Categories

Best Arduino Rechargeable Battery

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

AA Battery Holder Besmelody 4 x 1.5V 6V AA Battery Storage Box with 9V Snap Clips Connector Plastic Housing 2 Layers Battery Case

  • AA battery holder with 9V snap connector is designed for 4-slot 1.5V AA standard or rechargeable batteries.
  • 4 AA Battery Holder Body Size: 6 x 3 x 3cm /2.36" x 1.18 " x 1.18 "(L*W*H).
  • Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
  • Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
  • Package Contents: 2x 4 AA Battery Holder.
  • Besmelody 18-month warranty and friendly customer service..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Arduino MKR IoT Bundle [GKX00006]

  • Learn the basics behind the Internet of Things, build your own connected devices, and control your Arduino MKR 1000 board over the Internet..
  • With 5 step-by-step tutorials on Arduino’s online platform, includes all the components needed for those and more!.
  • Connect to the dashboard of Arduino’s IoT Cloud: log, graph and analyze sensor data, trigger events, and automate your home or business..
  • Display information locally using the LCD display, or activate mechanical devices with one of the two motors in the kit..
  • Power the board from the USB port, or using the included battery connector (battery not included)..
Check Stock

Arduino MKR WiFi 1010 [ABX00023]

  • MKR 1010 simplifies the prototyping of WiFi-based IoT applications, easily connected and configured to other Arduino products. You do not need to be a network expert!.
  • The hybrid WiFi / BLE connectivity module has a low power consumption mode, improving the life of your batteries..
  • Ideal for: Entry point to and professional IoT, building wireless sensor networks in minutes, remotely operated devices..
  • Cloud features: the board can connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. It is also possible to connect your board to different Cloud services, including Arduino IoT cloud!.
  • Simply to power with a USB cable or external Li-Po 3.7V battery. Recharge the battery through the USB port..
Check Stock

5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco

  • Plug Type: 2.1mm x 5.5mm Male to 9V Battery Clip.
  • Great to use for LED strip light or arduino.
  • Package contains 5 pcs 9v Battery Clips (9V battery is not included).
  • Arduino and Battery shown for example only.
Check Stock

DZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

Cyber A Necklace - AURSINC Programmable DSTIKE Bad USB Necklace | CR2032 Rechargeable Battery | HID Injector & Atmega32u4 Development Board | Attack, Control, Test Tool for Fun | for Arduino Beginner

  • [What is it] Cyber A necklace is a programmable Bad USB necklace, by executing HiD to attack.
  • also it can storage important passwords in this necklace.
  • hack computer WiFi passwords or other hacking operation.
  • [Rechargeable Battery] When the device runs out the power, no battery needs to be changed. The necklace is contained with a rechargeable 70mAh CR2032 battery and the charging circuit. Turn off the power and connect to 5v power, meanwhile the light next to the reset button will be on. The charging time will be around 40 mins. Once the device is full charged, the LED will be off..
  • [Intelligent Necklace] Once the device connects to the computer, the notebook will automatically pops out, display Arduino download address and other information and will automatically open the Dstike website, which is pre-flashed with a demo program of BAD USB. If needed, the chip can be reset and re-executed the code through pressing the reset button.
  • [Programmable BAD USB] You can actualize your idea through modifying the codes of your cyber B necklace, such as recording the important password or opening the set website or auto-executing the displaying the WiFi password command. If needed, the chip can be reset and re-executed the code through pressing the reset button.
Check Stock

5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

Makeronics Microcontroller Board and RAB 7-in-1 Breadboard Holder with USB Cable Compatible with UNO R3 Board ATmega328P and Arduino IDE

  • RAB 7-in-1 breadboard holder is suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project..
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • Powered via the USB cable or power it with an AC-to-DC adapter or battery to..
Check Stock

DZS Elec 6pcs 15CM 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable With 5.5x2.1mm DC Male Plug for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Standard 5.5x2.1mm DC Male Plug, conveniently connect to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector with DC 5.5x2.1mm Male Plug (NO battery included).
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

DFPlayer - A Mini MP3 Player

  • The DFPlayer Mini MP3 Player For Arduino is a small and low price MP3 module with an simplified output directly to the speaker..
  • It supports common audio formats such as MP3, WAV and WMA..
  • The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other....
Check Stock