Categories

Best Arc Flash Gear

National Safety Apparel C09UPLCLG42 Ultrasoft Lab Coat, 88% Cotton, 12% Nylon FR, Large, Navy

  • Lab coat for protection against arc flash, flash fire, and lab contaminants.
  • 9-oz. UltraSoft fabric for resistance to flash fire and electric arc.
  • Left breast pocket and two lower lab pockets to hold items.
  • Pass-through slits on sides for access to inner clothing.
Check Stock

National Safety Apparel Class 0 Black Rubber Voltage Insulating Gloves, Max. Use Voltage 1000V AC/1500V DC (GC0B10)

  • 1 pair of black Class 0 Voltage Rated Gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1000V AC/ 1500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT: Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION: Ideal for arc flash & general FR applications.
  • To ensure you’re ordering the correct glove size, measure the circumference around your palm.
Check Stock

National Safety Apparel C09UPLC2X42 UltraSoft Lab Coat, 88% Cotton, 12% Nylon FR, XX-Large, Navy

  • Lab coat for protection against arc flash, flash fire, and lab contaminants.
  • 9-oz. UltraSoft fabric for resistance to flash fire and electric arc.
  • Left breast pocket and two lower lab pockets to hold items.
  • Pass-through slits on sides for access to inner clothing.
Check Stock

National Safety Apparel Class 00 Yellow Rubber Voltage Insulating Glove Kit with Leather Protectors, Max. Use Voltage 500V AC/ 750V DC (KITGC0010Y)

  • KIT INCLUDES: Pair of Class 00 Rubber Voltage Insulating Gloves.
  • Pair of 10″ Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 500V AC/ 750V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT – Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION – Ideal for arc flash & general FR applications.
  • To ensure you’re ordering the correct glove size, measure the circumference around your palm..
Check Stock

National Safety Apparel Class 00 Black Rubber Voltage Insulating Glove Kit with Leather Protectors, Max. Use Voltage 500V AC/ 750V DC (KITGC0008)

  • KIT INCLUDES: Pair of Class 00 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 500V AC/ 750V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • To ensure you're ordering the correct glove size, measure the circumference around your palm..
Check Stock

Flame Resistant FR Shirt - 88/12 (Small, Light Grey)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton /12% Nylon twill light weight fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Minimum Arc Flash rating (ATPV) is 12 Cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
  • DESIGN & SIZING: Full sleeve with cuffs. Western style front open with Pearl Snap buttons. Action back pleats. 2 breast pockets, with flaps and snap closure. Pen slot on left breast pocket. Designed with optimum Safety, Performance, Style and Value in mind. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 Cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system..
  • WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend l....
Check Stock

National Safety Apparel Class 2 Yellow Rubber Voltage Insulating Glove Kit with Leather Protectors Max. Use Voltage 17000V AC/ 25500V DC (KITGC2Y10)

  • KIT INCLUDES: Pair of Class 2 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 17,000V AC/ 25,500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • To ensure you're ordering the correct glove size, measure the circumference around your palm..
Check Stock

National Safety Apparel Class 00 Red Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 500V AC/ 750V DC (KITGC0011RAG)

  • KIT INCLUDES: Pair of Class 00 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 500V AC/ 750V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

International Enviroguard Disposable Polypropylene Coveralls (Blue) (Case Of 25) (L, Elastic Wrist, Hood & Boots)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon blended twill fabric. Fabric weight is 7 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety & durability.
  • DESIGN & SIZING: Full sleeve with cuffs. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left upper arm. Side vents for inner access. Pen slot on left breast pocket. Elastic on each side of waist for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system..
  • WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend ....
Check Stock

National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 1,000V AC/ 1,500V DC (KITGC009AG)

  • KIT INCLUDES: Pair of Class 0 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1,000V AC/ 1,500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

National Safety Apparel Class 0 Black Rubber Voltage Insulating Glove Premium Kit with FR Knit Glove and Leather Protectors, Max. Use Voltage 1,000V AC/ 1,500V DC (KITGC010AG)

  • KIT INCLUDES: Pair of Class 0 Rubber Voltage Insulating Gloves.
  • Pair of 10" Leather Protectors for gloves.
  • TESTED: Each pair of rubber voltage insulating gloves has a maximum use voltage of 1,000V AC/ 1,500V DC and is newly tested and stamped with test date.
  • Rubber Voltage Insulating Gloves should be worn with leather protectors.
  • COMPLIANT - Rubber Voltage Gloves are NFPA 70E-2015 compliant for arc flash.
  • CSA Z462-15 compliant for arc flash (Canada).
  • ENHANCED PROTECTION - Ideal for arc flash & general FR applications.
  • ADDED COMFORT & PROTECTION - ArcGuard 12 Cal FR Knit Gloves can be worn with Rubber Voltage Gloves as a liner for added protection & comfort..
Check Stock

Flame Resistant FR High Visibility Hi Vis 88% C/12% N Pant/Trouser. (44W x 34L, Khaki)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88%C/12% twill Fabric. Fabric Weight 9 oz / sq yd. Fabric complies to ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 17 Cal / cm2 and complies with HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI/ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.
  • DESIGN & SIZING: Heavy duty Nomex tape FR Brass zipper. Classic regular fit to provide a work friendly cut and a classic look. Proprietary “Flex fit” hidden elastic in waist to provide comfort flexible fit. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Two quarter cut front pockets and two back pockets Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 17 Cal / cm2). UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system.
  • WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend life and minimize shrinkage. Follow Wash and Care instructions pro....
Check Stock

Flame Resistant FR High Visibility Hi Vis Coverall - 88% C/12% N (Medium, Khaki)

  • MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon twill fabric. Fabric wt. is 7 oz. Fabric complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
  • DESIGN & SIZING: Full sleeve. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
  • COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). ANSI / ISEA 107 Class 3 Compliant UL Certified (check ....
Check Stock