Categories

Best Arduino Mkr 1200

Arduino MKR GPS Shield [ASX00017]

  • A plug 'n' play shield for experimenting with monitoring fleets, high-altitude measurements, or any kind of project requiring localization of devices..
  • Arduino MKR GPS Shield uses the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the Arduino MKR boards, but thanks to its Eslov connector, it is also possible to hook it up to any board..
  • It comes with a dedicated library that allows two different interfaces and offers a consistent set of APIs designed for a full usage of the GPS acquired information..
  • Operating voltage is 3.3V, but this shield comes also with an on-board holder for CR1216 batteries..
  • The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. The extra I2C port, also referred to as the Eslov self-identification port comes with: SDA, SCL, GND, +5V, and an extra digital pin, meant to send an alarm to the otherwise plain I2C devices connected to it..
Check Stock

Arduino MKR IoT Bundle [GKX00006]

  • Learn the basics behind the Internet of Things, build your own connected devices, and control your Arduino MKR 1000 board over the Internet..
  • With 5 step-by-step tutorials on Arduino’s online platform, includes all the components needed for those and more!.
  • Connect to the dashboard of Arduino’s IoT Cloud: log, graph and analyze sensor data, trigger events, and automate your home or business..
  • Display information locally using the LCD display, or activate mechanical devices with one of the two motors in the kit..
  • Power the board from the USB port, or using the included battery connector (battery not included)..
Check Stock

Arduino MKR WiFi 1010 [ABX00023]

  • MKR 1010 simplifies the prototyping of WiFi-based IoT applications, easily connected and configured to other Arduino products. You do not need to be a network expert!.
  • The hybrid WiFi / BLE connectivity module has a low power consumption mode, improving the life of your batteries..
  • Ideal for: Entry point to and professional IoT, building wireless sensor networks in minutes, remotely operated devices..
  • Cloud features: the board can connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. It is also possible to connect your board to different Cloud services, including Arduino IoT cloud!.
  • Simply to power with a USB cable or external Li-Po 3.7V battery. Recharge the battery through the USB port..
Check Stock

Arduino OPLA IOT Kit Cloud IOT Starter Kit

  • ... comes with one MKR Wi-Fi 1010 board, one MKR IoT Carrier with a round OLED color display, integrated on-board sensors (temperature, humidity, pressure, and light), two 24 V relays, five capacitive touch buttons, SD card holder, PIR, IMU and moisture sensors, and much more..
  • The includes 12 months FREE access to the Arduino Create Maker Plan - the premium subscription to Arduino online coding platform. Benefit from unlimited compilation time, support for third parties boards, 15 days retention of your data, and a host of more premium features. Manage all of your code online, and access it from wherever you are..
  • The open system enables the development of fully customised smart devices.
  • controlling what you want, how you want to. The kit provides access to 8 out-of-the-box activities + 2 ‘getting to know’ guides, for any user that wants to transform their home into a smart one - build your own modern thermostat, remotely control your lights or water your plants while you’re out of town!.
  • The device can either be powered directly through a USB cable from your computer or by 18650 Li-Ion 3.7V battery (battery is not included)..
Check Stock

Arduino Portenta H7 [ABX00042]

  • Two processors that can run tasks in parallel with both cores communicating with one another. Each core can execute Arduino, mbedOS, micropython, and TensorFlow Lite code..
  • Comes in the Arduino MKR form factor but includes two extra 80-pin high density connectors. Extend your Portenta H7 to physical interfaces like Ethernet connectors, CAN bus peripherals, extra GPIO pins, SD card, etc..
  • Onboard WiFi and Bluetooth connectivity up to 65 Mbps transfer rate (using an external antenna)..
  • Perfect for high-end industrial machinery, laboratory equipment, computer vision, PLCs, robotics controllers, or even dedicated stationary computers..
  • Main features: industrial temperature rates, 8MB SDRAM, 16MB NOR Flash, DisplayPort output, USBC connector, cryptochip for secure data transactions..
Check Stock

Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega

  • This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ /....
  • It can be assembled very flexibly as a semi-closed enclosure, or as a two-layer bracket, or if you buy multiple sets, it can be used as a Raspberry Pi....
  • The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or....
  • The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material..
  • Packing list: 2x covers, 8x M4x40mm standoffs, 4x M4x10mm spacers, 4x M4x8mm screws, 16x M2.5x6mm screws, 8x M2.5x10mm spacers (for Arduino MKR module....
Check Stock

8ct Mkr BL Clas Wash

  • Broadline tip for drawing thick lines and coloring large areas.
Check Stock

M5stack M5StickC Plus ESP32-PICO-D4 Mini IoT Development Kit Deauther Watch Support BLE 4.2 and WiFi Big ger Screen IoT Controller for UIFlow and MicroPython and Arduino

  • [Practical link]: ★Video ★GitHub ★Arduino Library and ★CP210X driver installation tutorial: Please get the link from the following roduct guides and documents.
  • [Upgrade]: The improvements of StickC PLUS to StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen), add a G25 pin output, 120mAh battery and more stable hardware design..
  • [Mini but Powerful]: The M5 StickC PLUS supports UIFlow, MicroPython and Arduino. Its compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU, etc..
  • [Parameter]: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Blue tooth and 4MB flash memory..
  • [Notice]:Baud rate supported by M5 StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K.
  • G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input..
Check Stock

Arduino The Official Starter Kit Deluxe Bundle with Make Getting Started The Open Source Electronics Prototyping Platform 3rd Edition Book

  • Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source....
  • Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback.
  • Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart.
  • Includes a total of over 200 electronic parts and components.
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

Grote 49322 MicroNova Dot LED Clearance Marker Light with Grommet

  • grote clr/mkr, red, led, round, micronova p2 with grommet (49322).
  • grote 49322 micronova dot led clearance marker light with grommet.
Check Stock