Dura Products DPABS-4312E Dura-ABS – 12V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EPDM Rubber
- AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
- HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
- KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
- DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
- DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock
CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)
- FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
- TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
- ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
- ⑥ max temp of tested liquid: 158°F/70°C.
- MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
- NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
- WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check StockBTMETER BT-846A Pro HVAC Anemometer Measures Wind Speed Wind Flow Wind Temperature CFM Air Flow Velocity Meter with Backlight MAX MIN AVG
- ➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
- ➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
- ➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
- ➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
- ➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....
Check Stock
Protmex Anemometer, Digital Handheld Anemometer with USB Interface, Portable Temperature Humidity Wind Speed Meter with LCD Backlight, Air Volume Flow CFM Meter, PT6252B (Battery Included)
- 【PROFESSIONAL AIR FLOW METER】Protmex PT6252B anemometer is a portable wind speed gauge that can accurately measure airspeed in 5 units: m/s, km/h, ft/min, knots, ft. Users can work under the dim surrounding with your anemometer via the bright backlit LCD screen..
- 【USB DATA LOGGING AND DATA SYNC ON COMPUTER】The Protmex air flow meter cfm comes with a USB cable and PC software support can connect the wind meter to the computer via a USB port. For wind data logging, analyzing, and monitoring..
- 【MULTI-FUNCTIONAL ANEMOMETER】The digital handheld anemometer can monitor and record wind speed, air volume, temperature, humidity, dew point temperature, wet bulb temperature, CFM airflow, and RH, perfect for balancing airflow in HVAC tasks such as duct vents, AC air output testing..
- 【SWITCHABLE READING】The Protmex wind gauge has the functions of reading holding, maximum value, minimum value, etc. With a large-screen LCD and backlight, the multi-unit switching function..
- 【ACCURATE AIR VELOCITY METER】Our Protmex wind speed meter for measuring wind speed range 0.5~30 m/s(+/- 2% of readings).
- Wind temperature -20~60℃, -4℉-140℉(+/-0.2℃,32.56℉).
- 2 temp sensors and 8 vanes make the meter is very sensitive to....
Check Stock
DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons
- Horizontal Inline mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer toDAE V-75. Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
- For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
- For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
- For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the o....
Check Stock
DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons
- Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
- Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
- Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
- Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check StockMass Air Flow Sensor MAF AUTOMUTO fit for 2014-2015 for GMC Sierra 1500 4.3L,2014-2015 for GMC Sierra 1500 5.3L,2014-2015 for GMC Sierra 1500 6.2L,2013-2015 for GMC Sierra 2500 HD 6.6L
- FIT VEHICLE - Mass Air Flow Sensor fits for 2012-2015 for Chevrolet Captiva Sport 2.4L,2012-2015 for Chevrolet Captiva Sport 3.0L,2015 for Chevrolet....
- REPLACE PART - 20787043 23262343 23118170 336-02349.
- FEATURES - Mass Air Flow Meter AFM Sensor measures the volume and density of air entering the engine, providing highly accurate airflow readings to....
- QUALITY AND INSTALLATION - Meets OEM specifications, Easy to Install direct replacement and Clean, Fast Response, High durability..
- Package Included - 1 PC Mass Air Flow Sensor.Please clean out the air box and replace the air filter before installing the MAF Meter, or the Code and....
Check Stock
UNI-T UT363S Handheld Anemometer Wind Speed Meter Wind Chill Air Temperature Gauge -14°F to 122°F/-10°C to 50°C with Extendable Wind Sensor LCD Backlight Max Min Avg Data Hold 1 Meter Drop Durability
- ⚡Pro Air Flow CFM Anemometer UNI-T UT363S. Measures wind speed, wind temperature (-14°F to 122°F/-10°C to 50°C), and wind scales (0~12). Precise wind speed sensor. Wind scale display. Measurement units: m/s, km/h, ft/min, knots, mph. ℃/℉switch. Auto ranging..
- ⚡Multi-Function Air Flow Meter. Large LCD display with backlight. Auto power off. Data hold for easy reading and recording. Max/Min value. Avg value. Versatile in engineering, seafaring, HVAC duct airflow, appliances checking (AC units/fan/exhaust fan), vehicle AC maintenance and more..
- ⚡Easy to use. Built with separated extendable wind sensor vane for easy readings while testing balancing the AC or dust collection system. An ideal weather monitor for windsurfing, flying, water sports (yachting/sailing/boat race), drone operating, outdoors (hang gliding/shooting/archery)..
- ⚡Safe & Durable. 1m drop test durability. Overload indicator. Widely used in mining, electric, iron and steel, petrochemical, energy-saving, navigation, fan manufacturing, exhaust ventilation, sporting and more..
