Categories

Best Audio Attenuator

Fairfield Circuitry The Accountant

  • No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
  • The COMP-3A is a single-channel vintage-style Compressor/Leveler.
  • The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
  • This is the way audio components were built before integrated circuits became available.
  • Integrated circuits are small and cheap and widely used in most modern designs.
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

MDS-200A Amp 1600V Three-Phase Diode Module Bridge Rectifier Power Module Provide for Single Phase Rectification

  • Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (6DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (10DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (40DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (20DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (30DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter

  • Feature FG-100 DDS Function generator is a low frequency signal generator..
  • It is small size, full function, easy operating and portable. Its power supply can be either AC/DC adaptor or a Lithium battery..
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response..
  • Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (Only 1 Pcs of 3DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

  • 【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
  • 【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
  • 【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
  • 【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
  • 【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
  • 【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..
Check Stock

1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform

  • 1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery..
  • It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope..
  • The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response..
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
  • This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker..
Check Stock

USDR/USDX HF QRP SDR Transceiver SSB/CW Transceiver 8-Band 5W Ham Radio & Handhel Mic

  • 【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
  • 【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
  • 【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
  • 【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
  • 【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..
Check Stock