Categories

Best Arduino And Motor Shields

Arduino MKR ETH Shield [ASX00006]

  • Expansion shield to bring your Arduino board online with simple-yet-reliable communication libraries, supporting TCP and UDP protocols over an Ethernet cable..
  • Rich collection of examples: browse the Internet, make a tiny web server, and send data to a cloud with little coding effort..
  • Use its micro-SD card slot to store sensor information, serve files to 8 simultaneously connected devices, or log traffic..
  • Stackable : other shields can be stacked on top of it adding new functionalities to your projects..
  • No extra power needed, gets it from your Arduino board. It is true plug and play!.
Check Stock

ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0

  • The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
  • The Digispark is shipped fully assembled except for the two included and easy to solder headers..
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega + 2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

REXQualis Super Starter Kit Based on Arduino UNO R3 and Electronics Component Fun Kit

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • REXQualis Electronics Component Fun Kit is a Highest Cost Components Kit, It comes with more than 400pcs sensors and components for fun and simple electronic projects..
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service..
Check Stock

SZDoit Professional Smart Robot Tank Car Chassis miniTP101, Remote Control Robotic Platform for Arduino Raspberry Pie Learning Kit, RC Crawler Robotics, Remote Control Tracked Car Caterpillar Chassis

  • [Rich Manual]: The assemble manual is attached with the items. More details, can be found at gitnova. We provide many types of smart robot tank car chassis for you, also provide the referred Arduino source code controlled by WiFi, Bluetooth, and ps2..
  • [Good Helper]: Learn to robot assembling.
  • learn to Arduino / raspberry pie project learning.
  • when you get the robot chassis miniTP101, you will firstly install it, and then code programming on the controller, e.g., Arduino, to drive the car move..
  • [Good Price]: This smart car chassis is made by metal frame with 2 high torque DC motor with big batches once time in ourselves factory. So it has the good price for this robot crawler car chassis. Also, we open many plastic, rubber, metal mould for the robot chassis. Anyone can contact us if have a good quantity..
  • [Good Motor]: This car chassis is assembled by 2pcs high torque motor, which can have a good performance for the tracked robot chassis research. It will help you to realize the functions by coding using python or C computer language. Together with the electronics controller, one can DIY the remote control robot chassis fast and easily..
  • [What You Get]: All the metal part, 2pcs track (the length can be changed as any l....
Check Stock