Categories

Best Arbor For Hole Saw Pilot Bits

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Hole Saw Quick Change Mandrel 7/16\ Shank New Hole Saw Arbor Fit 9/16\ to 10\ Hole Saw , Extra Pilot Drill Bit & Bi Metal Hole Saw, Big Value

  • This New kit includes: 1pcs 7/16” Hexagonal groove Large Quick Change Mandrel with 5/8” thread. It fits 1.21” to 10” hole saw, 1 Adapter with1/2” thread fits 0.55” to 1.2” hole saw..
  • Extra: 1set 1” ,1-1/4” Bi-metal hole saw(Max cutting depth 1.50”), 1x 4.35”, 2x3.5” silver HSS Drill bits with ¼” shank for arbor(only drilling for wood & soft metal),3x3.5” black HSS Drill bits with ¼” shank for arbor( for hard metal). 8×1” CrV Screwdriver BITS, 1 magnetic bit holder. It’s a Big Value..
  • The Large Arbor's plastic block is easy to grasp and force, and the material is light, strong, and clean. This plastic body is passed drop test and torque test..
  • This New quick change arbor kit is for quick connecter connection, convenient installation and unloading, large torque.
  • Time-saving to use is more than the traditional arbor 2 times..
  • This large arbor & adapter fits full size hole saw from 0.55” to 10” (14mm to 250mm) hole saw with 1/2.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

VIKITON Hole Saw Kit for Metal and Wood Plastic Project, Bi-Metal Hole Saw Set with Case from 7/8'' to 2-1/2'', Hole Cutter with Flat and Smooth Cutting Drilling Edge, Fast Chip Removal

  • Long Service Life : Hole Saw Kit, Bi-metal construction , special flexible steel saw body and high speed steel cutting teeth , for long service life , rust proof , great corrosion and heat resistance..
  • Superior Versatile Performance : High speed steel sharp cutting teeth effectively drills through metal , wood , PVC board , plastic and drywall , clean and smooth , high precision ..
  • Kit Includes: 7/8’’ , 1-1/8’’ , 1-3/8’’ , 1-3/4’’ , 2’’ , 2-1/2’’ hole saws , 1 pilot drill bits for replacement, 1 big arbor (1 drill bit), 1 small arbor (1 drill bit), 1 hex key..
  • High Efficiency : The deep gullets on the sides of hole saw provides fast chip removal , and the geometry funtional slot on the bottom of hole saw provides easy plug removal ..
  • Storage Conveniently : Kit box included for easy storage and carry , free of worry about losing small parts in the kit after handling, handy kit..
  • Suitable for: This kit is high performance cost ratio tool set, easy to operate, very suitable for DIYers to do some normal project around house and yard..
Check Stock

MKC 6 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2，Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

MKC 5 inch Hole Saw Cutter with Big Arbor & Extra Measure Tape for Wood, PVC, MDF, Drywall, Aluminum

  • 2，Ideal for Wood, Plasterboard, PVC, MDF, Drywall, Thin Aluminum & Copper (NOT for black Metal). For home projects on air ducts, speakers, ceiling lights, etc..
  • 4, The hole saw is made of BI-metal strip with high toughness and high hardness. With the clean edge design, cutting smooth and easy..
  • 5, TIPS: When you drilling: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
  • Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
  • Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
  • High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
  • Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

  • 【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
  • 【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
  • 【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
  • 【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
  • 【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..
Check Stock

Koopi 1-Inch / 25mm BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 1" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • This 1 in hole saw made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
  • Pakage Include: 1 x 1" hole saw (hole saw and arbor are integrated design).
Check Stock

Acekit 2 1/4 inch Hole Saw With 3/8 Arbor HSS Bi-Metal Hole Saw Blade And Variable Teeth Pitch For Wood,Plastic Board,Pipe,Plywood,And Soft Metal Sheet (57mm)

  • 【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,dual slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting.
  • 【DIMENSIONS】diameter of the hole saw about 57mm for 2 1/4 inch hole cutting, depth of the hole saw about 1 inch (25mm).
  • 【QUICK CHANGE ARBOR】size of the screw in arbor is 3/8 inch for quick change mandrel, fits both 3/8 and 1/2 inch drills.
  • 【BONUS】the hole saw came with a allen wrench for drill bits installation , so you need not to pay extra money for it, and 1 pack of extra drill bits for long term usage.
  • 【WIDE APPLICATION】With the hole saw, you can easily cut precise hole for wood/plywood/laminated/PVC board, plastic pipe, ceiling ,kitchen cabinet hole cutting, you can also use it to cut hole for soft metal sheet (kind remind: for metal sheet cutting constant cooling with water will be good for long-term usage and fast cutting).
Check Stock