Best Atx Mother Board - TopShopReview.com

Electronics-Salon 24/20-pin ATX DC Power Supply Breakout Board Module.

NOTICE: Please make sure your motherboard equipped with on-board USB 3.0 socket before purchasing.

ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..

Motherboard & Radiator Support: Compatible with 12 "x 10.5" CEB, ATX Mother Board and 360/280/240 Radiator.
Extremely spacious interior: GPU support max: 370 mm, height of the CPU cooler max: 175 mm, PSU support up to 300 mm.
Tempered glass: 5 mm thick tempered glass on the side wall and on the front.
Removable dust filter front, top and bottom, Front I / O: USB 2.0 x 2, USB 3.0 x 2, Audio, Mic.
More possibility: Support 8 slots in the rear and Vertical Graphic card (up to 40mm thickness).

1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..

KDMPOWER 350W MIPC-M7350C MICRO ATX Power Supply.
Micro SFX power supplies are known mostly as a replacement power supply and can also be used for mini-ATX cases.
115V/230V switchable power supply (International compatible) Compatible with ATX 12V.
100% compatible with the following models: In-Win IP-P300BN1-0 Power Man Sparkle FSP FSP300-60GHS FSP270-50SNV FSP270-50SNVS FSP300-60GLS-MJR FSP300-60GHS-R FSP200-50SNV FSP300-60GNV FSP300-60GLS FSP300-62GL.
Astec ATX202-3515 Bestec ATX-1523F ATX-1523D ATX-100-5 ATX-151 5184-2191 TTGI FP-250U Apex ALLIED AL-8250SFX AL-B200SFX Logisys PS350MA ISP 120SI AP-MP4ATX30.

LGA 1151 Supports 8th and 9th Generation Intel Core Processor.
Supports SO-DIMM DDR4-2133/2400/2666 up to 16GB Memory.
Supports 8 x PCIe x16 slots (50mm between X16 slots).
Motherboard Dimensions 19.1 Inch x 9.25 Inch ( W x L ).
This motherboard has NO 24 pin ATX power supply connector it uses eight 6 pin PCIe connectors for power and has 8 PCIe connectors as outputs to power GPU's. If using a ATX power supply you will need a 24 pin jumper to start the power supply..
Your CPU MUST have intergrated graphics. HDMI cable must be plugged into on board HDMI. This can be changed later in the BIOS if desired..

[9 Pre-Installed 120mm ARGB Fans]-- Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V-3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized..
[2 Tempered glass]-- C590 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere..
[I/O Panel]-- 2 x USB3.0 Port, 1 x Type C, 1 x HD Audio, Reset Button, Power Button..
[Cable Management]-- Back Bays: 3x 3.5'' HDD's and 3 x 2.5'' SSD's. Removable storage cable box.
[Remarkable Expansion]-- C590 Mid Tower Gaming Computer Case supports ATX/Micro-ATX/Mini-ITX motherboards..

Light up the system - 2 Pre-installed 200mm 5V MB Sync a RGB fans (Sync with as US, Gigabyte, MSI, as rock) +1 rear black fan.
Built-in dual-mode 5V ARGB switch board - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.
27 LED modes through I/O port button - Wave mode/ flow mode/ RGB lighting (single color)/ Radar mode (Red, yellow, green, Cyan, blue, White, Purple)/ breath mode (8 Colors)/ full lighted mode/ single color mode (7 Colors)/ light off.
Clear view of PC gaming - four 5mm tempered glass (left & right & Front & top) with standard mounting.
Built-in PSU cover - Removable PSU cover provides a better cable management and a tidy-looking system.
Drive Bays - 2. 5'' Ssd x 10 or 3. 5'' X 7.
Supports Mini ITX, Micro ATX, ATX, and E-ATX motherboard.
I/O port - USB 3. 0 x 2, USB 2. 0 x 2, HD Audio x 1, Type-C x 1.
Outstanding expandability - max CPU cooler height: 200mm.
Dimension - 22. 9'' X 11. 6'' X 23. 3''. 44. 31lbs. 3 Year.

Compatibility with system enclosures ranging from compact SFF desktops to traditional desk side ATX towers.
Up to 2x the graphics performance of competing products.
Large 4GB GDDR5 GPU memory capacity and memory interface is 128 bit.
Supports AutoCAD and SOLIDWORKS advanced photorealistic rendering.
Superior CAD graphics performance for value line business PCs.
Support for four monitors including 4K displays for signage applications.
Highest Highest performance low-profile professional graphics board currently available low-profile professional graphics board currently available.