Categories

Best Atwood 5th Wheel Landing Gear

New RV Wiring Harness w/Switch 5th Wheel Landing Gear Motor System 045-141892- Sold by Lil_Charm!

  • ➨ listing includes: 1 (One) 5th Wheel Landing Gear Switch / Harness Part# 045-141892.
  • ➨ Used to raise and lower the legs of the landing gear. ❀Universal and can be used with any motor. ❀ 12g wire and 30 amp in-line fuse - 4 wire Install (2 for motor / 2 for battery).
  • ➨ Heavy duty water tight switch ❀ Switch is labeled extend and retract for no guessing operation.
  • ➨ If you are converting you manual system over to a motorized system this harness is a must..
  • ➨ You must use 1 switch per 1 motor. ❀ Items are purchased in bulk quantities so no retail box..
Check Stock

Lippert 146060 Venture Follow Leg Fifth Wheel Landing Gear Repair Kit

  • Repair kit for follow leg on 5th wheel RVs.
Check Stock

Lippert Components 433458 Hydraulic Jack Assembly - Aluminum - 8,000 lbs Black

  • COMPATIBILITY — Designed to replace Level Up Hydraulic Jacks for the front, rear, driver, or passenger locations of your 5th wheel RV or travel....
  • EASY INSTALLATION — With minimal components needed, it’s easy to remove your RV’s old jack and replace it with this new aluminum, hydraulic jack.
  • RELIABLE STRENGTH — Engineered with an 8,000 lb. lift capacity, this large, aluminum landing gear replacement jack was built tough with a 9”....
  • REPLACEMENT PART — At Lippert, we help you take the guesswork out of replacement parts with exact-match components designed to get your RV’s....
  • IMPORTANT INFORMATION — Please reference your owner’s manual for detailed product installation and safety information before installation.
Check Stock

uxcell 5/16 Inch Diameter x 3 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 4PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 8mm(5/16").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

uxcell 5/32 Inch Diameter x 1.7 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 2PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 4mm(5/32").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

Lippert Components 1958604 Hydraulic Jack Assembly in Silver - Aluminum - 8,000 lbs. (Gen I)

  • COMPATIBILITY — Designed to replace Level Up Hydraulic Jacks for the front, rear, driver, or passenger locations of your 5th wheel RV or travel trailer’s automatic leveling system.
  • EASY INSTALLATION — With minimal components needed, it’s easy to remove your RV’s old jack and replace it with this new aluminum, hydraulic jack.
  • RELIABLE STRENGTH — Engineered with an 8,000 lb. lift capacity, this large, aluminum landing gear replacement jack was built tough with a 9” footpad, and 7 mounting holes.
  • REPLACEMENT PART — At Lippert, we help you take the guesswork out of replacement parts with exact-match components designed to get your RV’s equipment up and running as usual.
  • IMPORTANT INFORMATION — Please reference your owner’s manual for detailed product installation and safety information before installation.
Check Stock

Stromberg Carlson LG-1 Electric Landing Gear 5Th Wheel with Jacks, Gears, 29-1/2" Landing Gear w/5500# Motor

  • High speed Tuson landing gear motor for fifth-wheel RVs.
  • For use on Lippert power landing gear assemblies.
Check Stock

CURT 16722 5th Wheel Hitch Lube Plate, 12-Inch Diameter

  • WEAR-RESISTANT. This 5th wheel lube plate helps protect your 5th wheel hitch head from wear while towing heavy-duty 5th wheel trailers, creating a lubricating buffer between the hitch head plate and kingpin box.
  • LESS MESS. A 5th wheel lube plate is a far superior method to lubricating your 5th wheel connection with grease. Unlike grease, there are no messy spots to clean up afterwards. This lube plate also features unique, self-cleaning grooves.
  • STANDARD FIT. This 5th wheel lubrication plate is compatible with any standard 5th wheel kingpin. The inside tabs allow for a firm but flexible fit. The 12-inch outside diameter provides plenty of coverage for most 5th wheel hitches.
  • EASY TO INSTALL. Installing this 5th wheel lube plate is as simple as pressing it onto the 5th wheel kingpin before towing. Press it into place, hitch up your trailer and you're ready to tow.
  • DURABLE. For long-lasting use, this 5th wheel lube plate is made from tough white polyethylene plastic. Plastic construction stands up to heavy pressure while maintaining excellent lubrication.
Check Stock

CURT 16121 A16 5th Wheel Hitch with Base Rails, 16,000 lbs

  • SELF-RESETTING. This A-series 5th wheel hitch features a unique, ergonomic handle and extra-wide head to make coupling your 5th wheel trailer easier than ever. After uncoupling, the handle self-resets to the ready-to-couple position.
  • FULL ARTICULATION. This 5th wheel hitch provides controlled towing of your 5th wheel camper with its patented head technology. The head is built on a cast yoke with poly-torsion inserts that reduce shock loads, chucking and noise at the coupling point.
  • COUPLING INDICATOR. Built into this 5th wheel hitch is a 3-position indicator that shows the coupling status. It conveniently shows if the 5th wheel hitch is coupled, uncoupled or ready to tow.
  • TESTED STRENGTH. This 5th wheel hitch is tested and rated for 16,000 lbs. gross trailer weight and 4,000 lbs. vertical load (limited to lowest-rated towing component). It is tested according to SAE J2638 specifications.
  • VERSATILE FIT. This 5th wheel hitch comes with 5th wheel legs and 5th wheel base rails to mount onto under-bed 5th wheel brackets (brackets sold separately).
Check Stock

