Categories

Best Artillery 3d Printer

Artillery Sidewinder X2 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Filament Resume Printing After Power Failure, Build Size 11.81x11.81x15.75in

  • ... flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the filament has reached the end, which largely improves its automatic working ability and convenience..
  • 【32-bit Mainboard with Silent Printing & Easy to Install】- Thanks to the exclusive 32-bit mainboard and ultra-quiet stepper driver, there is almost no unpleasant noise when printing. Moreover, this upgraded Genius Pro 3D printer is already 98% pre-assembled and only requires a couple of screws installed to hold the main rail assembly to the base. Only several minutes needed can you finish installation..
  • 【Perfect Birthday and Christmas Gifts For Him】- Do you still not know what gifts given to y....
Check Stock

Artillery Genius Pro 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Auto Leveling, Desktop DIY Tool, Xmas Gifts for Him, Build Size 8.7x8.7x9.8inch

  • ... flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the filament has reached the end, which largely improves its automatic working ability and convenience..
  • 【32-bit Mainboard with Silent Printing & Easy to Install】- Thanks to the exclusive 32-bit mainboard and ultra-quiet stepper driver, there is almost no unpleasant noise when printing. Moreover, this upgraded Genius Pro 3D printer is already 98% pre-assembled and only requires a couple of screws installed to hold the main rail assembly to the base. Only several minutes needed can you finish installation..
  • 【Perfect Birthday and Christmas Gifts For Him】- Do you still not know what gifts given to y....
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

  • 3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
  • 3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
  • Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
  • Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
  • 3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Blue

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Red

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm

  • [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality..
  • [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes..
  • [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery..
  • [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affect your sleep..
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black, MP05775

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot MP05792 PLA Filament, 1.75 mm Diameter, Small Spool, Natural

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock