Categories

Best Ata3 5 To Ata1 8

4x4 Traditional Wood Pyramid Post Caps (3-Pack) - One-Piece Miterless - Fence & Deck Protection (3, 3-1/2\)

  • 6x6 (5-5/8" x 5-5/8") Plastic Black Fence Post Caps - Quantity: 10 Pack.
  • Made to fit a Nominal 6x6. Please make sure to measure your post. Not all 6x6 post measure the same dimension. DOES NOT FIT A TRUE 6x6 posts ~ See Images.
  • Cap presses over the outside of a Nominal 6x6 (5-5/8" x 5-5/8") Post, a little flex, but will Not Stretch ~ DOES NOT FIT a TRUE 6x6.
  • Must be secured with nails or glue, should be pre-drilled if securing with nails. Can be painted, must use a paint that adheres to plastic..
  • Inside Dimension 5-5/8" x 5-5/8" Square, 1/8-inch-thick to protect your treated posts from water and sun damage ~ MADE IN THE U.S.A..
Check Stock

XtremeAmazing Heater Hose Repair Fitting Kit with Adapter Hose for 3.8L V6 Camaro Firebird 95-02

  • Compatible with 95-02 3.8L V6 Camaro / Firebird With 5/8" Heater Hose.
  • This kit includes 2 adapters, which bolt into your tensioner/heater inlet assembly, adapter mount screws, a 3/4" to 5/8" plastic heater hose adapter, 10" of 5/8" heater hose, and 4 stainless steel hose clamps. This kit will allow you to repair your broken heater hose ends on the 95-02 V6 Camaro/Firebirds that have the 3/4" and 5/8" heater hoses. This allows for easier repair in 1 complete kit so you can retain your stock 3/4" heater line..
  • NOTE : Camaro/Firebirds have models with 2 - 5/8" heater hoses, and models with 1 - 5/8" and 1 - 3/4" hoses. If your Camaro/Firebird has 2 of the 5/8" heater hoses, you need our 5/8" repair kit instead. This kit is for the cars with the 2 size hoses at the tensioner..
  • Package Contents: 1x Heater Hose Repair Fitting Kit.
Check Stock

85 Pieces Zipper Repair Kit Zipper Replacement with Instruction Manual and Zipper Install Pliers Tool, Black and Silver

  • Quantity and size: 15 x sliver sliders (3#, 5#, 8#), 15 x black sliders (3#, 5#, 8#), 6 x double sliver sliders (3#, 5#), 3 x double black sliders (5#), 15 x bottom stoppers (3#, 5#, 8#), 30 x top stoppers (3#, 5#, 8#), 1 x zipper install plier, and 1 x zipper instruction manual.
  • Zipper install plier: the zipper plier size is about 10.5 x 7 cm/ 4.1 x 2.75 inch.
  • Great for installing zipper stoppers, fits for various sizes of zipper stoppers.
  • Do it yourself: zipper repair kit includes various sizes of zipper sliders, bottom and top stoppers, with the help of the plier, you can fix zipper problems by yourself.
  • Widely applications: provides commonly applied replacement sliders in many sizes for the repairing of clothing, bags, outdoor tents, coats, jeans, jackets, purses, luggage, backpacks.
  • Useful zipper replacement: zipper repair set to replace broken sliders, also good for other DIY projects (Notice: please confirm your zipper size and type before you buy.
  • Small parts, please keep them away from children)Description.
  • The set allows for repairing worn out or broken sliders on plastic tooth and nylon coil-type zippers, you do not need to throw out garment and bags, save you much money..
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

Dometic 3311236.000 Cap and Base Vent Kit

  • USE – Mounts to the roof of your RV above refer. This allows circulation and the heat created by the refer to be released.
  • DIMENSIONS – Bottom Flange Overall: 25-7/8″” L x 8-1/4″” W Top: 23″” L x 6-3/4″” W Base Sits 3-5/8″” H Overall Mounting Holes for Cap Spaced: 21-7/8″” L x 5-3/8″” W Cap -Overall: 26-5/8″” L x 11-1/4″” W Cap sits 3-7/8″” H Mounting Holes Spaced: 21-7/8″” L x 5-3/8″” W”.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • [ Excellent Performance ] This tap and die set is ideal for cutting and renewing external and internal threads on most metals to exact standards. The tapered teeth of these threading tools are specially designed to start threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/....
Check Stock

SATA 60-Piece 3/8 Inch Drive Standard and Deep Socket and Bit Socket Set with 72T Ratchet, Metric - ST09004U-02

