Categories

Best Atc Cnc Router

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

  • MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
  • 4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
  • 4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
  • American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

CNC Spoilboard Surfacing Router bit, 1/2'' Shank, 2'' Cut Dia, 1/2'' Cut Length, 4 Wings, Professional Woodworking Tools by KOWOOD PRO

  • KOWOOD PRO CNC spoilboard surfacing router bit is Much more smooth & 33% more efficient than others 3 wings CNC spoilboard bit..
  • KOWOOD PRO CNC spoilboard surfacing router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial application.KOWOOD PRO carbide support this bit in heavy duty use and for long time use.
  • Versatile woodworking tool. This bit is not only specially for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming, slotting or grooving. Great replacement bit tool for woodworking carpenter.
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel.
  • Universal 1/2” Shank suitable for all major router or CNC machine.
Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • [4 WINGS WOOD CNC ROUTER BIT 1/2 SHANK] Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • [HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • [WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well a....
Check Stock

MEIGGTOOL 7Pcs 1/4'Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2',3/8',5/16',1/4',7/32',3/16',1/8'(Red)

  • Size: 1/4"Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2",3/8",5/16",1/4",7/32",3/16",1/8".
  • Blade Material：Industrial grade C3 micro-grain carbide cutters and solid hardened steel bodies with high quality guide bearings provide superior wear resistance..
  • Widely Applications: The Top Bearing Rounding Edge Forming Router Bit Suitable for Woods, MDF, Laminate, Particleboard, Plywood compact panel, Acrylic, and etc. Avoid cutting metal and non-wood materials..
  • Easy To Use: Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
  • Router Collett: Contains a 1/2" to 1/4" Router Collett that easily fits into any router tables or router tools for a secure fit..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Comgrow 2 in 1 ROBO CNC 3018 5000MW Laser Engraving Module Compressed Spot,GRBL Control 3 Axis CNC Router Machine Kit with Offline Controller,End Mill Bits,for Wood Glass Mirror Stainless Steel

  • 【PRE-ASSEMBLED】Comgrow ROBO CNC 5W Laser Engraving for wood stainless steel stone glass ceramics is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey..
  • 【ULTRA-FINE COMPRESSION LASER】The laser power for this CNC laser and router machine is 5W, the high-power engraving speed is faster, and the accuracy is higher. The ultra-fine laser focus area is reduced to 0.08mm^2. The high-density laser can easily cut 4mm thick wood and black. Acrylic.
  • can directly engrave smooth stainless steel metal and ceramics..
  • 【AUTOMATIC TOOL-SETTING】Comgrow ROBO CNC router pre assembled machine can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors.
  • 【OFFLINE CONTROLLER】The Comgrow ROBO CNC router Laser machine can work without pc. ROBO supports operating without PC, THE CNC ROUTER IS EQUIPPED WITH A OFFLINE MODULE. Just transfer files to a SD card, you may begin creating and no PC needed..
  • 【COMPREHENSIVE AFTER-SALE SERVICE】 Comgrow ROBO CNC Engraving machine for metal stone wood glass Stainless Steel offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgr....
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Genmitsu 4PCS T-Track Mini Hold Down Clamp Kit, Compatible with 3018-PRO/3018-MX3/3018-PROVer CNC Router Machine

  • MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance.
  • DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height..
  • DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can also fit ALL other 3018 series desktop CNC router perfectly..
  • FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines..
  • VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 2 inch Cut Dia Slab Flattening Router Bit Carbide Planer Router Bits Woodworking Tools Wood Milling Cutter Planing Tool

  • 【CNC SPOILBOARD SIZE】: 4 wings wood cnc router bit shank: 1/2".
  • 【VERSATILE WOODWORKING TOOlS】: This professional surfacing router bit is not only perfect for wood slab flattening, resurface or plane the top....
  • 【HIGH QUALITY】: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating....
  • 【USE RANGE for CNC ROUTER BIT】: Suitable for Woods, MDF, Laminate, Particle Board, Plywood Compact Panel, acrylic and etc. Avoid cutting metal and....
  • 【SPECIAL NOTE】: Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving....
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock