Harrington LB Lever Hoist, Hook Mount, 3/4 Ton Capacity, 10' Lift, 11\ Headroom, 9.6\ Lever Length, 0.9\ Hook Opening
- Compact manual lever hoist and hook mount with all-steel construction for strength.
- low headroom for work in small spaces and at any angle.
- Spring-loaded freewheel facilitates rapid adjustment of load chain with one hand, and helps prevent accidental freewheeling when a load is on the chain.
- Mechanical brake with two moisture-resistant brake pads, four braking surfaces, and two brake pawls to help ensure reliability.
- Factory load tested to 125% of rated capacity in accordance with ANSI/ASME requirements.
- Complies with ANSI/ASME B30.21 and ANSI/ASME HST-3M standards.
Check StockHarrington CX003 Mini Hand Chain Hoist, Hook Mount, 1/4 Ton Capacity, 10' Lift, 8.5\ Headroom, 0.8\ Hook Opening
- Compact manually operated chain hoist and hook mount with aluminum body, steel frame, and low headroom for strength, work in small spaces, and to fit into mobile storage carriers.
- Low pulling force requirement to facilitate use.
- Load limiter helps prevent lift operation when load exceeds rated capacity for added safety and to avoid damage.
- Grade 100 nickel-plated load chain for resistance to corrosion and wear.
- stainless steel hand chain for resistance to wear.
- Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
- built to comply with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.
Check StockHarrington CF Hand Chain Hoist, Hook Mount, 1/2 Ton Capacity, 10' Lift, 12.8\ Headroom, 1.1\ Hook Opening
- Manually operated chain hoist and hook mount with die-cast aluminum body, heat-treated pinion shaft and load gear, pre-lubricated sealed ball bearings, and precision machined gears for strength, simplified maintenance, and smooth lifting.
- Load chain made of heat-treated manganese alloy to resist abrasion and minimize chain weight.
- mount hook and load hook made of forged, heat-treated alloy steel to resist fracture under stress.
- Load brake with two moisture-resistant brake pads and four braking surfaces to help ensure smooth lifting.
- Factory load tested to 125% of rated capacity in accordance with ANSI/ASME B30.16 requirements.
- Complies with ANSI/ASME B30.16 and ANSI/ASME HST-2M standards.
Check StockCrescent 10 Pc. 3/8\ Drive Flare Nut Metric Wrench Set - CCFWS1N
- Manufactured from Crestoloy alloy steel for better strength and longer tool life.
- Meets or exceeds ANSI and ASME specifications.
- Off-corner loading design reduces fastener rounding.
- Nickel Chrome Plated for Long Lasting Finish.
Check StockTempilstik 28043 Surface Temperature Indicator, 500 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.7.
Check StockTempilstik 28012 Surface Temperature Indicator, 200 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.4.
Check StockTempilstik 28006 Surface Temperature Indicator, 150 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.3.
Check StockTempilstik 28051 Surface Temperature Indicator, 800 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.9.
Check StockTempilstik 25067 Surface Temperature Indicator, 1550 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.11.
Check StockTempilstik 28310 Surface Temperature Indicator, 212 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.12.
Check StockTempilstik 28318 Surface Temperature Indicator, 302 degrees F (One Indicator)
- Accurate results are +/- 1 percent of rated temperature.
- Easy to Use melts at designated temperature for easy visual inspection.
- Superior quality free of contaminants such as Sulfur, Lead and halogens.
- Traceable each marked by temperature, lot Number and is NIST traceable.
- Complain Meets aws D1.1, ASME Code sec. I, III and viii, ANSI/ASME Code B31.1 and B31.14.
Check StockThe Hillman Group 230360 Hanger Bolt, 3/8-Inch X 4-Inch, 50-Pack
- Double ended screw with machine screw threads on one end and wood screw threads on the other end.
- Commonly used to secure swag hooks into walls or ceilings.
- Nuts and washers not included, ensure washers and nuts are same diameter.
- Specification(s) Met: ASME B1.1 and ASME B18.2.1.
Check StockThe Hillman Group 43427 5/16-18-Inch x 5-1/2 Hanger Bolt, 10-Pack , Zinc
- Double ended screw with machine screw threads on one end and wood screw threads on the other end.
- Commonly used to secure swag hooks into walls or ceilings.
- Nuts and washers not included, ensure washers and nuts are same diameter.
- Specification(s) Met: ASME B1.1 and ASME B18.2.1.
Check Stock