Categories

Best Arbor For Stud Removal

LENOX Tools Hole Saw Arbor with 4-1/4-Inch Drill Bit (1779772)

  • LENOX hole saw arbor extension is fast and easy to engage and disengage.
  • No tools are needed, helping prevent the hole saw from locking on the arbor.
  • LENOX hole saw arbor threads directly into virtually all hole saws.
Check Stock

7 High Performance Diamond Grinding Wheels for Concrete Paint Epoxy Mastic Coating Removal 30/40 Grit 10 Arrow Segments 5/8 -11 Arbor

  • AGGRESSIVE GRINDING - high peformance grinding wheels designed for fast stock removal on concrete, curb gutters, expansion joints, high spots, epoxy, paint, mastics or coating removal.
  • HIGH QUALITY DIAMONDS - contains higher grade and higher concentration of diamond grit than standard grinding wheels.
  • GRIT SIZE/SEGMENTS - #30/40 grit with arrow segments.
  • GRINDING METHOD - use wet or dry with angle grinders.
Check Stock

7" High Performance Diamond Grinding Wheels for Aggressive Concrete, Paint, Epoxy, Mastic, Coating Removal, 18/20 Grit, S Segments, 5/8"-11 Arbor

  • AGGRESSIVE GRINDING - high peformance grinding wheels designed for fast stock removal on concrete, curb gutters, expansion joints, high spots, epoxy, paint, mastics or coating removal.
  • HIGH QUALITY DIAMONDS - contains higher grade and higher concentration of diamond grit than standard grinding wheels.
  • GRIT SIZE/SEGMENTS - #18/20 grit with S segments.
  • GRINDING METHOD - use wet or dry with angle grinders.
Check Stock

Lenox Tools 1779670 6L Snap Back Arbor with 3-1/4-Inch Pilot Drill Bit for Hole Saws

  • LENOX hole saw arbor extension is fast and easy to engage and disengage.
  • No tools are needed, helping prevent the hole saw from locking on the arbor.
  • LENOX hole saw arbor threads directly into virtually all hole saws.
  • this item fits hole saws from 1-1/4” – 6” in size.
Check Stock

LINE10 Tools 6-inch Wire Brush Wheel for Bench Grinder, Set of 2, Brass-Coated Steel for Cleaning Rust

  • Kit comes with two 6 inch diameter wire brush wheels which can be mounted on any 6 inch bench grinder with 5/8 or 1/2 inch arbor.
  • 1/2-inch bushing is included for 1/2-inch arbor grinders, 5/8-inch arbor fits on most 6 inch bench grinders.
  • Ideal for Rust removal, Paint Stripping, Deburring sharp edges, Edge Blending.
  • Quality Long lasting Brass-coated hardened steel bristle wire reduces sparking and wire breakage.
  • Ideal stationary solution for any shop, check the power tool safety instructions before use 3750 RPM Max.
Check Stock

BOSCH HCS008 8 pc. Edge Wood Hole Saw Set

  • Eight-piece set includes 1 In., 1-1/4 In., 1-1/2 In., 1-3/4 In., 2 In. 2-1/2 In. and 2-1/2 In. hole saws with arbor and pilot bit.
  • Bosch-exclusive Turbo-Teeth technology – for high-speed performance and long life.
  • Specially shaped, large chip-clearance slots – provide fast drilling, easy plug removal.
  • Integrated arbor and pilot bit – no additional purchases needed.
  • 1/4 In. hex shank – for use in quick-change chucks.
Check Stock

Lamsion Rust Remover Wheel Remove Paint and Oxidation Poly Strip Wheel Disc Abrasive Angle Grinding Wheel (5Pack - 4" x 60#)

  • 【RUST REMOVAL WHEEL MATERIALS】: Black Diamond Cup Wheel - The black diamond material is a high-strength, high-wearing honeycomb soft abrasive tool formed by combining high-strength wear-resistant fiber mesh as a substrate and organically combining resin elastomer and high-quality corundum with a special process..
  • 【RUST REMOVER PAINT SIZE】: 4" x 60# (100*16mm) : Diameter 4"，Thickness 3/5"，Aperture 5/8", Maximum speed 12500 (R.P.M), Maximum speed 80, Abrasive grain size - black silicon carbide 46#.
  • 【SCOPE OF APPLICATION】: Wheel rust remover applies for sanding interface grinding, oil pipe burr removal, ceramic bottom polishing c1/2ar surface paint removal and so on. Easy to strip discs clean & remove paint, rust and oxidatio. 4" polycarbide abrasive wheel great for removing paint or rust from metal, but also on wood or fiberglass surfaces..
  • 【FITS ANGLE GRINER TOOL】: Our paint removal grinding wheel is designed for 4" with 5/8" arbor striper of various models angle grinders. DOES NOT FIT WAGNER PAINT EATER. Please make sure the arbor size and the outer diameter match y....
Check Stock

PNBO Arbor Press 1 Ton,Ratchet Leverage Arbor Press with Handwheel,Manual Desktop Punch Press Machine Metal Arbor Press Tool,for Stamping,Bending,Stretching,Forming

  • This arbor press can apply up to 1 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 4.33in/110mm..
  • The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • Our arbor press is made of high-quality cast iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • Ratcheted Arbor Press is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock

Festool 575387 Plunge Cut Track Saw Ts 55 Req-F-Plus USA

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts..
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade..
  • This reduces the chance of kickback. Antistatic function.
  • Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal..
Check Stock

Festool Saw TS 75 EQ-F-Plus-FS US

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts..
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback..
  • The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor..
  • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal..
Check Stock

Bosch DD500 5-Inch Premium Segmented Tuckpointing Blade

  • High-quality diamonds and easy-to-understand color coding system. Dry cutting. For mortar removal. For use in small angle grinder..
  • Solid 0.25 Inch thick segment provides long life.
  • Fast cutting in most grout and mortar materials.
  • Premium diamond formulation for aggressive material removal.
Check Stock

SENDUO Arbor Press 1 Ton,Ratchet Leverage Arbor Press with Handwheel,Manual Desktop Punch Press Machine Metal Arbor Press Tool,for Stamping,Bending,Stretching,Forming

  • 【CARBON STEEL MATERIAL】:Our arbor press is made of high-quality cast iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • 【1 TON PRESSURE】: This arbor press can apply up to 1 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 4.33in/110mm..
  • 【STABLE BASE】: The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • 【SLOTTED TABLE-PLATE】:The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • 【VARIOUS APPLICATION】:Ratcheted Arbor Press is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock

Palmgren Arbor press, 1 ton

  • High Quality Steel Body Design: Made of high quality Steel material, this 1/2 ton arbor press features simple structure, stability and reliability.
  • 4-Position Plate: The hand press comes with an anvil plate, It is slotted for various application and can be moved and replaced.
  • Strengthened Base: Designed with thickened and solid base, pre-drilled for mounting on either a bench or pedestal to keep the rivet press sturdy.
  • Easy Operation: This arbor press attachment can apply 1/2 ton of force to facilitate installation, removal, and pressing of items by lowering the steel ram through a leverage.
  • Application: It is suitable for riveting, squeezing, punching, bending, and other pressing applications with different accessories, widely used in assembly and repair industries.
Check Stock