Categories

Best Astm Steel Angle

Barrette Outdoor Living Standard Butterfly Hinge, White

  • Designed for wood gates or vinyl gate applications. Holds gate up to 60-in wide and 35-lbs. Max angle 160 degrees..
  • Kit includes one standard gate strap hinge, 1 back plate, 9 - 1 1/4" stainless steel Phillips self-driving screws, 3 - 1 1/2" stainless steel lag screws, 3 - 60mm hex bolts, 3 - thin hex nuts, 3 - nylon washers, and 3 - acorn nuts..
  • Easy installation on posts with 2 1/2" or larger post dimension and gates with 2" or larger rails.
  • Made out of powder coated aluminum, ASTM B117 Salt-Spray tested and passed.
  • Unmatched protection for unmatched gate hardware, with the warranty coverage to prove it. Covered by our Limited Lifetime Warranty, you can rest assured that your investment is well protected..
Check Stock

Parker Hannifin VS269NTA-4-4 Brass Air Brake-NTA Male Elbow Fitting, 1/4\ Compression Tube x 1/4\ Male Thread

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Angled Stainless Steel Receiving Tube NRT for Body Ear Nose Piercing Needles 00g 0g 2g 4g 6g 8g (6 Gauge)

  • Size Chart Below for the needles that are accepted for each gauge.
  • 1 end - 45 degree angle, 1 end - 90 degree.
Check Stock

Small Soldiers

  • PVC polyblend injection molded construction is seamless and 100% waterproof but flexible for greater comfort.
  • resistant to degradation from agricultural chemicals, fertilizers and animal waste.
  • CT (Comfort Technology) offers a unique scalloped top-line for easy flexing.
  • guide along shaft allows for customized height.
  • reinforced at critical stress points for longer wear.
  • Lightweight FOOT FORM contour cushion insole provides arch and heel support, and is removable, washable and replaceable.
  • Deep angle cleated outsole prevents slips and falls on slippery surfaces.
  • contoured heel cup reduces heel slippage.
  • Recommended use: food processing, custodial, farm, general purpose.
Check Stock

DuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

Servus by Honeywell 18821-12 Comfort Technology 14

  • PVC polyblend injection molded construction is seamless and 100% waterproof but flexible for greater comfort.
  • resistant to degradation from agricultural chemicals, fertilizers and animal waste.
  • CT (Comfort Technology) offers a unique scalloped top-line for easy flexing.
  • guide along shaft allows for customized height.
  • reinforced at critical stress points for longer wear.
  • Lightweight FOOT FORM contour cushion insole provides arch and heel support, and is removable, washable and replaceable.
  • Deep angle cleated outsole prevents slips and falls on slippery surfaces.
  • contoured heel cup reduces heel slippage.
  • Recommended use: food processing, custodial, farm, general purpose.
Check Stock

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

Timberland Value Boot Chukka Waterproof Wheat Nubuck 12 D (M)

  • PVC polyblend injection molded construction is seamless and 100% waterproof but flexible for greater comfort.
  • resistant to degradation from agricultural chemicals, fertilizers and animal waste.
  • CT (Comfort Technology) offers a unique scalloped top-line for easy flexing.
  • guide along shaft allows for customized height.
  • reinforced at critical stress points for longer wear.
  • Lightweight FOOT FORM contour cushion insole provides arch and heel support, and is removable, washable and replaceable.
  • Deep angle cleated outsole prevents slips and falls on slippery surfaces.
  • contoured heel cup reduces heel slippage.
  • Recommended use: food processing, custodial, farm, general purpose.
Check Stock

IWISS PEX 1-inch Crimping Tool, for Copper Pex Crimp Rings and Fittings, with Go/No-Go Gauge,Angled Head,suits All US F1807 Standards

  • Purpose: PEX-1 F1807 PEX Copper Crimp Ring Angle Tool is designed to secure 1 in. copper crimp rings into place within PEX piping systems.
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Zurn, Apollo, etc.).
  • Secure Connection: Connections may be checked for security using the Go/No-Go Gauge (included). Each clamp ring shall be gauged to ensure that it has been crimped properly and for the accuracy of the tool.
  • Compact Design: The angled head allows easier access to connections in tight spaces. There are no loose components, jaws to change, or adjustments to be made to create a connection.
  • Smooth Mechanism: Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

Servus Comfort Technology 14 PVC Steel Toe Men s Work Boots Black - Steel Toe 8

  • PVC polyblend injection molded construction is seamless and 100% waterproof but flexible for greater comfort.
  • CT (Comfort Technology) offers a unique scalloped top-line for easy flexing.
  • guide along shaft allows for customized height.
  • Lightweight FOOT FORM contour cushion insole provides arch and heel support, and is removable, washable and replaceable.
  • Deep angle cleated outsole prevents slips and falls on slippery surfaces.
  • contoured heel cup reduces heel slippage.
  • Recommended use: food processing, custodial, farm, general purpose.
Check Stock

Barrette Outdoor Living Modern Kit 73014301 Black(2 Pack) Heavy-Duty Wrap Hinge, 2 Count

  • Designed for wood gates or vinyl gate applications. Holds gate up to 96-in wide and 150-lbs. Max angle 180 degrees..
  • Kit includes pair of heavy duty gate wrap hinges, 4 decorative nylon hinge covers and 24 1 ½” Phillips Screws.
  • Easy installation with 3-way adjustability & Self-closing or manual operation on posts with 4" or larger post dimension and gates with 2"x3 1/2" or larger upright dimensions.
  • Made out of zinc powder coated steel, ASTM B117 Salt-Spray tested and passed.
Check Stock