Categories

Best Automated Machinery

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Cable Pulling Chain, Black Nylon Cable Pulling Chain, Flexible Nested Cable Pulling Chain with Less Noise for 3D Printer Parts, Engraving Machines,(S25 x 57 0.7M)

  • Top quality: Cable carrier made of high quality nylon 66 materials, low temperature resistant -25 , heat resistant 100 , strong and durable..
  • Widely used: cable pulling chain suitable for 3D printing, CNC machine tools, electronic equipment, fire fighting equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • Low noise: the surface of the drag chain is shiny and strong, which reduces the air tube drag and low noise, making the working environment quieter..
  • Exquisite workmanship: e-chain made of high-quality materials for thorough processing, greatly extends the product life cycle..
  • Convenient: The pull chain can be disassembled and connected at any length to meet the needs of work, easy to install and maintain..
Check Stock

GKEEMARS Industrial Signal Alarm Tower Lamp LTE-1101J AC 110V, LED Rotating Strobe Warning Light with Buzzer for Emergency (Yellow)

  • High intensity LED signal light with low power consumption, can be viewed easily at a distance.
  • Long lasting LED light-100000 hours lifespan, built-in buzzer-90db beep alarm, durable construction for long lasting use.
  • Each tier of lights can be switched to continuous or flashing light modes.
  • Rated IP54 against dust and moisture, NEMA 5.
  • These are Andon lights for use in factories or on industrial machinery. Typical uses are as Automated machinery status lights, operator signal lights, or as lean tower lights.
Check Stock

uxcell Drag Chain Cable Carrier Open Type with End Connectors R18 10x20mm 1 Meter Plastic for Electrical CNC Router Machines Black

  • Internal Size: 10mmx20mm (Inner HxInner W).
  • Change Size: You could link the cables with each other to form one long length you need..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection machines, robots, automated warehouses and so on..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
Check Stock

YJINGRUI LED Industrial Signal Tower Light 3 Colors Flash LED 180°Folding Light with Buzzer Alarm Warning Lamp for CNC Machines Red Yellow Green 100db (DC 24V)

  • LUBAN Industrial Signal Stack Tower Lights, adopting high performance LED chips as the light source to provide high brightness light with lower power consumption and at least 50,000 hours long lifespan.
  • This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, with a height adding pole, it's easily viewed at a distance in the workshop.
  • Each level equips 3x3 continuous light LED chips in 3 different directions, 90dB hi-frequency buzzer alarm optional for adding an audible warning to be heard above the noise of surrounding machinery.
  • Standard aluminium pole length 6 inches with L-bracket for mounting installation (When not using an L-bracket, make a fitting hole of φ18-20mm).
  • These Andon Lights for use in factories or on industrial machinery. Typically used as Automated machinery status indicator lights, operation signal lights, safety warning lights.
Check Stock

zdyCGTime 3.5mm AUX and USB Panel Flush Mount Cable USB & 3.5mm Audio Female to USB and 3 RCA Female Extension Mount, Dash Mount, Flush Mount Panel Mount Cable for Car Boat Motorcycle(3.5mm&USB, 1M)

  • Suitable for use in a reciprocating motion of the occasion, can be built-in cable, tubing, pipe,plumbing, . play traction and protection..
  • Each section towline can open, easy installation and maintenance. Exercise low noise, wear-resistant, high-speed movement..
  • The towline has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses..
  • The towline shape like tanks chain, composed by a large number of unit between the rotating freely link..
  • Within the same series of towline high, outside the high, the same pitch, towline in width, bend radius R may have a different choice..
Check Stock

LUBAN Led Signal Tower Stack Lights Industrial Signal Warning Lights Column Tower Lamp Andon Lights with Rotatable Base Steady/Flashing Light Switchable,12V 24V DC 3-Layer no Buzzer

  • High intensity LED signal light with low power consumption, can be viewed easily at a distance.
  • Long lasting LED light-100000 hours lifespan, built-in buzzer-90db beep alarm, durable construction for long lasting use.
  • Each tier of lights can be switched to continuous or flashing light modes.
  • Rated IP54 against dust and moisture, NEMA 5.
  • These are Andon lights for use in factories or on industrial machinery. Typical uses are as Automated machinery status lights, operator signal lights, or as lean tower lights.
Check Stock

Fielect Drag Chain Cable Carrier Open Type with End Connectors R100 35X100mm 1 Meter Plastic for Electrical CNC Router Machines Black 1Pcs

  • Internal Size:35mm x 100mm/1.37" X 3.9"(Inner H x Inner W).
  • 【Feature】- The appearance of this cable carrier chain is beautiful,and surface gloss.Reinforced nylon,low temperature resistance,wear resistance,corrosion resistance..
  • 【Change Size】- You could link the cables with each other to form one long length you need..
  • 【Application】- The drag chain has been widely used in CNC machine tools,electronic equipment,glass machinery,doors and windows machinery,injection molding machines,robots,automated warehouses and so on,play a traction and protection role..
  • 【Package Contents】- 1 x Cable Drag Chain..
Check Stock