New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check StockRUB1ZR0 Boresighter Kit Precision Alignment Bore Sighter with 16 Pieces Adjustable Arbors
- Our bore sighter kit is suitable for air guns and shotgun with a short range（less than 100 yards). It contains a multi-caliber collimator and different arbors..
- This kit includes 15 arbors for .177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50. It also contains a screwable arbor from 12 to 20..
- The boresighter kit makes sighting much easier by aligning the scope's reticle with the barrel. Help you pre-zero easily without wasting ammo or range time..
- The boresighter and different arbors are nicely packaged in a blow-molded case. The box is marked with a scale and can be easily put back after use..
- No longer need to purchase a separate bore sight to match the use of different products. This kit is a good beginner kit if you don't know where to start..
Check StockLenox Tools 1779810 3.25-Inch Pilot Drill Bit for Hole Saw Arbors
- Drill bit is compatible with 2L, 5L and 6L SNAP-BACK arbors.
- Fits 2L, 3L, 5L, 6L and 7L solid-hex arbors.
Check Stock
Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check StockMetal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check StockLenox 1864904 Pilot Drill Bit for Hole Saw Arbors (Pack of 25), 3 1/4"
- The split-point pilot drill penetrates quickly, self-centers, and won't "walk" across the work surface.
- Use with 1L and 4L Solid Hex Arbors and 2L Hollow Hex Arbors..
Check StockIVY Classic 28112 Hole Saw Arbor Adaptor, Adapts 1/2-Inch - 20 thread to 5/8-Inch - 18, 1/Card
- Adapts 1/2"-20 threaded arbors to fit 5/8" - 18 threaded hole saws.
- Adapts 28100, 28103, 28104, 28105 and 28108 arbors to fit 1-1/4" through 6" hole saws.
- Hex flange for easy installation and removal.
Check Stock
LENGO Bore Sight Kit Precision Firearm Bore Sighter Rifle Boresighter with 16 Pieces Adjustable Arbors for Hunting or Shooting Scope
- [Widely Use]: This bore sight kit includes 16 arbors and comes with caliber: .177, . 22, 6mm, . 25, 6.5mm, . 27, 7mm, . 30, . 32, . 338, . 35, . 375, . 44, . 45, . 50 and 20mm. Choose a suitable arbor, though the spring clip is hard the first time..
- [Simple Operation]: Boresight kit is easy to set up. When you are using the arbors to have a loose fit, you can wrap a cloth or something around them to make a snug fit. This also helps protect the inside of the barrel..
- [Save Your Time and Ammo]: Boresighter kit will help you to boresight scope for speedy pre-zeroing and will get your scope as close to sight in as possible without shooting..
- [Professional Equipment]: The rifle bore sighter kit is 36-42mm above the barrel, the height is matching of your optics, so it will make sure you get the accuracy..
- [Convenient package]: The Hunting Boresighters and 16 arbors are conveniently packaged in a case. You can readily choose what you require and put it back after use..
- [Note]:This bore sight kit is not suitable for all gun, please see the use range, as professional equipment, please follow the manufacturer’s instructions before use..
Check Stock
HQRP On-Off Toggle Switch compatible with Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS Table Saw
- LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
- MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
- WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
- SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
- DNLK drill chuck will fit Delta Model 11-990 Type 2.
Check StockNewship Bore Sight Kit Portable Adjustable Boresighter Complete Tools Hunting or Shooting High Precision Multiple Caliber with Arbors for Handgun and Rifle
- 【Well Designed】: Well designed and made optic that allows point of aim to be set very closely. It will get your scope on target without wasting....
- 【Clear Grid】: The MOA grid is very clear, super simple to set up and get a rough sight in to prepare for a live fire range sight in, and works....
- 【15 Arbor Set】: This kit includes 15 arbors for .177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50. This kit comes....
- 【Sturdy Arbor】: Each arbor is sturdy, which is machined stainless steel with a brass tension bar to give better stability in the barrel..
- 【 Tight Fit】: Arbors will provide a tight fit so it will make sure you get the accuracy of "on the paper", and is a bit more accurate for setting....
Check StockSKIL SPT4004 7\ Segmented Diamond Saw Blade
- Ideal for cutting concrete, brick and blocks.
- Heavy duty metal construction for maximum cutting ability.
Check StockSKIL SPT4003 7\ Turbo Diamond Saw Blade
- Ideal for cutting concrete, brick and blocks.
- Heavy duty metal construction for maximum cutting ability.
Check StockPSI Woodworking CJAM10C Expanding Jam Chuck Set, 5 Piece
- Set of two Jacobs drill chucks with keys.
Check Stock
