Categories

Best Auto Compression Spring

ZEROMX Zipline Spring Brake Extra Long 5.3 FT, Heavy Duty Stainless Steel Zipline Stopper, Kids Backyard Zip Line Spring Braking System/Stop/Stopper for 3/16 1/4 5/16 3/8 inch Wire

  • PREMIUM QUALITY COMPRESSION ZIPLINE SPRING ---- Compression of the spring absorbs the momentum of the rider and brings them to a stop. It is not the length of the spring, but the compression force of the spring that really determines whether to brake in time to ensure safety. Unlike other normal spring on the market, our spring is made of heat treated stainless spring steel,it has longer service life and better elasticity,Not easy to rust..
  • SPECIFICATIONS ---- 5.3' Long 1 1/4" outer diameter compression spring,suitable for zip lines less than 200ft, compatible with 3/16, 1/4, 5/16, 3/8 inches diameter zipline cable/wire. It can protect adults whose weight is within 350lb on the safe slope 2°to 3° of the ground. Stronger braking forces can be obtained by increasing the number of cable springs used..
  • SILICONE BUFFER PLUG ---- Our rubberized stoppers was One-time injection molding with no cracks and gaps. The spring and the rubberized stoppers are firmly bonded together that you don't have to worry about the damage caused by thermal expansion and contraction in spring, summer, autumn and winter..
  • EASY TO INSTALL ---- Just feed the cable through the rubber ends of the spring brake and you are ready for installation,you can finish it within 3 minutes witho....
Check Stock

InSinkErator Wave Instant Hot and Cold Water Dispenser System - Faucet & Tank, Chrome, HC-Wave-C

  • 2 spring piston handle assemblies with auto-off hot and locking cold levers.
  • 9-1/4 in. overall height with 4-1/2 in. gooseneck spout projection.
  • 1/4 in. compression stainless steel flex lines and Santoprene hose outlet to tank.
  • Quick heating water tank (QHT) - REQUIRED! SOLD SEPARATELY.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Supreme Suspensions - Universal Add-A-Leaf Spring Installation Tool | Heavy Duty Forged Steel Leaf Spring Unloading/Compressing Tool Powder Coated Black

  • HEAVY-DUTY TOOL DESIGNED TO SAFELY INSTALL A SET OF ADD-A-LEAFS OR IN-PACK-HELPER SPRINGS.
  • Suitable for Most Trucks and SUVs with leaf spring suspension..
  • CONTENTS: (1x) Leaf Spring Unloading/Compressing Tool, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Cold-Forged from High Strength Carbon Steel for Maximum Strength and Durability.
  • Self-Centered, U-Shaped Design to Completely Surround the Spring Pack Allowing an Even Unloading and Compression of your Leaf Springs..
  • EASY TO USE: Position the Leaf Spring Unloading/Compressing Tool over the spring pack, and tighten down the compression bolt to safely unscrew the center pin nut, and remove the leaf pack center pin. After removing the center pin, loosen the compression bolt until the springs decompress, allowing you to safely add the new add-a-leaf in the appropriate location. Reinstall the leaf pack by tightening the compression bolt and reinstalling the center pin..
  • BENEFITS: Allows for Even Unloading and Compression of your Leaf Springs to install a set of Add-a-Leafs or In-Pack-Helper Springs..
Check Stock

Trsmima Heavy Duty Stainless Steel Zipline Spring Brake Extra Long 6.5 FT, Zipline Stopper, Kids Backyard Zip Line Spring Braking System/Stop/Stopper for 3/16 1/4 5/16 3/8 inch Wire

  • ✔️EXTRA LARGE LONG--6.5' Long 1 1/4" outer diameter compression spring, a safer zipline spring brake.Suitable for zip lines 1.over 60ft, compatible with 3/16, 1/4, 5/16, 3/8 inches diameter zipline cable/wire.This compression spring brake will give you that extra cushion you need and 100% guarantee your safety..
  • ✔️PREMIUM QUALITY:Unlike other normal spring on the market, our spring is made of heat treated stainless spring steel,it has longer service life and better elasticity.Not easy to rust..
  • ✔️PATENTED DESIGN:Compare with other stoppers on the market, Our patented design:Rubberized stoppers have built-in high-quality iron tube, which can prevent the cable from rubbing on the stoppers for a long time to cause the stoppers to break.The rubberized stoppers at each end protect the cable, the trolley, and the rider with a smooth finish..
  • ✔️EASY TO INSTALL: Just feed the cable through the rubber ends of the spring brake and you are ready for installation,you can finish it within 3 minutes without any tools..
  • ✔️SAFETY COMES FIRST:Compression of the spring ....
Check Stock

8MILELAKE Macpherson Strut Spring Compressor

  • This Macpherson Strut Spring Compressor designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice. compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge. Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut.
  • threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • it allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
  • The 8MILELAKE Macpherson Strut Spring Compressor constructed with forged hooks and center screw hardened for maximum strength and longevity.
  • A plastic carry case is included. easy to organize and carry the tool.
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • Heavy Duty 11-1/2” Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring.
  • For repairs on bent struts, strut tubes, and damaged pieces.
  • Attach the brackets completely onto the spring, tighten, and remove the strut.
  • Lubricate threads with anti-seize compound for prolonged life..
  • Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
  • Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools..
  • Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ....
Check Stock

ACE - 579505 Dual Knee Strap Provides targeted pressure on sore tendons Satisfaction Guarantee

  • EXCLUSIVE PATENT--- Spring knee support technology: An anatomically contoured patella gel pad surrounds your kneecap, double-sided metal spring....
  • UPGRADED DESIGN--- Overcome the defects of similar products, medical knee braces with no allergies and itchiness. Metal spring stabilizers on both....
  • INNOVATIVE TECHNOLOGY--- High-elastic compression fabric has the effect of keep knee warm and reduce stiffness, reducing inflammation and swelling,....
  • COMFORTABLE EXPERIENCE--- We got a well balance between compression and comfort, premium knee brace will apply even compression for your joint, which....
  • MULTIFUNCTION--- Innovatively designed from #1 BEST BRAND of knee brace: NEENCA. Medical knee sleeve for Meniscus Tear, Arthritis, ACL, PCL, MCL,....
Check Stock

ABN Compression & Extension Spring 200 pc Assortment Set, Heavy-Duty Steel Wire – Metal Tension Springs Replacement Kit

  • EFFORTLESSLY FIX THE PROBLEM: The ABN Compression & Extension Spring 200 pc Assortment Set, Heavy-Duty Steel Wire – Metal Tension Springs Replacement Kit is a selection of 200 tension-giving spring devices in 20 different sizes and styles so you do not have to waste time and money searching at the hardware store for that one spring.
  • This assortment includes a wide range of small compression and extension springs for workshops and home repairs.
  • VARIOUS APPLICATIONS: Replace old, rusted, busted, or missing springs with these strong steel springs in any shop or household application.
  • Fix a pull-down screen in your motorhome, repair your swinging camper door, gate latch, printer, or even use as a cage spring lock – the possibilities are endless.
  • PERFECT TENSION: Constructed from #75 zinc-plated steel for rust resistance, maximum strength, and ultimate longevity.
  • Spring coils are both durable and flexible for the right amount of tension.
  • EASY STORAGE: Transparent 8.1” x 4.1” x 1.1” inch (20.6cm x 10.4cm x 2.8cm) clear plastic carrying tray for easy transportation, safe storage, and quick organization.
  • Sizing chart included for simple identification.
  • 20 SIZES: Compression springs – (10) 9/32” x 1/2.
Check Stock

XJS 3mm OD x 0.3mm Wire Dia x 10mm Long Compression Spring Connectors 100 Pcs

  • Extension Spring Size : 3 x 0.3 x 10mm/0.12" x 0.012" x 0.39"(OD*Wire Dia*L).
  • Package Content : 100(+/-2%) Pcs Compression Spring.
Check Stock

300 Pcs Compression Springs Assortment Kit, Stainless Steel Springs, Spring Assortment for Shop and Home Repairs, 30 Different Sizes with Individual Bags

  • 【30 Different Sizes, 300 Pieces Spring Assortment Kit】Our spring assortment kit includes 30 different sizes, each sizes has 10Pcs, and total 300pcs in box..
  • 【Premium Compression Spring】 Smooth and no stab, good fatigue strength, high ductility. Spring coils are both durable and flexible for the right amount of tension..
  • 【Each Sizes Spring Steel Come with Individual Package】Size :【A×B×C】A is Wire diameter, B is Outer diameter, C is Free length： 【0.011″x0.16″x0.39″】.
  • 【0.011″x0.16″x1.18″】； 【0.016″x0.20″x0.39″】.
  • 【0.016″x0.20″x1.19″】； 【0.020″x0.24″x0.39″】.
Check Stock

NTR Zipline Spring Brake,Brake Zip Line, Zip String 6.6FT Extra Long High-Strength Compression Stainless Zip Line Spring, Steel Ziplines Brake, Zipline Brake System/Stop/Stopper, Zipline Parts

  • ...ct adults whose weight is within 350lb on the safe slope 2°to 3° of the ground（drop rang 3%-5%). If the zipline wire lenght more than 200ft or the ridder weight more than 350lb, two, three or four springs can be added to your zip line for additional stopping power..
  • 【Compression Zipline Spring】It is not the length of the spring, but the compression force of the spring that really determines whether to brake in time to ensure safety. Our 6.6ft extra long high-strength compression stainless steel spring is a great addition to your backyard zipline. Our Upgrade durable stainless steel spring has longer service life, which is more weather resistant than other bungee brake..
  • 【Superb Craftsmanship】Unlike the others, Our rubberized stoppers was One-time injection molding with no cracks and gaps. The spring and the rubberized stoppers are firmly bonded together that you don't have to worry about the damage caused by thermal expansion and contraction in spring, summer, autumn and winter..
  • 【Easy to Install】Without any tools Just feed the zipline cable through the rubber ends of the spring brake and you are ready ....
Check Stock

ECCPP Universal Macpherson Strut Spring Compressor Kit Interchangeable Fork Tool Set

  • 【VERSATILE APPLICATIONS】 This ECCPP Macpherson Strut Spring Compressor Kit Can work with different spring configurations and fit for most modern cars with Macpherson strut and coil spring assemblies..
  • 【PRACTICAL】 Used to assembly and disassembly the MacPherson shock absorber springs. You usually need to perform this operation If you need to replace worn support rods, broken springs, or upgrade springs for better appearance and operation. The jaws with safety lip, locks the spring in place during compression can ensure safety of the operator..
  • 【FEATURES】 Forged by high quality steel, durable and stable. Three sets of configuration options, can used for 65-125mm, 88-160mm, 126-212mm shock absorber spring, can meet your different needs of replacing coil spring..
  • 【PACKAGE INCLUDING】 1pc compression rod, 3 pair interchangeable yokes, 1pc adjustment spacer, 6pcs fixing bolts, 1pc blow case for easy carrying and storage..
  • 【TIPS】 We will randomly send blue or red case to you, except for the color, they are exactly the same. Please check the vehicles information or tool information before purchasing..
Check Stock