Categories

Best Arduino

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Keywish Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P with 30 Lessons Tutorial Compatible with Arduino IDE Mixly Mblock Graphical Programming

  • ✔ High-quality kit: Contains 48 electronic components Kits for Arduino,which fully meet the components required by beginners.All of the Components, breadboard and Integrated Circuits are individually packaged and labeled, and packing in a plastic box.Instruction Link：https://github.com/keywish/keywish-uno-starter-kit.
  • ✔ Graphics programming: Support scratch 3.5, MagicBlock based on Arduino platform, easy to learn and improve writing efficiency..
  • ✔ Strong compatibility: 100% compatible with Arduino UNO R3, NANO,for Arduino IDE, Mixly and Mblock..
  • ✔ Free video tutorial: Comes with tutorial. Free 30 Lessons PDF tutorial from Official website download or you can contact our customer service..
  • ✔ Different gifts: Exquisitely packaged. This is the perfect starter kit for arduino,which as a gift for students, children and friends in the school season, Christmas, New Year, birthday, parties, performances, special occasions, etc..
Check Stock

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock

Arduino Nano [A000005]

  • The Arduino Nano is one of the smallest Arduino boards available on the market.
  • Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check Stock

Adafruit ATWINC1500 WiFi Breakout

  • Good when you want a lower-power and lower-voltage setup.
  • Same core chip in the Arduino UNO/Duemilanove/Mini/etc.
  • 95% of Arduino projects will work out of the box.
Check Stock

Bluetooth Thermometer

  • Read temperature from a bluetooth enabled development board (Arduino, Raspberry Pi , ...).
  • Read schematics for an Arduino development board.
  • Write simple Arduino code to send the data.
Check Stock

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

Arduino Mega 2560 REV3 [A000067]

  • Arduino Mega 2560 is designed for your most ambitious projects which require additional pins and extra memory.
  • Based on the 8-bit AVR microcontroller ATmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches.
  • Compatible with most shields designed for the Arduino Uno.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users..
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

KEYESTUDIO Multi-Purpose Shield V1 with Buzzer LED Temp Light IR Receiver for Arduino Controller R3 and MEGA2560

  • 【2 in 1 Robot Kit and Electronics Kit】-This tank robot car kit is compatible with Arduino and Mixly ((block programming platform) , ideal for Arduino beginners and professionals to learn robotics, electronics and programming.Teenagers or adults can learn coding from Scratch to Arduino after assembly and get a lot of fun of making..
  • 【Automatically Drive/Motion Control】-Keyestudio robot kit has many excellent functions, detecting, avoiding and following obstacles.
  • using 8X16 LED panel to display the movement status. You can also use infrared remote control and Bluetooth APP to control it (support iOS and Android).Have fun in the process of learning Arduino..
  • 【Simple Assembly】-With a detailed tutorial for assembling it，and all parts are named and organization. Four cartoon animal heads have been added to the kit so that you can install them on the ultrasound module,assemble with your child, it will be a wonderful experience!.
  • 【Project-Based Tutorials for Coding】-This programmable robot supports Arduino IDE.15 detailed online projects, from simple to complex,easy to learn coding, robotics and electronics through games. Stimulate your creativity through hands-on experience..
  • 【KEYESTUDIO Technical Support】About this ....
Check Stock