Categories

Best Arduino Mega 256usb Cable

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega + 2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

Makeronics Microcontroller Board and RAB 7-in-1 Breadboard Holder with USB Cable Compatible with UNO R3 Board ATmega328P and Arduino IDE

  • RAB 7-in-1 breadboard holder is suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project..
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • Powered via the USB cable or power it with an AC-to-DC adapter or battery to..
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

ACEIRMC 2pcs for MEGA 2560 PRO Embed CH340G/ATMEGA2560-16AU Chip with Male Pinheaders Compatible for Arduino Mega2560 Module

  • MEGA 2560 PRO Board Embed CH340G/ATMEGA2560-16AU Chip with Male pin headers, Compatible for arduino Mega2560 DIY.
  • Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G..
  • Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board..
  • Board for functionality similar to the compatible for Arduino Mega 2560..
  • The board used the chip CH340G as converter UART-USB..
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

PZRT 12pcs M5x10 Terminal Block Screws with 12x12mm Square Washers, Nickel Plated Carbon Steel, Silver

  • MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Arduino MEGA2560 projects to industrial control applications. Applications for Arduino MEGA2560 R2 / R3 ( NOTE: the item not include Arduino MEGA2560)..
Check Stock

Geekworm Raspberry Pi 4B/3B+/3B RAB Holder Platform Breadboard Holder Base/ABS Case/Education Platform for Arduino UNO Mega 2560 / Raspberry Pi 4 Model B and 400/830 Points Breadboard

  • This RAB plate holder is widely compatible with not only Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B/B+ but also Arduino Uno, Mega2560, also support both 400 points breadboard and 830 points breadboard..
  • Access to all consumer ports: TF cards, HDMI and USB cords, very convenient for your DIY porjects.
  • Portable, easy to move, carry, this RAB holder is stable to fixed on the table for your needs..
  • Excellent Tool in education and DIY project for Raspberry Pi and Arduino UNO Mega 2560..
  • Wiki for reference: raspberrypiwiki.com/RAB_Holder.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Dorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi

  • 37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
  • All components compatible with Arduino IDE, can be used directly..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
  • Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..
Check Stock