Best Arduino Nano Specifications
ACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328
- for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
- PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
- The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
- Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
- Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.
Check StockThe Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)
- http://www.wch-ic.com/download/list.asp?id=127 (windows).
- If you need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
- More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check StockArduino Nano [A000005]
- The Arduino Nano is one of the smallest Arduino boards available on the market.
- Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
- Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check StockSunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board
- For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
- Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
- 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
- Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
- Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries
- Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
- Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
- Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
- With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
- ! ! ! Not fit for Arduino Nano, Effect pedals..
- Any quality issues, please feel free to contact us..
Check StockELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
- The cheapest and most basic electronic components kit for Arduino beginner.
- Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them..
- With the newest UNO R3 development board + USB Cable and all the basic components..
- Nice package in the box with clear listing and CD..
- 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit..
Check Stock6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries
- Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
- Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
- With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
- Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
- Not fit for Arduino Nano, Effect pedals..
- Any quality issues, please feel free to contact US..
Check StockFingerprint Heartbeat Detector
- This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
- It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
- Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
- Packed well in nice box, also each item packed well separately..
- High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check StockRaspberry Pi User Guide
- This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
- It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
- Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
- Packed well in nice box, also each item packed well separately..
- High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check StockBowie Stylophone - Limited Edition Synthesizer
- Free PDF tutorial(more than 22 lessons) and clear listing in a nice package.
- The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested..
- Lcd1602 module with pin header (not need to be soldered by yourself).
- This is the upgraded starter kits with power supply module, 9V battery with dc.
- High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO..
Check StockARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3
- Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
- 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
- It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
- Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check StockKeywish Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P with 30 Lessons Tutorial Compatible with Arduino IDE Mixly Mblock Graphical Programming
- ✔ High-quality kit: Contains 48 electronic components Kits for Arduino,which fully meet the components required by beginners.All of the Components, breadboard and Integrated Circuits are individually packaged and labeled, and packing in a plastic box.Instruction Link:https://github.com/keywish/keywish-uno-starter-kit.
- ✔ Graphics programming: Support scratch 3.5, MagicBlock based on Arduino platform, easy to learn and improve writing efficiency..
- ✔ Strong compatibility: 100% compatible with Arduino UNO R3, NANO,for Arduino IDE, Mixly and Mblock..
- ✔ Free video tutorial: Comes with tutorial. Free 30 Lessons PDF tutorial from Official website download or you can contact our customer service..
- ✔ Different gifts: Exquisitely packaged. This is the perfect starter kit for arduino,which as a gift for students, children and friends in the school season, Christmas, New Year, birthday, parties, performances, special occasions, etc..
Check StockTreedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board
- Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
- Used to reprogram the Arduino BootLoader to the microcontroller chip..
- Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
- This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
- Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock