Categories

Best Arduino Micro Usb Power Supply

Yahboom Microbit Halo Programmable Expansion Board Compatible with Arduino Voice Control Colorful LED RGB Lights Compatible with Micro:bit V2 (Without BBC Micro:bit)

  • The microphone is installed on the expansion board, which can realize the function of sound controlling light.For example, the bigger the decibel, the more LED lights will be on. Compatible with Micro:bit V2 & V1.5, Micro:bit NOT Include.
  • Not only can micro USB power supply be used, but also 2 AAA batteries can be used to supply power. Even playing outdoors, there's no scruple about it..
  • Micro:bit expansion board is designed with building blocks hole to match your building block suite and find more interesting games..
  • Programmable halo can be compatible with arduino, but you needs to weld the needles on the expansion board by yourself, and no needles and arduinoin are provided the packaging..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
  • The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
  • This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

Universal AC DC 5V 1A 2A/2000mA Power Supply Cord Adapter Charger with 8 Variable Plug Tips (Include 5.5mm / 3.5mm / Mini USB/Micro USB / 4.7mm Switching Connector)

  • 【Universal 10W Power Supply】AC input: 100-240V 50 60Hz.
  • DC Connector size: 5.5*2.1mm. (Can Fit for 5V 1A 1.5A 300ma 500ma 700ma 1000ma).
  • 【Widely Used DC 5V Power Cord】This 5V Charger Fit for Vizio sound bar, for Digitnow record player, for Polaroid record player, for Raspberry Pi, 5V Baby Monitor, Arduino/DIY Project, LED strip light, Webcam, HDMI products, Audio/Vedio, Android TV Box, LCD monitor, Kindle, Router, Photo frame, Bluetooth Speaker, Radio, IP/CCTV Security Camera, Tascam Recorder, USB HUB, DJ controller, Nextbook, Android Tablets, micro USB connectors for most smart phones and More 5V Device..
  • 【Get $5 worth of 8 connectors】This 5V 2A Power Cord offer More Selective with Micro-USB / 4.0*1.7mm / 3.5*1.35mm / 5.5*2.5mm / 3.0*1.1mm / 2.5*0.7mm / Mini-USB / LED Terminal Connector..
  • This 5 volt dc power supply offfer OverCurrent / OverVoltage / OverHeat / Short Circuit Protection..
  • 【Kindly note】If your device requires more than 2A (2000mah) then it will not be compatible. Only If your device requires less than 2A then it will work well and safely..
Check Stock

Ximimark 2Pcs Micro USB 18650 Battery Shield Expansion Board Wemos ESP32 V3 Cable Development Tool LED for Arduino and Raspberry Pi（with Cable）

  • This module can be used to power both Arduino or Raspberry Pi and sensors..
  • The output current of this mode can reach 2A, which can supply power to many control boards..
  • Battery protection (overcharge or overdischarge)..
  • Micro USB port input, Type A USB output..
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • http://www.wch-ic.com/download/list.asp?id=127 (windows).
  • If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • http://www.wch-ic.com/download/list.asp?id=127 (windows).
  • If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

Volvox sp, Living

  • ...s Application】Lab power supplies have passed CE & FCC Certification. 120V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
  • 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during use. DC power supply is very light and portable, with a size of only 3.3 x 9.4 x 6.1 inches and a weight of only 2.6 pounds. You can easily take the DC power supply to work..
  • 【5V/2A USB Port, Intelligent Cooling Fan, High-quality Materials】The DC power supply is equipped with a 5V/2A USB port, you can charge your mobile phone, tablet or other devices. When the working temperature of the DC power supply exceeds 122℉/50℃, the cooling fan is turned on intelligently, which can effectively dissipate heat. , Reduce working noise and prolong the ....
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

REXQualis Super Starter Kit Based on Arduino UNO R3 and Electronics Component Basic Kit Comes with More Than 300pcs sensors and Components

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • REXQualis Electronics Component Basic Kit is a Highest Cost Components Kit, It comes with more than 300pcs sensors and components for fun and simple electronic projects..
  • REXQualis Electronics Component Basic Kit include a breadboard power supply, and come with a USB Power Cables, which is hard to find..
Check Stock

Argon ONE Raspberry Pi Micro USB Cable Power Supply 5.25 Volts 3 Amps | UL Listed | 3.3 Feet Long Cable with Micro USB Connector | Micro USB Cable and Wall Charger

  • This Argon Raspberry Pi 3 Power Supply was designed to support Raspberry Pi boards up to the Raspberry Pi 3 Model B+ Boards inside the Argon ONE Rpi3....
  • Voltage Output 5.25 volts DC and 3 Amps Regulated Current | Power Input 100V to 240V AC | 1m / 3.3 ft length USB Charger with built in Micro USB Cable.
  • Allows maximum usage of Raspberry Pi 3 boards under various projects thanks to avoiding under voltage caused by additional accessories on the....
  • While the Argon Power Supply is primarily a Raspberry Pi Power Supply it can also power devices that need a micro usb fast charger or micro usb phone....
  • This Raspberry Pi 3B Power Supply has built-in safety checks to ensure that it can safely be used, even as a MicroUSB Wall Charger at the comfort of....
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock