Categories

Best Auto Air Intake Pipe

X-PRO 150cc Short Case Air cooled GY6 Scooter Engine w/Automatic Transmission Electric Start for GY6

  • Engine Type: Single Cylinder, 4-Stroke, 2-Valve Short Case 150cc GY6 CVT Auto Scooter Engine Use 743-20-30 Belt, Air cooled, CVT, 4 Stroke, auto....
  • GY6 150cc Engine, Automatic Transmission, electric start..
  • This engine assembly comes with Intake Pipe, Drive Sprocket, Sprocket cover & Spark Plug, but doesn't come with Carburetor, Battery, CDI, Voltage....
Check Stock

OZIS Portable Paint Booth 13X10x8Ft Upgrade Larger Filter System with 750W Blower, Inflatable Paint Spray Booth Larger Space No Tool Room, Portable Airbrush Painting Tent Workstation

  • New airflow ventilation structure design This booth adopts a new airflow structure design with two air intake pipes. One air inlet pipe is connected to the inflation column, and a high-power blower is connected to realize the functions of inflation and filtration for the booth at the same time. Another green air intake pipe is used to provide fresh air inside the booth, and a small power blower can be connected to enhance ventilation. Under normal circumstances, a high-power blower can meet the needs of painting work..
  • New structure for greater space Most booths are sewn to the inside of the air column. Our booth was sewn outside the air column. Make the booth get amazing work space. No tool room, and cars cannot enter. Applicable to auto parts, furniture and other items of spray paint..
  • Indoor use can be equipped with overspray suction device When the booth is used indoors, the exhaust gas will cause indoor pollution. It may even enter the booth again, causing the booth filtering system to fail. You can buy the special spray suction device for OZIS booth. By connecting the extraction fan and explosion-proof pipe, the discharged gas is led to the outside to avoid indoor air pollution. Improve the filtration efficiency and reduce the residence time of o....
Check Stock

X-PRO 150cc Short Case Air cooled w/Automatic Transmission Electric Start GY6 Scooter Engine

  • Engine Type: Single Cylinder, 4-Stroke, 2-Valve Short Case 150cc GY6 CVT Auto Scooter Engine Use 743-20-30 Belt, Air cooled, CVT, 4 Stroke, auto clutch, electric start..
  • GY6 150cc Engine, Automatic Transmission, electric start..
  • This engine assembly comes with Intake Pipe, Drive Sprocket, Sprocket cover & Spark Plug, but doesn't come with Carburetor, Battery, CDI, Voltage Regulator, Ignition Coil etc. Best of all, it comes with High quality aluminum cylinder head and iron cylinder body..
Check Stock

3 Inch Car Turbo Air Intake Hose, Universal Adjustable Flexible High Flow Turbo Cold Air Intake System Hose Pipe Tube

  • Durable in Use: This car turbo air intake hose made of high quality plastic material, has high hardness, no harmful coationg on its surface, safe and durable to use..
  • Flexible Design: This air intake pipe inlet hose can extendable to 100cm(39.4inch), 360 degree fully flexible..
  • Universal Application: This flexible cold air intake turbo hose universal fits for most vehicles with 76mm air intake hose..
  • Easy To Use : Easy installation without extra adjustment..
  • Low Noise : It has bigger horsepower and less noise..
Check Stock

Smoke Leak Detector, 2 MODE Automotive Fuel leakage Diagnostic Tester,Conduit PIPE System Leakage Tester,EVAP Leak Detector For 12V Vehicles

  • ...p you find out the leaked part in pipe..
  • POWERFUL EVAP SUPPORT — EVAP special connector can help you use with EVAP System of all vehicles to quickly find out the leak parts and come with 1.5m / 59inch smoke outlet hose to assist connect perfectly. The main functions of SDT-205 also include Air Tightness Test & Air Intake System Test..
  • TECHNICAL PARAMETER — Built-in air pump, no need to connect an external air pump, can be tested & repaired at any time, saving time and energy. Voltage: DC 12V(Supplied by Automotive Battery).
  • Output pressure: 15psi & Output smoke value: 1-6L/min. With over-heat and over-load protection..
  • WIDE COMPATIBILITY — The pipe fuel leakage detector is designed for detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks & speedboats, such as fuel pipe, cooling tank, intake system, exhaust system & EVAP system..
  • 3 YEARS WARRANTY — To ensure your high-quality shopping experience, we promise 3 years warranty. If you have any issues with using SDT-205, please feel free to contact us that we will provide you 100% satisfaction after-sales services. Buy and use with confidence!.
Check Stock

Intake Air Filter, Universal Car 3" Carbon Fibre Cold Air Filter Feed Enclosed Intake Induction Pipe Hose Kit

