Categories

Best Astm Stainless Seamless Pipe

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....
Check Stock

NIREU 6 Inch Square Shower Floor Drain with Removable Cover Grid Grate, SUS 304 Stainless Steel, Watermark&CUPC Certified, Chrome Finished

  • 6 inch length, 6 inch width square drain fits perfectly most square tiles. 2 inch bottom outlet, 60L/min high flow capability, fits US NO HUB Drain Base System, solving bathroom drainage problem effectively..
  • The square drain made of US ASTM standard 304 Stainless Steel, base flange made of ABS construction, surface Chrome finished, protect against corrosion, scratches and rust for long-lasting durability. WATERMARK&cUPC certified..
  • The removable cover grid grate with 64 square holes design, it can prevent hair and larger objects from falling into the sewer and enhance water flowing. The embedded design offer a invisible and seamless look on your floor..
  • Easy to install with clear instructions. Base flange connects to drain pipe, fit standard U.S. plumbing connection. It can be used in bathroom, kitchen, pool, lavaroty, garage, basement, toilet etc..
  • The square drain kit includes removable hair strainer/trap and lifting hook/key, you can easily lift the cover for cleaning..
Check Stock

IWISS ® Rachet PEX Pipe Cinch Tools for Stainless Steel Clamps meet ASTM 2098 clamping 3/8 1/2 3/4 5/8,1-inch Pipe Tubing

  • Used to clamp stainless steel clamps during Pex pipe connection.
  • Used with all (5) sizes of PEX Stainless Steel Cinch Clamps: 3/8, 1/2, 3/4, 5/8 and 1-inch.
  • Ratchet design releases when the Cinch Clamp tab is properly pinched.
  • One-hand ratchet design allows to operate the tool with one hand only,Helps connect PEX pipe in close areas with minimal space.
Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)

  • This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
  • Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
  • It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
  • This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
  • Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

WEBANG 6 Inch Square Shower Floor Drain with Flange,Quadrato Pattern Grate Removable,Food-Grade SUS 304 Stainless Steel,Watermark&CUPC Certified, Brushed Gold Brass

  • 【Size】- 6" length, 6" width, 2" central outlet. 20-25 L/min high flow capability, solving ponding problem for bathroom, pool effectively. Heavy duty steel cover offer a good sealing ability. Base flange connects to drain pipe, fit standard U.S. plumbing connection and certified by CUPC..
  • 【Material】- This square drain shower made of US ASTM standard 304 stainless steel, base flange made of PVC construction. Drain surface brushed finished, protect against corrosion, scratches and rust for long-lasting durability..
  • 【Design】- The square drain cover with grid design to enhance water flowing. Embedded design offer a invisible and seamless look on your floor. Heavy duty steel cover offer a good sealing ability..
  • 【Installation】- Square grate shower drain outlet easy to unload, fits US NO HUB Drain Base System. Can be used in bathroom, kitchen, pool, balconies, garage, basement and toilet etc..
  • 【Accessories】- The drain kit includes shower drain base removable hair strainer / trap and key, and you can lift off the cover easily to clean..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

PEX Pipe Clamp Cinch Tool Crimping Tool Crimper for Stainless Steel Clamps from 3/8-inch to 1-inch with 1/2-inch 10PCS and 3/4-inch 10PCS SS PEX Clamps,with Pipe Cutter

  • UNIVERSAL - Meets ASTM 2098 standard. Compatible to work with all brand stainless steel clamps with sizes 3/8", 1/2", 5/8", 3/4" and 1"..
  • With 1/2-inch 10PCS and 3/4-inch 10PCS SS PEX Clamps.
  • It can be used with any ASTM F2098 stainless steel clamps from any manufacturer.
  • The ratchet safety-function bring fast and reliable installation.
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cap, 1/16\ Tube OD

  • Cap for closing the end of a pipe or fitting.
  • Fitting connects to tubing on its open end.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

5in1 Pex Crimper Kit 3/8 1/2 5/8 3/4 1 Crimping Plumbing Copper Ring Tool

  • 「UNIVERSAL」This tool meets ASTM 2098 standard will work with stainless steel clamps from any manufacturer to make PEX connections from 3/8-inch to....
  • 「INNOVATIVE」New design makes it be a multi-function tool which can cinch clamps and remove the clamps from pipe to allow re-using the pipe....
  • 「DURABLE」The cinch&remove tool is constructed of durable high-quality steel with forging process to ensure integrated mechanical property and long....
  • 「EASY」It’s easy to switch cinch and remove function.And the ratcheting design and self-release mechanism makes the cinch effortless.The tool is....
  • 「ALL-IN-ONE」This is a All-in-one kit for pex pipe installation, it includes 1pc of cinch&remove tool,1pc of Pex cutter,20pcs of 1/2-inch clamps....
Check Stock

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

PEX Cinch Tool Pipe Crimping Tool for 3/8-inch to 1-inch Stainless Steel Clamps with 10PCS 3/8',1/2' 3/4'and 5PCS 1' SS PEX Clamps,with Pipe Cutter

  • UNIVERSAL - Meets ASTM 2098 standard. Compatible to work with all brand stainless steel clamps with sizes 3/8", 1/2", 5/8", 3/4" and 1"..
  • With 10pcs 3/8-inch,10pcs 1/2-inch,10pcs 3/4-inch,5pcs 1-inch SS PEX Clamps.
  • It can be used with any ASTM F2098 stainless steel clamps from any manufacturer.
  • The ratchet safety-function bring fast and reliable installation.
  • This tool is factory adjusted and we offer a calibration tool in case you want to have adjustment after longtime using..
Check Stock