uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit
- Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
- Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
- Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
- 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
- Tips: Recommended feed rate: general steel: 6-15m/min.
- cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock
uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit
- Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
- Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
- Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
- 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
- Tips: Recommended feed rate: general steel: 6-15m/min.
- cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check StockIWISS PEX Copper Pipe Ring Crimping Tool Kit for 3/8 in 1/2 in 3/4 in 1 inch Pex Crimp Rings Meets F1807 Standard
- Multi-Head PEX Crimp Tool Kit: IWS-FAS copper ring crimp tool kit includes 3 exchangeable die sets(1/2'', 3/8'', 3/4'') and built-in 1'' jaw, Go/No-Go....
- Purpose: IWS-FAS F1807 PEX crimp tool kit is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
- Capacity: Works with 4 major sizes of PEX tubing - 1/2", 3/8", 3/4" and 1". Factory calibrated and meets ASTM F-1807 standard.
- Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
- Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check StockWeston Signs Reflective American Flag Motorcycle Gas Tank Flame Decals
- Each Decal is 2" h x 8" w in size - REFLECTIVE.
- Comes as a set (1 right side and 1 left side).
- High Resolution Full Color Vinyl Graphics.
- Die cut right to the edge with no white or clear showing..
- Reflective Engineer Grade Vinyl that meets the ASTM 4956-99 Specifications.
Check StockStanley Hardware S830-810 CD8824 Laminated Steel Padlock
- Laminated Steel Body, Hardened Steel End Caps And Recessed Rivets, Protects Lock From Attacks.
- Hardened Steel Shackle Resists Sawing And Cutting Attacks.
- Laminated steel body with hardened steel end caps and recessed rivets to protect lock from attacks.
- Patented keyway cover protects against drilling.
- Dual stainless steel ball-bearings resist pry attacks.
- Commercial 6 pin cylinder with anti pick pins.
Check StockSkechers for Work Women's Bisco Work Shoe, Black/Gray, 7 M US
- Steel toe rated ASTM F2412-2011 I/75 C/75 protection.
- Electrical Hazard safe design tested ASTM F2412-2019.
- Padded collar and tongue, Slip Resistant rubber outsole.
- Sole tested ASTM F1677-05 Mark II to meet or exceed a .5 coefficient even on wet and oily surfaces.
Check StockLOUDERLUN Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft
- Includes 9 steel dies and 1 polyurethane lower wheel.
- Hem edges, create offsets and flanges, form style lines, contours and channels.
- Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Check StockYiJiLi Diestock Holder Metal Round Die Stock Holder Thread Tap Wrench Handle Bar Tools Woodworking DIY(M18-M22), 45mm
- 【Dimension】-Diameter: 45mm/1.77 inches.
- 【Material】- Steel & Alloy Steel, with superior toughness, great wear resistant, rust-proof, durable for lasting a long service life.
- Used to make new threads when the threads are seriously damaged.
- 【Easy to Use】- This die handle is easy to use for occasional hole project. It fits the die perfectly and easy to use.
- 【Features】- Round die holder is featured with 5 adjustable screws to fix the dies.
- The die stock can securely hold round dies and is easy to operate.
- 【Wide Usage】- This tap and die comes with a removable handle for work in tight spaces. Suitable for cleaning mild steel or aluminum, house decoration, construction, car repairing, factory work.
Check Stock
BioBag Dog / Pet Waste Bags on a Roll 45 Bags Each Box (Case of 12) Total 540 Bags
- Why use BioBags Dog Waste Bags instead of grocery bags or other plastic poop bags? Regular polyethylene-based plastic bags (like grocery bags or regular poop bags) can take over 100 years to degrade. Less than 2% of all plastic bags get recycled and plastic does not completely recycle. Plastic bags litter our streets, backwoods and waterways. Thousands of animals die from eating or getting caught up in plastic debris..
- BioBags are superior to other bags. Some manufacturers are blending additives to polyethylene to produce "degradable" bags. Unfortunately, this process fragments the bags into pieces of plastic debris that do not meet the ASTM D6400 standard. These pieces cause serious harm when mistaken by animals and birds for food. BioBag products use no polyethylene in the production process. BioBags are also GMO-free!.
- BioBags pack down small and have a silky texture..
- Compostable - BioBags are BPI certified to meet the ASTM D6400 specification. BPI Certification #891053.
Check StockStanley Hardware S828-178 CD8821 Combination Security Padlock
- Hardened Molybdenum Alloy Steel Shackle Resists Sawing And Cutting Attacks.
- Dual Hardened Steel Locking Bolt System Resists Pry Attacks.
- No keys required, you set your combination.
- Hardened molybdenum alloy steel shackle resists sawing and cutting attacks.
- Dual hardened steel locking bolt system resists pry attacks.
- Snap fit cover seals lock from the elements.
Check StockTimberland PRO Men's Keele Ridge Steel Safety Toe Waterproof Industrial Hiking Work Boot, Brown, 11
- Steel Safety Toe: Metallic, asymmetrical-shaped toe cap.
- Meets US and Canadian safety standards including ASTM F2412-18a and ASTM F2413-18 I and C impact and compression safety standards and CAN/CSA-Z195-14 Grade 1..
- Waterproof Membrane: Delivers maximum waterproof protection and blood-borne pathogen resistance.
- Blood-borne Pathogen Resistant: Breathable membrane helps protect from diseases caused by blood-borne pathogens.
- Rubber Outsole: Heat-resistant, durable rubber compound offers enhanced slip, oil and abrasion resistance..
- Electrical Hazard Protection: Provides secondary underfoot protection against live electrical circuits, electrically energized conductors, parts or apparatus.
- Meets ASTM F2412-18a, ASTM F2413-18, ASTM F2892-18 and CAN/CSA-Z195-14 standards..
Check StockMuzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit
- ...the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
- Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
- Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check StockStanley Hardware S828-244 CD8824 Laminated Steel Padlock in Silver, 60mm Width
- Laminated Steel Body, Hardened Steel End Caps And Recessed Rivets, Protects Lock From Attacks.
- Hardened Steel Shackle Resists Sawing And Cutting Attacks.
- Laminated steel body with hardened steel end caps and recessed rivets to protect lock from attacks.
- Patented keyway cover protects against drilling.
- Dual stainless steel ball-bearings resist pry attacks.
- Commercial 6 pin cylinder with anti pick pins.
Check Stock
