LI LEAD Auto Starter 12V Car Battery Protector - Automatically Disconnect System for Car Battery Saver Battery Voltage Disconnect Kit Battery Buddy.

  • ✫【WHAT IS THIS LIKE?】LI LEAD Auto Starter is NOT a Jump Starter. It's a Battery Protector (Much safer than Jump Starter). This is a kit which is....
  • ✫【Easy Operation】You can recover your battery by pressing the little button on the windshield(where you stuck it to), the battery will magically....
  • ✫【Fit for 12V Cars】(CAUTION! Fits for post type batteries ONLY!) Maximum current for the Auto Starter is 2400A for 10mS and up to 100A....
  • ✫【Plug and Play 】Easy Insatllation. The Auto Starter Comes with Dual models--Negative and Positive (package comes with two size of terminals).....
  • ✫【Read Before Order】Auto starter is a Battery Controller, It can prevent battery over discharge, prevent vehicle breakdown duto the flat battery....
Check Stock

12V Battery Vehicle Start Protector,Automatic Battery Protector Bundle Disconnect System Auto Starter for Car Battery Saver Battery Voltage Disconnect Kit

  • 【Auto Starter】Our upgraded Starter is much more convenient, no need to find a your KEY to open the door(Especially convenient for the Remote Start....
  • 【Battery Saver】Auto Starter is NOT a Jump Starter. It's a Battery Protector (Much safer than Jump Starter). It can protect your battery and give....
  • 【Easy Operation】Plug and Play.Bolt-on Directly to the Battery,No need to Mount with Rubber Band.You can recover your battery by pressing the....
  • 【Negative and Positive】The Auto Starter Comes with Dual models--Negative and Positive (package comes with two size of terminals). If you have....
  • 【Fits all 12V Cars】Maximum current for the Auto Starter is 2400A for 10mS and up to 100A continuous current and is suitable for Cars, Suvs,....
Check Stock

Wire Terminal Crimping Tool Kit Qibaok Ratcheting Wire Crimper AWG 22-16 0.5-1.5mm² with 500PCS Female Male Spade Connectors & Bullet Connectors Terminals

  • Package Included: A self-adjusting wire terminals crimping pliers and high quality 500pcs wire crimp terminals with 500pcs insulating sleeve assortment kit..
  • Wire Crimper Design: Made of high-carbon steel and TPU insulated rubber, and ratcheting mechanism design help you take less strength to make a good crimp. Crimping range is AWG22-16, 0.5-1.5mm², suitable for TAB 2.8mm, 4.8mm, 6.3mm spade connectors and 3.5mm, 4.0mm Bullet connectors..
  • Premium Material: The terminal block are made of tin-plated red copper and the insulating sleeves are made of nylon. High conductivity, anti-oxidation, durable enough for most wiring projects..
  • Easy To Use: Just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily..
  • Wide Applications: The combination of crimping tool and spade bullet connectors can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting / disconnecting, motorcycle, scooter, auto, car, truck, boat etc..
Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

  • ✅ 【Adjustable Crimping Tool】With an automatic adjustment ratchet mechanism, an adjustable locking device, and the function of releasing pressure points. crimper tool is designed to crimp 24-14 AWG non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
  • ✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
  • ✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
  • ✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
  • ✅【Widely Application】The combination of crim....
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • ...essing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • ...y pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.
Check Stock

CRC 5113 Grease

  • PROFESSIONAL DIELECTRIC GREASE: Keeps wiring and connections free from corrosion, salt air, and dirt..
  • ELIMINATE BATTERY CORROSION: Keep nav light ports clean and corrosion free. Eliminate Voltage leaks from connections..
  • PROTECT ELECTRICAL CONNECTORS: Use Silicone Dielectric Compound on all your electric connections on your boat such as fish finders, batteries and more..
  • EASY APPLICATION: Easy apply tube allows you to use what you need and save the rest for later..
  • MARINE AND AUTO: Hundreds of uses like spark plugs, trailer hitches, battery terminals. -67F to 482F (-55~250°C).
Check Stock

Traxxas 2952X Series 4 6C 4200 Flat w/Traxxas, 2952X by Traxxas

  • Traxxas 2952X - Power Cell 6C 7.2V NiMH Battery 4200mAh Flat.
  • Features: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings MAXX cable high-efficiency 12 gauge silicone jacketed wire Sub C size cells.
  • Specs: Length: 5.3" (134mm) Width: 1.7" (44mm) Height: 0.91" (23mm) Charge Rate: 3A.
  • Part number(s) included (in factory packaging): 2952X.
Check Stock

