Categories

Best Ask Receive Module

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock

Nordic BLE 4.0 nRF51822 Controller Chip Bluetooth Module Small Size 18.5 x 9.1x 2.0mm 5 Pack

  • YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
  • It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
  • The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
  • Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..
Check Stock

Magic Eight Ball: Fortune Telling Magic 8 Black Ball Original Retro (10 cm)

  • Ask the ball any of your wildest questions and receive your fate.
  • Ask the ball, shake the ball, then flip upside down to receive your answer.
  • With 20 possible answers, the ball is great for straightforward advice!.
  • Product dimensions: 3.94 x 3.94 x 3.94 inches.
Check Stock

Taidacent 20mm to 80mm Long Distance 12V to 24V Input 5V 2A Output Wireless Power Supply Module Wireless Charging Coil Module Wireless Inductive Coil

  • The transmission voltage is designed with a wide voltage: 12V~24V..
  • Receiver coil size: outer diameter 88mm..
  • Sensing distance: Receive output 5V2A at 20mm.
  • Note: The distance between the two coils need greater than 13mm!.
Check Stock

Firstech Compustar Drone Mobile X1MAX-LTE Telematics GPS Alarm Module Tilt Drone X1-MAX

  • ...ted Range - Control & track your car from anywhere over LTE with 3G fallback. Built-in Backup Battery - On-board lithium-ion battery that triggers alert when main battery is cut off. On-Board Security Sensors - Built-in security sensors that detect shock, tilt, glass-break, and towing. Push Notifications - Receive alerts via smartphone.".
  • Security Monitoring - DroneMobile sends you a security alert if intrusion or hit-and-run occurs Works with Your Vehicle - Compatible with over 90% of vehicles on the road GPS Tracking - Locate your vehicle using DroneMobile Maps Curfew Alerts - Monitor after-hours driving. History Log - Review past activity/alerts Maintenance Reminders - Set mileage-based and date-based service reminders. Points of Interest - Receive alerts when exiting/entering an area.
Check Stock

Solu JY-MCU HC-06 Slave Bluetooth Serial Port Transeiver Baseboard Mini module// Arduino Wireless Bluetooth Transceiver Module Slave 4Pin Serial

  • About us (Solu ), Professional factory of circuit boards, welcome to our store for more choices with best price. What we pursue is your satisfication of our service, not just for our goods.For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. we will reply you about any question you ask within 24 hours.
  • Core module HC-06, leads to interface includes VCC, GND, TXD, RXD, aside LED status output pin,.
  • Adapted to many USB Bluetooth Such as HC05 HC06, HC07, BC04 or other compatible Bluetooth module pin definition.Power reverse connect protection.
  • the input voltage 3.6 ~ 6V, unpaired when the current approximately 30mA, paired about 10mA, the input voltage must not exceed 7V.
Check Stock

Optical Fingerprint Reader Sensor Module Door Lock Access Control Red Light for Arduino Mega2560 UNO R3 Geekstory

  • Optical fingerprint sensor secure your project with biometrics. This fingerprint module can be used for fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search, it's easy to use, so its perfect for any project.
  • Fingerprint sensor module can work with any microcontroller which with serial port: such as compatible with arduino, 51, avr, stm32, pic, arm, msp430.
  • Package Includes:1 X Optical Fingerprint Reader Sensor, 2 X Cable. You can enroll new fingers directly - up to 240 finger prints can be stored.
  • Applications: Fingerprint door locks, safes, guns, financial and other security areas.
  • Access control systems, industrial computers, POS machines, driving training, attendance and other areas of identity.
  • fingerprint payment and other financial areas.
  • The fingerprint moudle documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
Check Stock

DJI Part 14 Command Unit for Ronin-S Gimbal

  • The Ronin S/SC pan/tilt control module is equipped with a display screen and five-dimensional buttons. It integrates pan/tilt setting functions such as motor, working mode and control settings, and can directly use the creative functions. It is easy to set the Ronin S without a mobile device. /SC Parameters and control PTZ shooting..
  • Use the screws on the body of the pan/tilt control module to install only the Ronin-S ports on either side. After installation, turn on the Ronin-S power and the gimbal control module can work..
  • Colossal photography: Set the relevant parameters according to the camera type and select Quick Start, then set the start point and end point of the shooting, and the camera will start shooting after startup. The screen displays the number of shots and the completion progress..
  • Time-lapse photography: Set the relevant parameters according to the camera type and select quick start, and then set the start and end points of the shooting. If the shooting point is delayed, the start and end positions are the same.
  • if the shooting trajectory is delayed, the start and end positions are different. The camera will start shooting after booting up..
  • You will receive: Ronin S/SC PTZ control module*1.
Check Stock

Stemedu ESP8266 Test Board Code Burner Flash Downloader ESP8266 ESP-01S Serial WiFi Wireless Transceiver Module for Fixture Board (Pack of 5pcs)

  • Video tutorial: https://youtu(dot)be/oLtgUKrG6wM, ESP8266 Flash Downloader with ESP-01S Serial Module https://youtu(dot)be/gmluzujXw78.
  • All IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning.
  • Compatible with ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ▶ Micro USB interface, this module is very easy to program..
  • The board supports one-click firmware download function, and add burning.
  • If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us.
Check Stock

Takis Lollipops | Takis Party Size 12 Count | Paleta Takis | Takis Fuego | Bulk of Paletas Takis | Takis Paleta | Takis Fuego Lollipop | Taki Lollipop | Powder Lollipops

  • 13 Individually Wrapped Taki Fuego Mexican Candy Takis Suckers Lollipops With Chili Powder, Get Your Strip Now..
  • Try this New Taki Lolipops Takis Paleta by Itself or Dip It in the Takis Fuego Powder | Taki Powder Lollipops.
  • The only ones with the Authentic Flavor of Made in Mexico Paletas Takis.
  • Takis Variety Pack Wild West Store Bundle INCLUDES A SPECIAL EDITION MUSLIN LOLLIPOP KEEPER. IIF YOU DON'T RECEIVE IT, ASK FOR A REFUND!!!!.
  • Wild West Store Sells the Authentic Made in Mexico Takis Lollipop if you don't receive it Ask for Refund.
Check Stock

HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

  • This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology..
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient..
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor..
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works..
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers..
Check Stock

BASIKER 2-Pack Antenna Mast for Harley Davidson Tour Street Road Glide 1989-2021 (5-1/2 Inch Rocket Type)

  • Fitments: Fit For 1989 to 2021 Harley Davidson Glide Electra Road Street Tour Ultra Trike EVO Motorcycle.
  • Useage: This Harley antenna is used to receive car radio signals, supports AM FM CB frequency, and does not affect the use of motorcycle’s GPS and other devices..
  • Material: We used the most durable Thai rubber to make the outside of motorcycle the antenna.The material used to receive the signal inside is made of high-quality copper from Chile.On the basis of high quality signal reception, the radio antenna can be used for a long time..
  • Design: Exclusive design, with patents.The inspiration comes from the mighty rocket..
  • After-sales: If you have a problem, click “BASIKER” under the” buy now “button and then click” Ask a question “to Ask for help.We use amazon’s warehouse, so it is very convenient to return and exchange goods. Please rest assured..
Check Stock