Categories

Best Arc Spraying Machine

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • ..., the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine).
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness....
Check Stock

165Amps Mig Welder, Dual Voltage Mig Welding Machine, Mig/Stick/MMA/Lift TIG Welder Machine, Gas Gasless Flux Wire Core Welder (MTS-165D)

  • [Multiple welding mode]: MTS165D adopts dual-voltage(110/220V) design, which can automatically read and indicate after power-on. Using IGBT inverter technology, it has high output efficiency, good dynamic performance and good load adaptability. The welding machine is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG/2T/4T..
  • [Synergic Function]: One intelligence control system automatic compensate and adjust current/voltage.10 levels precise adjustment from -5V to +5V, Coordinate control mig wire feeder’s speed and current, which makes the machine easy to heat arc and instantaneous Increase the current convenient for striking the arc..
  • [Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces and achieve smooth arc. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect. Very friendly for green hand and DIY users..
  • [Automatic Protection Function]: Automatic voltage and current control, built-in energy-saving fan automatically regulates the temperature and prevents overheating and dust enter.VRD against electric shock design makes welding workers safer..
  • [Easy to Use]：Friendly operation interface, front panel detailed identification with precise digital display. Fr....
Check Stock

Amico ARC-160 Professional 160-Amp Stick Arc Lift-TIG Welding Machine 80% Duty Cycle 100-250V Wide Voltage Welder

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures....
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

Amico ARC-200 200-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Amico ARC-180DC 180-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-180DC is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100-250V/50-60Hz input powers. Almost all of....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 180 amps ensures....
  • ARC-180DC has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-180DC Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it....
Check Stock

AeasyG Disinfection Fogging Machine,Mist Thermal Fogger Machine,Engine Gas Powered Backpack Sprayer Fogger Mist Blower Sprayer/Mist Blower with 2 L Tank Type 80

  • Fogger INCLUDES STRAP - The cordless fogger SF210 battery powered cold fogger machine will help you disinfect, clean and keep those pests far away! Within 10-15 minutes, our Sanifog fogger machine will help you to sanitize hospitals, office room, school, restaurant and home areas with easy..
  • Foggers for disinfecting, cordless : Our ULV fogger head hose is adjustable to any angle, instant switching on/off, thermal fogger, efficient and convenient. Sanifog electric sprayer can be used with liquid disinfectant..
  • Sanitizer fogger: High power motor, super speed sprayer sanitizing fogger machine. Disinfecting fogger for Quick spraying, solution and labor saving. Rotating spraying, without any blocking..
  • Fogger Machine Disinfectant : 22-feet of Spraying Range | ULV cold fogging technology | Battery-powered & Portable | Rechargeable Lithium-Ion Battery 30ah | Operating Time Up To 3 hours.
  • Spray disinfectant aerosol to quickly sanitize any area..
Check Stock

250Amp MMA Welder, TEWLEN ARC Welding Machine Kit, Portable 110V IGBT Digital Display LCD Hot Start Welder Electric Welder Machine with Electrode Holder,Earth Clamp,Mask,Brush,Welding Rods,Gloves

  • 【Intelligent IGBT Inverter Welder】Arc welder machine adopt advanced IGBT inverter technology, superior arc welding performance,good arc stability, can reduce copper and iron damage, improve the efficiency and reliability of the welder, less spatter, and smooth weld, achieve perfect welding. The welding machine supports the use of 3/32'' -1/8'' (2.5mm-3.2mm)welding rods, suitable for welding various metals such as welding carbon steel,welding mild steel,weld steel, stainless steel and cast iron..
  • 【Safety and Durability Welding】250Amp stick welder features with anti-sticking device, hot start, arc force over protection, and built in fan helps to dissipate heat. It can prevent overheating, overcurrent, and overload, pure copper core cable, makes the current output stable to ensure safe operation. Durable MMA welding machine, stable and reliable, light weight, energy-saving, no electromagnetic noise, and can be widely used for home general repair work and fitment of inside or outside..
  • 【Simple Operation】Electric welding machine with LCD display and full-digital control system makes easy to read and use, novices can use it for practice. Any welding work can be easily started,the current adjustment range is 20A to 250A,it can be adjusted accordin....
Check Stock

Mophorn 40W 50L Electrostatic Powder Coating Machine with Spraying Gun Paint 550g WX-101 Powder Coating System (40W 50L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, electrostatic through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction....
Check Stock

Powder Coating Machine 50W 45L Capacity Electrostatic Powder Coating Machine Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder’s rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work’s various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless steel.
  • it has rust prevention and corrosion resistance advantages. Large capacity supports uninterrupted work. Its thickened construction he....
Check Stock

Mophorn 50W 45L Electrostatic Powder Coating Machine with Spraying Gun Paint 450g Per Minute WX-958 Powder Coating System (50W 45L)

  • High Efficiency Powder Coating System: The electrostatic powder coating system machine is designed for DIYers and handy persons. Perfect for spraying big projects like a ship, bridge, hardware, garage, fitness equipment, and more. It features two interior gas designs so that the needle is no longer needle-guided fluid powder to enhance the discharge effect and improve the powder's rate..
  • Simple Control Panel: Each function is clearly labeled, so you can conveniently adjust the powder, air, rinsing air, kV, uA through the knobs. The rinsing air can clean the machine and extend the service life. It is also easy to operate with an OFF/ ON switch. This control panel ensures the perfect spray effect and satisfies your work's various needs..
  • Powder Coating Gun: This Coating machine features a strong electrostatic spraying effect, providing a consistent and smooth finish. Meanwhile, it is powder-saving. With different nozzles, you can spray diffusion and fan-shaped coatings. Also, you can adjust the spraying distance by using big or small nozzles..
  • Excellent Quality: The 45L powder bucket adopts high-quality stainless st....
Check Stock

AHP Alpha-TIG 225Xi 200 Amp IGBT AC/DC Pulse TIG/Stick Welder 110v/220v Dual Voltage

  • Synergic Function: this mig welder designed basic at One-Knob Intelligent control system. Mig machine can automatic compensation and adjustment of....
  • 110/220V Dual Voltage: This mig welder is dual voltage 110/220V, Machine will auto indicate the input AC voltage, Max output current is 165A, Duty....
  • Lift Tig, 2T/4T Gas/Gasless Function: Machine with Lift TIG function, It is IGBT inverter Gas/Gasless mig welder, Use 0.030’’(0.8mm) Solid and....
  • Arc force, Hot Arc, VRD: This mig machine will auto control voltage and current to achieve smooth arc, This mig welder quite easy using for the Newer....
  • Mig Welder, What’s come with machine: 1 x Mig machine, 1 x 3meters Mig torch, 1 x Ground clamp with 3meters cable, 1 x Stick holder with 3meters....
Check Stock