Categories

Best Astm Shaft Part

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock

Traxxas 1/10 Slash 2WD TITAN 12T BRUSHED 550 MOTOR & 19T PINION GEAR

  • Titan 12 T 550 Motor (Part # 3785) Includes Two (2) Capacitors and Two (2) Leads with Connectors Specifications Can Diameter: 1.25" (38mm) Shaft Diameter: 0.12" (3mm) Length Including: Shaft 3.2" (81mm) Length Not Including Shaft: 2.3" (57.5mm) Input Battery Voltage: Up to 8.4v Pinion Gear 19T (48 Pitch) with Set Screw (Part # 2419)Buyer agrees to contact manufacturer for all warranty replacements. No term warranty provided by Dollar Hobbyz. No liability shall b.
  • Includes: Titan 550 12T Motor (Part # 3785) 48P 19T Pinion Gear w/Set Screw - Steel (Part # 2419) - This product is NEW in OEM Retail Packaging..
  • Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents..
  • Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only..
  • Part number(s) included (in factory packaging): 3785 2419.
Check Stock

Hakatop New Replacement 78418 Temperature Fuel Control Red Knob For Mr. Heater MH18B BIG Buddy Portable Propane Heaters With 27mm Base OD

  • Temperature Fuel Control Knob (27mm shaft) for MH18B Mr. Heater BIG Buddy Portable Propane Heaters, Part #78418.
  • Part #78418. This knob has a 27mm OD shaft size. Please measure outside diameter of knob shaft for proper fit..
  • This knob will ONLY fit BIG Buddy heaters with the serial number MHC748000097072 and HIGHER and all CURRENT models..
  • For use on Mr. Heater, Heat Star, and Enerco MH18B BIG Buddy Portable Propane Heaters..
  • (*Use Part #78018 knob for heaters with the serial number MHC748000097071 and LOWER, where the knob has a 12.5mm shaft base*.).
Check Stock

Thorogood American Heritage 11" Square Toe Wellington Leather Work Boots for Men with Steel Safety Toe and Slip-Resistant Outsole, Size 9

  • DURABLE COMFORT - Made with full-grain leather with Trail Crazyhorse upper, Pebble Brown bottom, 3-tone decorative shaft stitching, and pull loops to make it easier to pull your boots on..
  • SAFETY TOE & SHOCK ABSORPTION - Steel safety toe protects from high impact and compression. Removable Ultimate Shock Absorption footbed provides ultra-comfort..
  • SLIP-RESISITING - Footwear is tested for ASTM F3445-21 industry criteria for slip-resisting footwear. Wyatt90 oil-resisting outsole is designed to withstand or reduce damage due to oil..
  • EH RESISTANCE - these Square Toe Wellington work boots meet ASTM F2413-18 or ASTM F2892-18 electrical hazard resistance safety standards.
  • AMERICAN MADE - Made in the USA with USA and globally sourced components.
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

Apeixoto Intermediate Steering Shaft Steering Columns Compatible with Chevy GMC Cadillac Hummer with OE Replace # 19329330, 88965505, 89060582, 19149105, 19153614

  • Fitments: This steering shaft is compatible with Cadillac Escalade ESV EXT.
  • GMC Yukon. Please make sure this is the correct for your vehicle before your purchase..
  • Replace OE #: The Apeixoto lower steering shaft is designed and manufactured with OE standard. The direct OE replace part numbers are 19329330.
  • Function: The Apeixoto steering shaft is a key part to connect steering shaft and the steering gear on your vehicle. A good and well made steering shaft will make the steering operation much more smoothly and give you a more convenient driving experience..
  • High Quality: The Apeixoto steering shaft is constructed with high quality material which gains a much longer lifespan..
  • Warranty: We offer 30 days free return and 365 days free replacement. If you need any assists, feel free to ask..
Check Stock

ST2000Z 1967-95 forGM Cars Upper Steering Column Snap Ring

  • 【High Quality】The Lower Steering Shaft is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is made of high quality material and maintain a good strength to give the parts long time performance..
  • 【Universal Joint 】Direct replace your worn or damaged steering shaft, with new U-Joints featuring precision needle bearings for smooth, silent operation and reliable performance..
  • 【Compatibility】This Steering Shaft fits for 004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 Toyota Tacoma 4WD and PreRunner 2WD in Lower Steering Column..
  • 【Replace OE Part】# 4520304021, 45203-04021. This Steering Column Intermediate Shaft will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • 【Warranty】100% satisfaction guarantee, 1 year UNLIMITED REPLACEMENT PROMISE, If you have any issues with the RLower Intermediate Steering Shaft Assembly, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Hireko Graphite Shaft Extender

  • Shaft extenders fit into the butt of the existing shaft and underneath the grip to extend club length.
  • This graphite shaft extenders fits many heavier or thicker walled graphite shafts..
  • The stem portion (or the part that goes inside the shaft) measures 0.485". If the stem is too large, it can be sanded as much as 0.020". Make sure to measure the inside diameter of the shaft first to make sure it will fit..
  • The upper portion that goes above the butt of the shaft measures 0.600"..
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

FOREDOM SHEATH Part S-77 FLEX SHAFT MOTORS STANDARD OUTER SHEATH 36-1/4\ LONG (E 8)

  • FOREDOM SHEATH S-77 OUTER FLEX SHAFT MOTORS SHEATH 36-1/4" LONG.
  • FOREDOM 77 Original 36-1/4" LONG OUTER SHEATH REPLACEMENT PART- tandard models. This outer Sheath is for use with S-93 key tip inner shafts sold separately. NOTE: last picture show Shaft and Grease which can be purchased at our store. A Foredom flexible shaft motor Maintenance-Replacement Part. FOREDOM Item Number: S-77.
Check Stock

UniTry 2Pcs Microwave Turntable Coupler, Microwave Oven Roller Guide Support (Shaft Length: 0.94"/ 24mm)

  • ✅ Reminder: There are two different sizes of the shaft length (17mm, 24mm). In order to buy the correct coupler, you need to measure the shaft length of your old coupler. If you select a wrong size, the turntable plate may be unable to turn or not in balance on the support..
  • ✅ Shaft Dimensions: Length 0.94″/ 24mm, Outer Diameter 0.43″/ 11mm..
  • ✅ Material: Made of high quality plastic for long life usage, an ideal replacement for the old or broken one..
  • ✅ Compatibilty: Universal replacement part for microwaves (the old part should have the same size).
  • ✅ Package Contents: 2 x Microwave Turntable Coupler (Shaft Length: 0.94″/ 24mm).
Check Stock

SNOWEX Salt Spreader Motor Gearbox 8:1 575 1075 D6106 D6107

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed).
  • Specs: Salt Spreader Motor, Voltage: 12, Rotation: Reversible, OD: 4.606in / 117mm, Shaft OD: 0.748in / 19mm, Length: 10.669in / 271mm, Terminal 1 Size: Wire, Terminal 2 Size: Wire, Shaft: 8mm Hole, Current Type: DC, Weight: 17.53 lbs / 7.97 kg.
  • Replaces OEM Part Numbers: Buyers: 3016309.
  • Please verify this is the right part number before ordering.
Check Stock

AlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts

  • The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock