Categories

Best Auto Gas Spring Strut

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ...t is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door..
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door..
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction an....
Check Stock

Bilstein B4 Front Struts & Rear Shock Absorbers Kit For BMW E90 E91 E92 3.0L L6

  • This package contains 2 front driver and passenger side complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring seat and isolator. A spring compressor is not required for installation.
  • OE / Interchange: 172901, 182901, 172902, 182902. Each strut is nitrogen gas charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 2013 2014 2015 2016 2017 Nissan Altima 2.5L 3.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
  • Length ( hole center to hole center) :9-11/16''.
  • Travel:3-14/25'' ,Distance between ball mounts compressed:....
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....
Check Stock

[2 Pack] Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges 150N/33lb/15KG

  • HEAVY DUTY GAS STRUT: 150N/33lb /15KG (Per Strut), Total Length: 10.63 inch, Travel Length: 3.63 inch.
  • SOFT CLOSE HINGES: This lid hinge can stop your toy box lid or cabinet door from slamming down, protect your fingers from being pinched..
  • NO-RUSTY: Copper core piston and zinc-plating material keep gas strut away from rusting..
  • APPLICATIONS: This gas spring lift is suitable for window bench seat with storage box, toy box, windows, rv cabinets or kitchen cabinets and so on..
  • 1 YEAR QUALITY WARRANTY: SEN offers 1 year 100% satisfactory warranty. If there's a product quality issue or installation problems, please feel free....
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ...l camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install..
  • Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize ....
Check Stock

11Inch Gas Spring Prop Strut Shock Lift Support for RV Door Motorhome Door Compartment Door Cargo Door and other DIY Applications 500N

  • 【Premium Quality Making Material】 -This rv compartment door hydraulic hydraulic gas spring is made of precision steel pipe, which is flexible and....
  • 【Long Serving Life and Sturdy】 -This gas strut hood lift is strong and not easy to break, good performance in durability,a good replacement for....
  • 【Convenient To Install】 -Open the lid or door to the position you want.Take about 20% of the lid length as the upper installation point.
  • 【Detailed Specification】 -This gas spring Type: Gas Spring Center Distance: Approx. 280mm / 11in Stroke: Approx. 100mm / 3.9in Pressure: 100N,....
  • 【Wide Of Applicated】 -This gas spring is suitable for equipment flip lid, snack car flip door, advertising bar, light box, flip window and hood....
Check Stock

12 Inch 135lb/600N Adjustable Heavy-Duty Gas Shock Strut Spring for Tool Box RV Bed Cabinet Boat Cover Door Lid and Custom Projects Without Mount Bracket.

  • 【PRODUCT FEATURE】The 12in gas spring is PRESSURE-ADJUSTABLE. You can use the wrench included with the package to release the gas inside the gas....
  • 【PLACEMENT】Most used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper....
  • 【PARAMETER】Extended Length: 12IN(300mm).Maximum Pressure: 600 N/135Lbs Per Strut.Super Strong and stiff, you couldn't compress them by your hand!!....
  • 【ADJUSTMENT TIPS】 Only release the gas in one-second bursts to avoid releasing too much gas. Repeat the process until the gas strut is behaving as....
  • 【12+1 MONTH REPLACEMENT】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs..
Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

FASONLA GAS STRUTS, 300N/67LB FORCE EACH GAS STRUT LIFT SUPPORT, 15

  • POWERFUL STRUT: Your Gas Springs are powerful, prop open any medium to heavy object such as a car lid or barrier for hands free convenience, with easy fittings to any surface just attach, lift and your gas spring lifts and holds open any medium to heavy object. CAUTION anything under 65lb of weight should not be fitted with your gas springs, these powerful springs is difficult to be compressed by hand.Not Suitable for toy-chest or Windows..
  • SET OF 2 - 65 to 120 LBs TOTAL WEIGHT: Your gas springs come in a set of 2, able to hold open 65lb of weight each use individually on medium weighted objects or together for a combined hold strength of 120lb or more..
  • 15 TOTAL LENGTH: Each of your gas springs when fully extended is 15 in length and when fully compressed is 9 in length giving you the option to have 90-130 degrees of opening depending on the position of your gas springs..
  • EASY FIT & REMOVAL: Your gas springs come with 2 L-plates each at top and bottom with 4 screw holes and screws included, simply screw into any soft surface or pre drill a guide hole in any tough surfaces like wood, metals. The High quality materials included mean your screws can easily be fit and removed for any adjustments..
  • BRAND GUARANTEE: If you are looking for top quality Gas ....
Check Stock

C16-06389 108N/24Lbs 14 Inch Gas Struts Shocks Springs Lift Support for Camper Shell Truck Topper Rear Window Tool Box Lid 2pcs by IAQWE

  • [GAS SPRING PARAMETER]: Force: 24Lbs/108N 14 Inch per Strut, a pair of 2 shocks. Extended Length: 14”, Compressed Length: 8.8”. Very Strong! Can not compress directly by your hands..
  • [14 INCH GAS SHOCKS]: Exchange number: C16-06389, C1606389. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for you to choose..
  • [24LBs GAS STRUTS]: Suitable for Camper Shell Window, Trunk Topper Window, Tool Box, Toy Chest Box Lid and so on. Scope of application: 18-26lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!.
  • [PREMIUM 14 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support..
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock

OEMTOOLS 27036 10.75 Inch MacPherson Strut Spring Compressor, Set of 2 Universal Spring Compressor Tool Automotive, 9.75 Inch Maximum Safe Opening, Carrying Case Included

  • WIDE RANGE OF COMPATIBILITY: Compress most sizes of MacPherson strut springs with the OEMTOOLS strut spring compressor.
  • Quickly and safely compress the strut spring for easy replacement of the strut cartridge or strut assembly repair.
  • LOCKS INTO PLACE: Safer spring compression with broad spring contact and built-in detent pins.
  • Strut coil spring compressor tool makes changing front and rear struts safer and easier.
  • LONG LASTING: Strut compressor’s forged hooks and hardened center screw are designed to make this strut spring removal tool the longest lasting on the market.
  • OTHER FEATURES INCLUDE: MacPherson Spring Compressor features heat-treated forcing screw and safety latches for locking hook to spring.
  • These spring compressors are thoughtfully designed to be safe to use.
  • AUTOMOTIVE SUSPENSION TOOLS: MacPherson struts are the most important element of many modern suspension systems and should be replaced, on average, every 50,000 to 80,000 miles.
  • These automotive tools from OEM TOOLS get the job done.
  • Broad spring contact and built in detent pins help to lock the spring into place for safer spring compression.
  • Hooks are forged and the center screw is hardened for long life.
Check Stock

C16-20651 19 inch 40Lbs/178N Gas Shock Strut Spring for Leer are Snugtop Camper Shell Truck Topper Rear Window Pickup Cab Canopy Door Tool Box Lid, 2pcs from IAQWE

  • [GAS SPRING PARAMETER]: Force: 39Lbs 18.7 Inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 18.7”, Compressed Length( hole to hole): 10.82”. Very Strong! Can not compress directly by your hands..
  • [18.7 INCH GAS SHOCKS]: Exchange number: C16-20651, C1620651. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for you to choose..
  • [39LBs GAS STRUTS]: Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!.
  • [PREMIUM 18.7 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support..
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock