Categories

Best Arduino Battery Connector

5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

DZS Elec 6pcs 15CM 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable With 5.5x2.1mm DC Male Plug for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Standard 5.5x2.1mm DC Male Plug, conveniently connect to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector with DC 5.5x2.1mm Male Plug (NO battery included).
Check Stock

Battery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY

  • Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
  • 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
  • The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
  • Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
  • This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check Stock

10 Pack 9V Battery Clip Connector, T Type Faux Leather Long Cable Housing Connection

  • Proper design: these 9 Volt battery clip connectors are designed simply with bare ends, which is convenient to install to replace a broken battery connector on your electronic device without applying wire strippers.
  • Application: you can apply these connector clips for power supplies or other devices.
  • They also can serve for DIY battery holders with the same battery clip connectors, and great for LED strip lights or Arduino.
  • Good material: the battery connectors adopt sturdy plastic housing and metal material, which plays a useful protective role, and allows the item not to break easily.
  • Simple operation: compact size, ideal replacements for replacing your old or damaged ones..
  • Package: includes totally 10 pack 9 Volt battery clip connector buckles.
Check Stock

AA Battery Holder Besmelody 4 x 1.5V 6V AA Battery Storage Box with 9V Snap Clips Connector Plastic Housing 2 Layers Battery Case

  • AA battery holder with 9V snap connector is designed for 4-slot 1.5V AA standard or rechargeable batteries.
  • 4 AA Battery Holder Body Size: 6 x 3 x 3cm /2.36" x 1.18 " x 1.18 "(L*W*H).
  • Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
  • Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
  • Package Contents: 2x 4 AA Battery Holder.
  • Besmelody 18-month warranty and friendly customer service..
Check Stock

4xAA Battery Pack Holder Case Box to DC Barrel Jack Connector Compatible with Arduino(Pack of 2)

  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
Check Stock

Aridea Rechargeable Lithium Ion Battery Pack - 3.7V 6600mAh 3.9 inch 10cm Cable JST PH Connector Blue 1.0

  • 6600 MAH CAPACITY- 3.7V battery- Provide power for Raspberry Pi and Arduino systems, as well as many other products.
  • BUILT-IN OVER/UNDER CURRENT PROTECTION CIRCUIT- Automatic protection from low voltage drain or overcharging damage (2.75V cut-off).
  • 10cm (3.9 INCH) BATTERY CONNECTOR CABLE- Provides placement flexibility, along with a genuine JST 2-Pin connector.
  • DIMENSIONS and WEIGHT- 65mm L x 54mm H x 18mm D, 150g = 2.55 inch L x 2.125 inch H x 0.70 inch D, 5.29 oz.
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

ACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328

  • for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
  • PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
  • Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.
Check Stock

SDTC Tech 2-Set 4X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 6 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 4x 1.5V AA batteries, and ouput voltage is 6 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 4 AA Battery Case Size is 57 * 32 * 29mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 4x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock

SDTC Tech 2-Set 8X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 12 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 8x 1.5V AA batteries, and ouput voltage is 12 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 8 AA Battery Case Size is 63 * 58 * 30mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 8x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock