Sika Auto Glass Urethane Adhesive Sealant Primerless to Glass 2 Tubes P2G + 207 Primer Stick (10 Cartridges + 5 Primers)
- 10.5oz Cartridge P2G Urethane with Single Use Primer Sticks (1.4ml) - Comes with 1 nozzle per tube.
- 26-1 Thrust Caulk Gun or Better Required to Dispense this Product.
- Primerless to Glass Application, However Primer may be Required for Body Pinchweld if Scratched during removal or was repainted..
- Seller Highly Recommends Using a Certified Auto Glass Company to Safely use this Product is made in the USA.
- SIKA is a OE Urethane Adhesive product used in many auto manufactures.
Check Stock
3M Bumpon SJ5023 Black Bumper/Spacer Pad - Square Shaped Bumper - 0.81 in Width x 0.3 in Height - 67388 [PRICE is per PAD]
- 3M Bumpon SJ Series Self-Adhesive Bumpers are pressure sensitive adhesive-backed polyurethane products that can be used as feet, stops, spacers and protectors in many applications..
- The aggressive, high tack pressure sensitive adhesive is protected with a release liner making application fast and easy. The plasticizer-free urethane composition of the bumpons exhibits excellent skid resistance, long aging resiliency (will not crack or harden), abrasion resistance and resistance to marring and staining..
- Use 3M Bumpons almost anywhere slamming, scratching, nicking, scuffing, marring, sliding, vibration, or noise could be a problem for your product..
- Application Instructions: (1) Apply to any smooth, flat surface such as glass, metal, wood, smooth plaster, tile, etc. (2) Surfaces must be clean and dry. With a clean cloth, use a low strength solvent like isopropyl alcohol (rubbing alcohol) or heptane (white gas). (3) Do not attempt to use on fabric, course concrete walls, rough sand finishes, loose paint or rough wallpaper. (4) Remove paper liner. Avoid touching adhesive with fingers. Place bumper desired location and press firmly..
- Uses and Applications: Feet on the bottom of blenders, desk-top calculators, electronic cabinetry, telephones, keyboar....
Check Stock3M 08609 Window-Weld Super Fast Urethane Black Cartridge - 10.5 fl oz 2 Pack
- 3M 08609 Urethane Cartridge bonds replacement auto glass to car bodies.
- Thick bondline may allow some non-structural body panel applications.
- A medium viscosity single component moisture curing urethane adhesive.
- One-part urethane adhesive requires no mixing.
- Fast-curing formula offers a 10 to 20 minute working time.
Check Stock
MITREAPEL Autobond Super CA Glue (1.4 oz) with Spray Adhesive Activator (6.7 fl oz)-Auto Parts Cyanoacrylate Glue Great for Auto Modification Parts and Repairs, Fixing of Moving and Vibrating Parts
- ...seconds before bonding and finally bond the parts together. It Our auto parts glue will keep everything in its place!.
- Special Thicker Formula - Some two part super glues are thin and runny, making them complicated to use. Our CA glue features a medium to thick and viscous liquid making application much easier. This adhesive is usable for different needs on modification, repair, aftermarket, mechanical parts, accessories, interior & exterior and vibrating parts..
- Quickly Cures in Seconds - In just seconds, our super glue and accelerator spray will have a strong bond, and it dries clear. When used with the activator, the auto glue dries in 5-12 seconds while without the activator it takes just minutes. No more waiting for glue to dry!.
- Superior Bond Strength - This super glue is made for auto accessories and vibrating parts and will form a long lasting bond. From metal to plastic, glass to Perfect for almost any auto parts, this adhesive will form a strong bond that can’t be achieved with other products..
Check Stock
MITREAPEL Autobond Super CA Glue (1.4 oz) with Spray Adhesive Activator (6.7 fl oz)-Auto Parts Cyanoacrylate Glue Great for Auto Modification Parts and Repairs, Fixing of Moving and Vibrating Parts
- ...parts together. It Our auto parts glue will keep everything in its place!.
- Special Thicker Formula - Some two part super glues are thin and runny, making them complicated to use. Our CA glue features a medium to thick and viscous liquid making application much easier. This adhesive is usable for different needs on modification, repair, aftermarket, mechanical parts, accessories, interior & exterior and vibrating parts..
- Quickly Cures in Seconds - In just seconds, our super glue and accelerator spray will have a strong bond, and it dries clear. When used with the activator, the auto glue dries in 5-12 seconds while without the activator it takes just minutes. No more waiting for glue to dry!.
- Superior Bond Strength - This super glue is made for auto accessories and vibrating parts and will form a long lasting bond. From metal to plastic, glass to Perfect for almost any auto parts, this adhesive will form a strong bond that can’t be achieved with other products..
Check Stock3M(TM) Windo-Weld(TM) Super Fast Urethane, 08609, Black, 10.5 fl oz Cartridge, 12 per case
- 3M 08609 Urethane Cartridge bonds replacement auto glass to car bodies.
- Thick bondline may allow some non-structural body panel applications.
- A medium viscosity single component moisture curing urethane adhesive.
- One-part urethane adhesive requires no mixing.
- Fast-curing formula offers a 10 to 20 minute working time.
Check Stock
VHB 3M Dots Adhesive Double Coated Circle Pads, High Viscosity PE Mounting Tape, Converted from 3M 1600T Polyethylene Foam Tape, (Total 74 Pieces, 3 Sizes))
- Includes: 1 in circle (9 piece) + 0.75 in circle (16 piece) + 0.5in circle (49 piece) + 1 Tapknife + 2 razors.