- ⚡What you get: 1 x UT363S Anemometer, 1 x paper manual, 1 x e manual, 1 x gift box..
Check Stock
BTMETER Digital Anemometer Barometer Handheld, for Wind Speed Temperature Wind Chill Tester w/Humidity, Altitude, Barometric Pressure Meter for Climbing Drone HVAC CFM BT-100WM
- ➤【MULTIFUNCTION ANEMOMETER】BT100WM wind speed gauge meter measures not only Wind Speed, Wind Temp, Wind Chill Indicator, but also Relative Humidity, Dew Point, Barometric Pressure and Altitude. With data log, Tripod hole for mounting, it’s ideal for outdoor activities:Long Range shooting, Hunting, Sailing, Kite flying, Drone Driving, CFM air flow test..
- ➤【HIGH PRECISION】Digital wind meter for measure wind speed range 0.67 ~ 67.1 mph( +/- 5% accuracy).
- Wind temperature range -10~45℃,14℉-113℉(+/-2 ℃/℉).
- Wind meter measurement altitude from 0-19685 Ft. Resolution: 0.2 mph, 0.2℉,0.1% RH. So you can be rest assured to get fast and accurate reading..
- ➤【EASY TO USE】Measures different readings such as Max, Min, Average, Current Wind Speed, display in 5 units: mph, ft/min, km/h, m/s or knots. Temperature (Celsius/Fahrenheit), Elevation(M, Ft), Atmospheric pressure(inHg, hpa mbar). And LCD backlit screen makes it easy to read in day or at night..
- ➤【LOG THE BAROMETER DATA】This handheld wind speed meter can also log 16 groups of barometric pressure data for record, compare and analyse the relationship between temperature, humidity, and height. It’s compact pocket sized Pro anemometer for weather station, long distance shootin....
Check StockExtech AN100 CFM/CMM Mini Thermo-Anemometer
- Large display of airflow or air velocity.
- Simultaneous display of air flow or air velocity plus ambient temperature.
- Easy to set area dimensions (cm2) are stored in the meter's internal memory for the next power on.
- 3 percent velocity accuracy via low friction 2.83 Inch D (72mm) ball bearing vane wheel on 3.9 Feet (120cm) cable.
Check Stock
MMOBIEL YiHua 853D Soldering Iron Station Hot Air Gun 750 W 3 in 1 SMD Rework Solder soldering Station
- ...with an lead-free solder rework station, hot air gun 550W and power supply, using independent dual-core micro-controller, which means they can work independently. It is perfect for soldering and de-soldering (Removal) SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. LCD Display shows function Status and temperatures. 1 Analog meter Easy to deal with large joints, small spots and solder joint de-soldering..
- Microprocessor Stable Temperature: Hot air SMD soldering station uses the latest microcomputer processor PID technology! Comes with high-speed 100ms real-time tracking, with real-time calibration! The temperature fluctuation range ≤±1°C. Working Temperature Adjustable from 100 - 250 to 500C. Iron soldering station adapt to correct a temperature deviation caused by the environmental impact or replacement of heating elements, fans, soldering irons etc. The temperature range is corrected: ±50C..
- Auto Sleep Function: The soldering iron will automatically detect its working state. When it is in the static state and reach the sleep time, the temperature will automatically drop to 200 °C. It can effectively prevent the iron tip from oxidizing and prolong the service life, saving energy and environmental protection. This iron Sleep Function time can be set f....
Check StockAutomotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles
- 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
- 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
- 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
- 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
- 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock
FAERSI 22204-21010 74-50009 AF10029 Mass Air Flow Sensor Meter Original Equipment Replacement for Toyota 2002-2006 Camry, 2000-2009 4Runner, 2007-2009 FJ Cruiser, 05-09 Prius 1.5L, 99-09 Tacoma & more
- Mass Air Flow MAF Sensor measures the volume and density of air entering the engine, providing highly accurate airflow readings to the ECU over a wide range of ambient temperatures.【NOTICE】 Please clean out the air box and replace the air filter before installating this Mass Air Flow Sensor Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF..
- FAERSI maf can quickly clear P0100, P0101, P0102, P0103, P0104 ect fault codes caused by flow meters.Meets OEM specifications, Super easy to install and Clean,15 ms Fast Response, High durability（Plastic & Aluminum）. Buy with confidence, If you have any question,Please simply contact us for a replacement.【NOTE】Before purchase this MAF Meter, please use the year/make/model drop down bar confirm the compatibility or description to confirm the compatibility..
- Please contact us if you have any question regarding our this product, we provide a one-year worry-free warranty we will give you a satisfactory response within 24 hours! We provide "No reason to refund" Service [Note] Due to system problems, we lack the function of car model parts search. If you are not sure whether your car matches, please contact our professional customer service in time. ....
Check Stock
