for Cutting Wood, Plastice, Sheet Metal (6in Dia)

  • This 6" Hole Saw drill bit is designed for cutting circle holes in corn hole boards, wood, plastic, thin metal.
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast..
  • This cornhole saw is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
  • Arbor shank diamater- 3/8 in,fit all 3/8" or 1/2" drills..
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

VIKITON Hole Saw Kit for Metal and Wood Plastic Project, Bi-Metal Hole Saw Set with Case from 7/8'' to 2-1/2'', Hole Cutter with Flat and Smooth Cutting Drilling Edge, Fast Chip Removal

  • Long Service Life : Hole Saw Kit, Bi-metal construction , special flexible steel saw body and high speed steel cutting teeth , for long service life , rust proof , great corrosion and heat resistance..
  • Superior Versatile Performance : High speed steel sharp cutting teeth effectively drills through metal , wood , PVC board , plastic and drywall , clean and smooth , high precision ..
  • Kit Includes: 7/8’’ , 1-1/8’’ , 1-3/8’’ , 1-3/4’’ , 2’’ , 2-1/2’’ hole saws , 1 pilot drill bits for replacement, 1 big arbor (1 drill bit), 1 small arbor (1 drill bit), 1 hex key..
  • High Efficiency : The deep gullets on the sides of hole saw provides fast chip removal , and the geometry funtional slot on the bottom of hole saw provides easy plug removal ..
  • Storage Conveniently : Kit box included for easy storage and carry , free of worry about losing small parts in the kit after handling, handy kit..
  • Suitable for: This kit is high performance cost ratio tool set, easy to operate, very suitable for DIYers to do some normal project around house and yard..
Check Stock

5-1/2 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Glass Granite Marble Tile Tiling 5 1/2 Inches in 5 1 2 inch

  • Diamond Coated Hole Saw Drilling Holesaw Tool 5 1/2" - Larger Than 5 Inches.
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL.
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation.
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required.
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbor.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • ...ip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier..
Check Stock