  • 【COMPATIBLE】- Air Filter Induction Kit with flexible cold air feed hose, carbon fibre air induction system designed to fit most of cars. Produced according to the professional standard, you can be purchased and used with confidence..
  • 【HIGH QUALITY】- Air Filter with carbon fibre shell, beautiful appearance and lightweight, good noise reduction property and heat insulation. Keep heat to minimum and maximize the air flow..
  • 【FUNCTION】- Intake Air Filter can effectively increase horsepower and improve the gas mileage, make the oil combustion complete and decrease the oil consumption. Reduce engine's carbon deposit and prolong it's service life..
  • 【EXCELLENT PERFORMANCE】- Intake Induction Filter adopt airbox design, it can store a plenty of fresh air and avoid blocked by insufficient air intake while oil return. Extremely improving the smoothness of driving. With washable and reusable filter cartridge, economical and practical..
  • NOTE - Our Induction Kit does not include intake turbine.For some cars,you may need an additional pipe..
Check Stock

Turbonator Dual Fan,64mm/2.5in Intake Turbo Fan Diameter Aluminum Alloy + Rubber Car Air Intake Turbonator Dual Fan Turbine Supercharger Gas Fuel Saver Turbo (Red)

  • FEATURES: Increase the intake air volume of the combustion chamber by the turbofan, improve the combustion efficiency of the combustion chamber gas and thus enhance the horsepower..
  • WORKING PRINCIPLE: ABS new material fan blade draws air into the combustion chamber at a higher rate, Improve the atomization degree of the combustion chamber, increased horsepower and gasoline savings..
  • MATERIAL: ABS new material fan blade+Aluminum alloy pipe. ABS material is corrosion resistant, heat resistant, high hardness and does not produce metal debris entering the combustion chamber. Aluminum alloy pipes are corrosion resistant, durable and lighter in weight..
  • INSTALLATION POSITION：The turbine is installed in the intake hose of the engine, and the best position is 10cm-30cm / 3.94 "- 11.8" before the throttle valve. Note: suitable for car models with inlet pipe diameter greater than 2.5 inches..
  • PACKAGE and SIZE : 1 x Intake Fan,3 x Rubber Loop,Intake turbine size: 7.5cm x 6.5cm/ 2.9inch x 2.5inch..
Check Stock

Air Cleaner Intake Hose Tube with Clamps for 2007-2013 Nissan Altima 2.5L 4 Cylinder Engine 16576-JA000

  • 【OE#】16576-JA000.【Replace OE#】696-085. Replace your broken air intake hose, easy to install, would be restore drive-ability and fuel economy. Package included: Air intake hose x1, clamps x3..
  • 【Compatible with】For Nissan Altima 2007-2013. Please check your vehicle in the Amazon Fitment Filter System in the top left corner. Compatibility information provided is for reference only. Please make sure to match the exact part numbers between this part and the part that you are replacing..
  • 【Function】Air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. The intake hose cracks, chips, or breaks can develop cracks and holes which can result in a check engine light (CEL), poor fuel economy, and hesitation during acceleration, under these circumstances, you need replace it timely!.
  • 【High-quality】Made of rubber materials that contain the component of high-tenacity fibre, have more enhance antioxidant and anti-aging, fully resist cracking caused by drying and prevent soften from high temperature. While thi....
Check Stock

Cold Air Intake kit with Filter for 1999-2004 Ford Mustang 3.8L V6 Red

  • Fit for 1999 2000 2001 2002 2003 2004 Ford Mustang Base 3.8L V6 Engine(Please MATCH your vehicle on the left top before purchasing).
  • This cold air intake system designed to increasing 8-10% horsepower & 6-10% torque, improveed fuel economy and creating an attractive intake noise..
  • MOOSUN intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's....
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
  • Come with all you need in the picture, ready to be installed.
Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

  • ... the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats..
Check Stock

NIBBI High Performance Air Filter Intake Curve Pipe Air Filter Elbow Air Intake Pipe Air Intake Elbow For GY6 Engine

  • This is an air intake pipe specially manufactured by Nibbi..
  • It can be used to lengthen the air intake duct to fit the body of the motorcycle, and it can be used where there are not enough places or where....
  • It does not have any effect on the exhaust emissions of motorcycles, and it will not affect the power system and it does not participate in emissions..
  • Please contact us if you have any questions, Nibbi will always be your trusted partner.
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ，make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock

Imperial 4" Premium Intake Cap with Built-In Pest Guard Screen, White, PA-4W

  • Easy to install fresh air intake vent cap.
  • Not for use in clothes dryer applications.
  • Paintable plastic components contain UV stabilizer to reduce fading due to exposure to sunlight.
  • Fits a 4-inch pipe diameter/vent opening.
  • The outside dimensions of the cap cover plate is 6” x 6”.
Check Stock