- 3M 1600T Foam tape has good isolation and buffering. High cohesion, great holding power. Good weather resistance and aging resistance. A thick, double-sided PE foam tape, pressure sensitive adhesive, covering with release paper and plastic film.
- High adhesive, excellent performance for vibration and anti-crack. Apply to eliminating sound and reduce vibration packing for electric accessories and protection for glass board, etc. Good weather resistance, anti-chemicals..
- This product was made of PE foam,and double coated with acrylic adhesive. The PE foam tape was widely used in industrial and our daily use.Such as auto interior and exterior decoration,nameplate and photo frame mounting or house use hook..
- Apply for furniture, construction and flexible conjunction for decoration. Use it as an automobile foam tape for rough and even surface, sticking signboard, mirror, map etc., Also apply to reduce vibration packing for electrical accessories and protection for glass board, etc...
Check StockAuto Glass Urethane Adhesive, Sealant 2 Tubes SikaFlex P2G Plus
- 2 Tubes Sika P2G Plus Urethane Adhesive w/ Nozzles Power Caulk Gun Required to dispense this product.
- Professional Certified Use Product Seller Highly Recomends Using a Certified Auto Glass Installer to use this product. If attempting to install a windshield serious injury or can occur if product is not used properly.
- Quick Cure Adhesie Primerless to Glass only.
- If body of vehicle is not primed or if any area is scratched from glass removal then Sika 207 Body Primer is required see item# BAP-207Sika+.
- Note: Leave a thin skin of the original Urethane on the body when Trimming out original Urethane you do not want to damage the original paint surface.
Check Stock
20g Professional Auto Glue,Car Adhesive Great for Auto Modification Parts and Repairs,Repairing Broken or Fixing Moving Auto Parts
- ...nding properties, which can achieve tight bonding between the same material or between different materials in seconds,Save you more working time.This super glue is made for auto accessories and vibrating parts and will form a long lasting bond. From metal to plastic, glass to Perfect for almost any auto parts, this adhesive will form a strong bond that can’t be achieved with other products..
- 【Safe On Skin】You can apply the Universal Super Glue to the area in need of repair and spread it using your fingers without hurting them.environmentally friendly formula,and it will not stick to your hands..
- 【Auto essentials】super sticky, beautifully packaged, can be used as a car portable tool to meet various emergencies during the use of the car. When you are in emergencies such as flat tires, broken lights, loose parts, damaged parts,etc.you can always take out our glue for repair, making your journey perfect..
- 【What You Will Get】20 clear car glue and 24-hour friendly customer service, you can contact us at any time to bring you a high-quality shopping experience..
Check Stock
REDIAMANT A + + Car Molding Emblem Tape Automotive Double Sided Heavy Duty Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior
- ★ [17520 Hours Stick Test] ★ – Double sided automotive emblem tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. Higher grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless..
- ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Automotive bonding attachment heavy dutymounting two way tape for car vehicle truck deco, body trim emblem, side door trimming, windows louver, car badges and logos, car spoiler. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
- ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat r....
Check Stock
24mm Car Molding Emblem Tape Automotive Double Sided Heavy Duty by Rediamant Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior
- ★ [17520 Hours Stick Test] ★ – Double sided automotive emblem tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. Higher grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless..
- ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Other than automotive bonding attachment heavy dutymounting two way tape for car vehicle, truck deco, body trim, emblem, dashboard, windows, fender, sides mirror, nameplate, rim. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
- ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat r....
Check StockZep Heavy-Duty Citrus Degreaser - 3.5 Gallon 1 Pail ZUCIT3G - Concentrated Pro Formula
- RESTAURANT GRADE DEGREASER: Removes oil, grease, adhesive and kitchen soil.
- GREAT TO USE ON: Appliances, grills, stovetops, concrete, tools, engines, fiberglass, aluminum, stainless steel and kitchen surfaces.
- DO NOT USE ON: Glass, acrylic glass, plastics, auto paint, leather or natural stone surfaces.
- ZEP PRO TIP: Allow extra time for product to dissolve grease around cooking spaces and ovens as thicker buildup occurs here.
- THIS FORMULA CAN BE SHIPPED TO ALL 50 STATES!.
Check Stockexactafit 8211SR Passenger Side Mirror Signal Glass Replacement Right Door Rear View Lens Compatible With Toyota Sienna 2005 2006 2007 Diagonal 7-13/16 Inch
- COMPATIBLE WITH - 2005-2007 Toyota Sienna.
- MEASUREMENT - This Glass Measures 7-13/16" Diagonal. Also Pay Attention to the Shape of Your Mirror and Compare to the Image on Ad Shape..
- EASY INSTALLATION – Our Retail Box Has Step-By-Step Instructions to Make the Install as Simple as Possible..
- QUALITY – Exactafit Mirror Glass Replacements Are High Quality Glass Using Top of the Line CNC Machines. Our Specifications Meets or Exceeds OEM Specifications..
- PRODUCT INCLUDES - Exactafit Comes with the Mirror Glass, Adhesive Pads, and Install Instructions..
- NOTES - exactafit Mirrors Are Not Auto-dimming..
- SHIPPING - Same Day Handling For Orders Before 2:00 PM PST..
Check Stock