CURT 16104 Industry-Standard 5th Wheel Hitch Rails, Gloss Black, 25,000 Pounds

  • SOLID MOUNT. These 5th wheel hitch rails are rated to 25,000 pounds and provide secure 5th wheel hitch installation (hitch and under-bed mounting brackets sold separately). They are also tested according to SAE J2638 specs.
  • VERSATILE FIT. These 5th wheel base rails are industry-standard, meaning they accept any industry-standard 5th wheel hitch. They are compatible with virtually all CURT 5th wheel hitches (excludes puck system products).
  • CUSTOM-FIT. While these 5th wheel rails have an industry-standard, universal design, they are intended to be used in conjunction with a set of CURT custom 5th wheel brackets. The brackets bolt onto the truck frame with a vehicle-specific fit.
  • QUICK RELEASE. These 5th wheel rails allow you to maximize the functionality of your truck bed. They enable a 5th wheel hitch to be securely anchored in place for towing, and just as easily allow the 5th wheel hitch to be removed for hauling other cargo.
  • DUAL-COAT. For long-lasting resistance to rain, snow, mud, road salt and more, these 5th wheel installation base rails are shielded in a dual-coat of rust-resistant A-coat and durable gloss black powder coat.
Check Stock

CURT 16550 R20 5th Wheel Roller for Short Bed Trucks 20,000 lbs

  • TURNING CLEARANCE. This 5th wheel roller is designed to provide a 5th wheel slider hitch solution. It provides 12 inches of rearward travel for....
  • EASY TO INSTALL. This 5th wheel roller installs easily on any industry-standard 5th wheel base rails. They allow you to maximize the functionality of....
  • VERSATILE. This 5th wheel roller is compatible with any CURT industry-standard 5th wheel base rails and most CURT 5th wheel hitch heads (sold....
  • SOLID STRENGTH. This 5th wheel roller is rated for 20,000 lbs. gross trailer weight, allowing for a wide variety of towing applications (limited by....
  • DUAL-COAT. For dependable weather-resistance in your truck bed, this 5th wheel roller features a dual-coat finish of rust-resistant A-coat and a tough....
Check Stock

CURT 16265 Q25 5th Wheel Hitch, 25,000 lbs , Black

  • QUIET RIDE. This Q-series CURT 5th wheel hitch is engineered to promote the quietest 5th wheel towing possible. It features a patented, spherical axial bearing that allows the head to easily tilt in any direction needed.
  • COUPLING INDICATOR. Built into this 5th wheel hitch is a 3-position indicator that shows the coupling status of the hitch and your trailer. It conveniently shows if the 5th wheel hitch is coupled, uncoupled or ready to tow.
  • EASY OPERATION. This CURT 5th wheel hitch operates with a single, short-throw handle to promote ergonomic operation and easier coupling of your 5th wheel trailer. The handle is also lockable for maximum security on the road.
  • SAFETY-TESTED. Tested and rated for 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load, this 5th wheel hitch is capable of towing a wide variety of 5th wheels (limited to lowest-rated towing component). It tested to SAE J2638 specifications.
  • VERSATILE FIT. This 5th wheel hitch fits any industry-standard 5th wheel base rails, such as CURT rails #16104 and #16204 (rails and brackets sold separately) (Not compatible with articulating or turret-style pin boxes, such as Rota-Flex and Sidewinder).
Check Stock

CURT 16140 A20 5th Wheel Hitch, 20,000 lbs

  • SELF-RESETTING. This A-series 5th wheel hitch features a unique, ergonomic handle and extra-wide head to make coupling your 5th wheel trailer easier than ever. After uncoupling, the handle self-resets to the ready-to-couple position.
  • FULL ARTICULATION. This 5th wheel hitch provides controlled towing of your 5th wheel camper with its patented head technology. The head is built on a cast yoke with poly-torsion inserts that reduce shock loads, chucking and noise at the coupling point.
  • COUPLING INDICATOR. Built into this 5th wheel hitch is a 3-position indicator that shows the coupling status. It conveniently shows if the 5th wheel hitch is coupled, uncoupled or ready to tow.
  • TESTED STRENGTH. This 5th wheel hitch is tested and rated for 20,000 lbs. gross trailer weight and 5,000 lbs. vertical load (limited to lowest-rated towing component). It is tested according to SAE J2638 specifications.
  • VERSATILE FIT. This 5th wheel hitch comes with standard legs to easily and securely mount onto any industry-standard 5th wheel base rails, such as CURT base rails #16104 and #16204 (base rails and brackets sold separately).
Check Stock