ProMariner 31505 ProMar1 DS Generation 3 Digital Battery Charger - 5 Amp

  • Auto Maintain/Energy Save Mode Extends Battery Life.
  • Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals.
  • Quiet EMI Design meets US FCC Emissions Requirements.
Check Stock

TRIPP LITE - RV1250ULHW PowerVerter 1250-Watt 12VDC RV Inverter/Charger

  • 12V DC or 120V AC input and 120V AC output (hardwired).
  • 1250 Watts continuous output, with 2500-Watt DoubleBoost capability.
  • 3 stage, 14/55-amp selectable wet/dry cell battery charger.
  • Built-in Isobar premium AC surge protection and Auto Transfer Switching option for battery backup and UPS operation.
  • High reliability large-transformer design with protected DC and AC wiring terminals.
Check Stock

TowerTop Battery Charger, 2/10/25Amp 12V Fully Automatic Smart Trickle Charger, Automotive Battery Maintainer with Engine Start, Winter Mode, Recondition, Desulfation, LCD Display, ETL (BC-025 PRO)

  • ... vehicle in 100 seconds. The car battery charger, +0.2v on the basis of the original charging voltage, better boosts your battery activity and charges more thoroughly in low-temperature situations..
  • 【Restore and Maintain Your Batteries】 The smart battery charger auto-detects and repairs severely-sulfated battery terminals (15.8V), and recondition battery (15.8V) to rehabilitate the lost performance. Auto-stop when fully charged, auto-awake and pulse compensate after voltage drops allow a long-time connection, with charging fuller and battery more durable..
  • 【Multi-Safety Protection】 Certificated by ETL. Smart-chip-controlled, with intelligent 8-stage charging for added charging precision, battery power optimization, and extended battery life. No worry about battery issues like Spark, Overtime Charging, Overheating, Reverse Polarity, Over-Discharge, Current Backflow, Short Circuit, Over Voltage, Over Current..
  • 【Advanced LCD Display】 Intuitive words, vivid icons, and switchable interfaces give you a real-time and visual means to track battery status, charging modes, charging stages, and easily do troubleshooting. Superfast heat-dissipation better improves the working performance. Full-wrapped clips with larger openings and firmer covers are per....
Check Stock

Military Spec Battery Terminal Positive and Negative Connectors for Marine Car Boat RV,Vehicles (1 Pair)

  • Battery Terminals and Covers Widely Used for Car Marine Boat RV Truck Camper ATV UTV Vehicles Battery Banks etc..
  • 1 pair of military spec Battery Terminals for increased strength and reduced corrosion.3/4"x 1-1/2" adhesive lined heatshrink,2 gauge 3/8" copper lugs.
  • Battery Terminals Made of sturdy lead-antimony alloy, anti-rust, and anti-corrosion, with excellent wear resistance, longer service life, very durable..
  • NOTE: Copper lugs that are included are for 2 gauge wire only, 2/0 gauge wire is a larger diameter and requires a different lug (Battery Cable Not Included)..
  • Battery Terminals Positive and negative are clearly marked on the terminal, also with durable red and black military style battery terminal covers..
Check Stock

Battery Terminal Cleaners (2 pcs), Plus 12 pcs Battery Terminal Anti-Corrosion Fiber Washers (6 Red & 6 Green) for Car Marine Battery

  • Package includes: 2 battery corrosion cleaners & 12 battery anti-corrosion fiber washers (6 red & 6 green).
  • The battery terminal brush can help clean dirt, debris and corrosion that can build up on cables and batteries. Simply take the metal cap off to expose the internal brush hidden inside. Press down over the battery terminal and twist and turn for cleaning. It only takes a minute to clean. During winter months – clean terminals will help your car start easier with less battery drain.
  • The fiber battery terminal washers can be used for both top post batteries or cables and side post batteries or cables. For use with 6 and 12-volt batteries. Each cleaner is color coded for positive and negative terminals, red for +, green for -. The inner ring can be removed to fit larger terminals.
  • These battery post cleaners fit both positive (+) and negative (-) terminals and are compatible with top and side terminal batteries.
  • Tips: After cleaning, wipe on a generous coat of dielectric grease on terminals and contacts to reduce future corrosion, repel moisture, and improve weather resistance.
Check Stock