Categories

Best Arduino Speaker

Arduino The Official Starter Kit Deluxe Bundle with Make Getting Started The Open Source Electronics Prototyping Platform 3rd Edition Book

  • Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source....
  • Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback.
  • Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart.
  • Includes a total of over 200 electronic parts and components.
Check Stock

Aideepen 5PCS DFPlayer Mini Mp3 Player Board Module Voice Decode Board Support TF Micro SD Card U Disk Audio Music

  • 【Upgrade】This is a MP3 Player Audio Voice Module, can be connected directly to the speaker.GD3200B chip replacement old YX5200 (Compatibility....
  • Supported Sampling Rates (kHz):8/11.025/12/16/22.05/24/32/44.1/48.
  • 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB..
  • The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF....
  • This Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any....
  • A variety of control modes, I/O control mode, serial mode, AD button control mode.-->If you need any questions, please feel free to contact us..
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

RADEX RD1503+ w/o dosimeter High accuracy Geiger counter radiation detector English

  • Kit includes all components needed to build a working Geiger counter, including a high quality printed circuit board, sensitive Geiger-Muller tube,....
  • Included SBM-20 Geiger tube is sensitive to beta and gamma radiation. LED and piezo speaker alert you to detected radioactivity..
  • 100% Open Source Hardware (OSHW). Full schematics, PCB layout, and source code available online..
  • Expansion headers allow you to connect your kit to other devices, such as Arduino and Raspberry Pi. Supports data logging. Can be connected to a....
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.

  • Power: Rated Power / Maximum Power 3.0W / 3.5W..
  • Size: 70 mm * 31 mm * 16 mm / 3.1 inch * 1.2 inch * 0.63 inch (L* W * T)..
  • Compatible With Arduino, Robot, Raspberry Pi, Advertising Machine, Game Machine, Integrated Machine Special Speaker etc, Projects..
Check Stock

CQRobot Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard JST-PH2.0 Interface It is Ideal for a Variety of Small Electronic Projects.

  • Power: Rated Power / Maximum Power 3.0W / 3.5W..
  • Size: 70 mm * 31 mm * 16 mm / 3.1 inch * 1.2 inch * 0.63 inch (L* W * T)..
  • Compatible With Arduino, Robot, Raspberry Pi, Advertising Machine, Game Machine, Integrated Machine Special Speaker etc, Projects..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Keywish Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P with 30 Lessons Tutorial Compatible with Arduino IDE Mixly Mblock Graphical Programming

  • ✔ High-quality kit: Contains 48 electronic components Kits for Arduino,which fully meet the components required by beginners.All of the Components, breadboard and Integrated Circuits are individually packaged and labeled, and packing in a plastic box.Instruction Link：https://github.com/keywish/keywish-uno-starter-kit.
  • ✔ Graphics programming: Support scratch 3.5, MagicBlock based on Arduino platform, easy to learn and improve writing efficiency..
  • ✔ Strong compatibility: 100% compatible with Arduino UNO R3, NANO,for Arduino IDE, Mixly and Mblock..
  • ✔ Free video tutorial: Comes with tutorial. Free 30 Lessons PDF tutorial from Official website download or you can contact our customer service..
  • ✔ Different gifts: Exquisitely packaged. This is the perfect starter kit for arduino,which as a gift for students, children and friends in the school season, Christmas, New Year, birthday, parties, performances, special occasions, etc..
Check Stock

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock