uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock
uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock
uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock
uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool
- Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock
uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock
uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock
Arboleaf Smart Scale for Body Weight, Bathroom Scale, Digital Scale Body Weight and Fat, Bluetooth, Smartphone APP, 400 Lbs
- ...o that you can track and manage your health metrics easier and more convenient.
- 4 high precision sensors and 4 sensitive electrodes together ensure arboleaf smart scale accurate and consistent body composition analysis.
- Just step on the body fat scale to get timely readings, no more tapping to activate scale with body fat and water weight.
- Auto-connection, auto-recognition, auto ON/OFF, auto-calibration, low battery and overload indication of this bathroom scale.
- Just a simple and easy step towards a healthier lifestyle.
- Syncing with easy-to-use Arboleaf app and supporting Bluetooth 4.0, Android 4.3, IOS 8.0 or above system, our Arboleaf smart scales for body weight and fat can instantly show the daily, weekly, monthly progress and changes on the graph.
- Arboleaf smart scale digital weight and body fat can transit your health bathroom scales data to your favorite fitness app including APPIE HEALTH, GOOGLE FIT, FITBIT APP, which already used by over millions satisfied users.
- 1 Step, 14 Key Body Composition Analysis.
- The weight scales with body fat and water weight can tell you 14 essential body compositions including weight, body fat %, body type, visceral fat, body water %, muscle mass, bone ma....
Check StockAmazon Basics 150-Sheet Autofeed Micro-Cut Paper Shredder
- Micro-cut shredder turns paper into tiny confetti-like pieces measuring 5/32 by 15/32 inches (4 by 12 mm).
- shreds 6x smaller than standard cross-cut shredders (2,235 pieces vs. 360 pieces).
- Shreds up to 150 sheets (auto feed, loaded into 8.5-by-11-inch paper tray) and up to 10 sheets (fed manually) of 20-pound bond paper at a time (no need to remove staples or small paper clips).
- 60 minutes on / 45 minutes off (auto feed tray).
- 10 minutes on / 45 minutes off (manual feed slot).
- auto shut off protects the motor from overheating.
- 4-mode control switch (auto/on, off, reverse, forward).
- LED indicators (feed error, bin full, door open, overload, overheat).
- Important Note: Do not spray or keep any aerosol products in or around the shredder and do not shred items like metallic credit cards.
Check Stock
uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade
- Tap Size: M1.8 x 0.35 metric thread, H2 thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
- Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
- Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.
Check Stock
GBC Paper Shredder, Auto Feed, 80 Sheet Capacity, Cross-Cut, 1 User, Personal, Stack-and-Shred 80X (1757574)
- AUTO FEED – Auto feed takes the headache out of shredding: just stack, shut and shred. Simply put a stack of up to 80 sheets into the auto feed chamber and rollers will feed it into the cutters..
- CROSS-CUT SHREDDING – Convenient cross-cut shredding meets everyday security needs with P-3 Level Security. Excellent for home office use..
- AUTOMATIC JAM CLEARANCE – Smart, user-friendly Auto+ Jam Clearance feature automatically reverses and re-feeds stuck papers..
- SELF-CLEANING CUTTERS – Self-Cleaning Cutters automatically remove shreds that can cause build-up and lead to jams. Convenient Power Save Auto Shut Down feature helps conserve energy..
- CONVENIENT FEATURES – 5-gallon bin provides plenty of shredding capacity. Bin-full indicator alerts you when it needs to be emptied. Ultra-quiet machine minimizes disruptions..
- SUPER-VERSATILE UTILITY – Machine shreds up to 80 pages with auto feed, or 6 sheets at a time manually. Powerful enough to shred paper clips, staples and credit cards..
- BUILT TO LAST – GBC stands behind this high-quality shredder with a limited 2-year warranty, and a limited 5-year warranty on the cutters..
- CCPA COMPLIANCE – GBC shredders help your organization maintain compliance with the California Consumer Privacy Act (CCPA). Shre....
Check StockBONSEN Paper Shredder 90-Sheet Auto Feed & 6-Sheet Manual Micro-Cut Shredder Paper/Credit Cards/Staples/Clips P-4 High Security Shredder for Office Home with 5.3-Gallon Wastebasket Black S3109
- 【Auto Feed 90 Sheets & Manual 6 Sheets Shredding】 The auto feed tray can take up to 90 sheets at a time. The manual feed tray can take up to 6....
- 【Long Running Time & High Speed Shredding】 In auto feed mode, the machine can run continuously for 18-20 minutes. In manual feed mode, the machine....
- 【High Security P-4 Level】 Document shredder protects your privacy perfectly! It shreds paper into 5/32" x 30/64" ( 4mm x 12mm ) size with....
- 【Visible 5.3-Gallon Wastebasket】 5.3-Gallon large wastebasket capacity, no need to empty the bin frequently. Transparent window with light,....
- 【Safe Protection & 1-Year Warranty】 Pull out wastebasket or open the auto feed tray's cover, office shredder will stop working immediately.....
Check Stock
uxcell Straight Flute Taps M8 x 1.25 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool
- Straight Flute Taps: Thread size: M8 x 1.25.
- cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock
uxcell Straight Flute Taps M12 x 1.5 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool
- Straight Flute Taps: Thread size: M12 x 1.5.
- cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock
