Categories

Best Astm Galvanized Roofing Sheet

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Malco Portable Mini Brake, 48 In, 22 Ga Capacity

  • Bends up to 135 degrees in 22 gauge galvanized sheet metal.
  • Bends metal roofing components and roof flashing including copper and aluminum.
  • Ideal for fabricating plenums or large transitions at the job site.
  • Makes compact fabrications as small as a 4-inch square.
  • Accommodates sheet metal up to 4 feet wide.
Check Stock

STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers

  • SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
  • EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
  • WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
  • MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
  • BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.
Check Stock

#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing

  • Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
  • Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
  • Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

National Nail 135055 250CT 1-Inch Plastic Cap Nail

  • Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
  • All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
  • Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..
Check Stock

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

  • TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
  • APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 100

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

1\ Smooth Shank Solid Copper Roofing Nails 10 Gauge USA Made - Qty 50

  • Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
  • They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
  • Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..
Check Stock

meite 15 Degree Round Head 1-1/2-Inch × .120 Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails 2,880 PCS/Pack

  • 15 degree 1-1/2-Inch × .120 coil roofing nails.
  • For used in Bostitch RN46-1, Senco 455XP and other 15 degree coil roofing nailers.
Check Stock