  • [VERSATILE SET] 18 - 3/8" 6pt Metric Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm, 11 - 3/8" 6pt Metric Deep Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, 3 - 3/8" DR Bit socket FD 5.5, 6.5, 8mm.
  • PH #3, 7 - 3/8" DR Bit socket Hex 3, 4, 5, 6, 7, 8, 10 mm, 9 - 3/8" DR Bit Socket Torx T10, T15, T20, T25, T30, T40, T45, T50, T55, 5 Accessories -2 - 3/8" - Spark plug socket 16mm.
  • 21mm, 3/8" - Universal joint, 3/8" Quick Release Ratchet, 1/2" F x 3/8" M 3-Way Adapter.
  • [MULTI-FUNCTIONAL] 24 Bit Sockets in 4 different types to cover many applications.
  • [EASE OF USE] Low profile quick released ratchet requires as little as 5° of swing arc to move a fastener.
  • [PREVENT FASTENER DAMAGE] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [ACCESS] Universal Joint for Better Access to Hard to Reach Fasteners.
Check Stock

MASTERCOOL 71700 Black Hydraulic Flaring and Swaging Tool

  • HAND-HELD HYDRAULIC PUMP requires a few simple pumps to flare and swage copper tubing.
  • 45˚ FLARE includes sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
  • EXPAND tubing using sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
  • INNER-OUTER REAMER provides a full metal grip and is designed to remove inner burrs easily.
Check Stock

TEKTON 1/4 Inch and 3/8 Inch Drive 6-Point Socket & Ratchet Set, 45-Piece (3/16-3/4 in., 5-19 mm) | SKT95301

  • 1-pc. 1/4 in. hex x 3/8 in. drive power socket adapter.
  • 7-pc. 3/8 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • 1-pc. 3/8 in. drive spark plug socket: 5/8 in..
  • 1-pc. 3/8 in. drive 90-tooth quick-release ratchet: 8 in..
  • 1-pc. 3/8 in. drive extension bar: 6 in..
  • 1-pc. reducer: 3/8 in. drive (F) x 1/4 in. drive (M).
  • Complete set has every size from 3/16 to 3/4 inch and 5 to 19 mm.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
  • Includes tools not found in most sets like a universal joint, power socket adapter, screwdriver bit adapter, and extension.
  • Strong resilient storage case with built-in parts tray keeps everything organized.
Check Stock

Oster Professional 10 Comb Set Specially Designed to Fit Oster Clippers.

  • Specially designed to fit Oster Clippers and almost any other clipper available.
  • Includes: # 0 (1/16"), #1 (1/8"), #2 (1/4"), # 3 (3/8"), #4 (1/2"), #5 (5/8"), #6 (3/4"), # 7(7/8"), # 8(1"), #10 (1 1/4").
  • The item is for the Classic 76 style clippers so it will not fit with trimmers by Oster that is a separate item (76926.800)..
Check Stock

Tosnail 12-Inch 3 Layers Plastic Craft Organizer Box Storage Container First Aid Carrying Case for Sewing, Painting, Arts - Clear

  • Overall Size: 12-3/4" L x 7-1/2" W x 6" H.
  • Inner Size: 12-1/8" L x 6-5/8" W x 3-1/8" H..
  • Features 2 interior cantilever trays with dividers to help keep your belongings organized. Made of plastic, BPA free. Clear box design for convenient see through..
  • The top tray with 4 compartments, large is 8” x 2-5/8” x 3/4” D, small is 2-5/8” x 2-5/8” x 3/4” D.
  • the bottom tray with 5 compartments, large is 5-3/4” x 3” x 1” D, medium is 5-3/4" x 2" x 1” D, small is 5-3/4” x 1-3/4” x 1” D..
  • The latch lock helps keep your items secure, and the top handle allows for easy portability..
  • Great organizer for your paint, craft supplies, fishing tackle, sewing notions and more organized portable and easy to access..
Check Stock

tenluno Thread Checker Nut & Bolt SWTC-44 Bundle Thread Checker Nut and Bolt Checker 44 MaleFemale Thread Identifier Gauges - 23 Inch & 21 Metric Sizes

  • 21 Metric Sizes part number : M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0.
  • 23 Inch Sizes part number : 6-32, 6-40, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16, 1-8, 1-12.
  • Each included size has a nut and bolt checker on the same gauge..
  • The size of the thread is engraved on it with a laser, and it is stored forever..
  • Easy to Easy to carry, easy to measure, a good toolcarry, easy to measure, a good tool.
Check Stock

5 3/8 X 24 CORDLESS

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
Check Stock