Categories

Best Astm Aluminum Roofing Sheet

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Ace Screws 3 Roofing Insulation Plates SKINNYnSTRONG - 1,000pc ,Goes with Self Tapping Fasteners into Metal and Wood Roof Decks Corrugated Roofing Commercial Insulation EPDM TPO PVC

  • ASTM Tested and ISO 9001:2015 Standard. All of ACE Screws are tested by Element Materials Technology and SGS laboratories for quality assurance.
  • Ace Screws SKINNYnSTRONG 3" Insulation Plates are designed to be used with Ace Screws FATnSTRONG Roofing Fasteners to secure insulation as required by....
  • SGS Pull Out Test Results 18ga, 20ga, 22ga Steel Decking: 500.94 lbf.
  • Material: AZ150 (AZ50 Galvalume) aluminum-zinc coated steel.
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

Blue Demon E71TGS .030 X 2# Spool Gasless Flux Core Welding Wire

  • joining of galvanized roofing sheet metal.
  • typical applications to include lap and butt welds on galvanized sheet metal.
Check Stock

STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers

  • SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
  • EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
  • WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
  • MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
  • BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.
Check Stock

HEATIT Roof De-Icing Cable Clips 50-Pack

  • Included 50 aluminum roof clips for approximately 35 linear feet of roof edge.
  • You can use roofing adhesive or roofing nails to install the clips. The holes in each clip can make the clip more stable on the roof. Please buy the....
  • Commercial grade clips, made of non-corrosive aluminum, secure all major brand heat cables to roofs. Can be used on various roofs such as metal,....
  • Provide constant reliable holding power for heat cable on roofs.
  • Two year limited product quality warranty.If you are not completely satisfied with HEATIT products, please feel free to contact us in any time, we'll....
Check Stock

00 Superflex TPO RV Rubber Roof | Camper Rubber Roof | Trailer Roof | Motorhome Roof | Camper Roof | RV (Camper) Roof Repair | Trailer Roof Repair (9.5FT Width, 10FT Length)

  • WILL NOT CHALK, FADE OR STREAK - Superflex RV roofing is a redesigned coverage system that has been engineered not to chalk, fade, or leave streaks like other competitive products in the RV aftermarket industry..
  • FLEXIBLE - SUPERFLEX Roofing Membrane is very stretchable and conforms to the multiple contours of todays RVs in a clean, chalk-free, non-fade membrane..
  • WITH RESISTANT PROPERTIES - This RV roofing has resistant properties, which means keeping maintenance down to a bare minimum..
  • WEATHER PROOF – Weather proof, providing excellent protection against the elements, including rain and wind..
  • INDUSTRY STANDARD ROOFING - Considered to be the industry standard material for all RV purposes. It beats both fiberglass and aluminum when it comes to weight, cost and ease to repair..
Check Stock

80 Pieces 3/16' x 1' Large Flange Aluminum Rivets for Metal, Blind Fasteners (Silver)

  • Large Flange Rivets: Add this pack of rivets to your tool kit for advanced preparation.
  • use them to hang signs, nameplates and more.
  • use them while metal and woodworking for a sturdier hold.
  • Convenient: Use the pop rivets in place of screws or nails when attaching hinges.
  • they are perfect for hanging items when one side of the wall is inaccessible.
  • High Quality: The 3/16 rivets are made of a sturdy, long-lasting aluminum and iron material.
  • the mandrel is made of iron and won’t break off prematurely.
  • Pop Rivets 3/16: The rivets measure 3/16" x 1".
  • when installed correctly the rivets will not damage any surfaces due to corrosion.
  • What's Included: The pack includes 80 rivets for metal, roofing, walls, and woodwork.
Check Stock

FT Synthetics Platinum HT Butyl Self Adhering Underlayment Pallet of 36

  • 100% butyl provides bond to plywood or OSB roof decks.
  • Compatible with low slope roofing materials such as EPDM and TPO.
  • Nail sealable (meets and exceeds ASTM D1970).
  • Coverage Per Roll: 200 square feet (2 squares) Roll Width: 36 in. Roll Length: 67 ft. Roll Weight: 40 lbs. Roll Thickness: 41 mils.
Check Stock

Copper Flashing 99.95% Pure - 16 Oz 24 Gauge 0.5mm Thickness - 10 Feet Length Copper Roll in Various Widths – Contractors & DIY Projects (8\ Width)

  • 【What You Will Get】: Includes 1 pair of cut-proof gloves and 10 copper nails. Each roll is well wrapped and packed within a sturdy box..
  • 【Premium Materials】: This copper flashing roll is 99.95% pure and meets RoHS testing standards. It is great to add copper accents and upgrade the quality of your woodworking projects!.
  • 【Bendable & Durable】: Copper sheet roll is easy to drill through and cut with tin snips. You can cut it into any size you want and make it perfect for flashing just about any roof!.
  • 【Amazing Look & Weather proof】: It is perfect for any outdoor purpose & waterproofing. By using our roofing flashing roll to make your home and craft looks beautiful and shiny..
  • 【Widely Use】: The copper sheet metal flashing is perfect for metal roofing, home shed, shingle flashing, chimney flashing, gutters & drainage system, home decoration, window corner flashing, building corner flashing, concrete barriers, pressure treated lumber, etc. It is also great for craft shop, blacksmith, coppersmith and hobbies. There are more DIY projects for you to discover..
Check Stock