Categories

Best Automatic Center Punches

General Tools Round Shank Center Punches #SPC74 Set of 5 from 1/16 in to 5/32 in.

  • POINTS: Points are ground to size for maximum strength and penetration..
  • DURABLE: Made from hardened and ground alloy tool steel, these durable punches are built for a lifetime of dependable use..
  • CLEARLY MARKED: Knurled bodies are stamped with size for quick identification..
  • UNLIKE AN AUTOMATIC CENTER PUNCH: These punches will not skip or bounce when struck, providing spot-on accuracy..
  • IDEAL FOR: Driving objects and nails or making a dimple in a work piece where you intend to drill a hole..
Check Stock

4 Pieces Automatic Center Punch 5 Inch Center Hole Punch Adjustable Spring Loaded Metal Drill Tool for Wood, Metal, Plastic with Cushion Cap and Adjustable Impact

  • Package includes: 1 piece blue punch, 1 piece gold punch, 1 piece silver punch, 1 piece silver plastic head punch and 1 piece gold plastic head punch, proper size, convenient to carry and easy to store, enough quantity can satisfy basic hand work needs.
  • Quality material: automatic center punches are made of high speed steel material, with brass shell casting and chromium plated tips, can hold up to strong impact, long lasting to use, resisting and rust proof to prolong the punch life, high speed steel hardness is HRC 58° - 60°.
  • Feature: the pocket automatic center punch body has deeply knurled finger grip to achieve easy handling and better control.
  • The non-pinch comfortable cap makes a good cushion for your palm against spring impact.
  • Easy to use: the 5 inch center punch has an adjustable tension, so you can use it easily with just one hand.
  • You can mark the center of the hole you want to make, and press the handle firmly, the strong spring will pop up the punch strongly.
  • After the punch is pressed back into the rod for a short time, it will leave a mark of the hole.
  • Wide applications: automatic center punch is multi-functional and can be applied in many occasions, suitable for positioning steel, aluminum, iron, PVC, steel, walls, wood, etc..
Check Stock

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Handed Spring Impact Chrome-Plated Shank and Premium S2 Steel Tip

  • DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners..
  • ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with..
  • QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool..
  • EASY ONE-HANDED USE: This one-handed automatic center punch needs only your hands—no hammer required. Use the S2 tip on a sturdy surface to center where you want the starter hole, and punch the tool downward to create the drill marker..
  • COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies..
Check Stock

PT06690 Point Only For 18A - One Piece Tip

  • Adjustable knurled cap regulates the force of the blow.
  • Internal mechanism automatically strikes a blow when downward pressure is applied.
  • Spring tension, which regulates the blow, is constant so marks made by the point are uniform in depth and size for each setting.
Check Stock

Starrett S117PC Center Punch Set, Set of 5 - 1/16\

  • PRE-DRILLING TOOL: Center Punches are tools used for making an indentation in an object.
  • This allows you to safely drill a hole at the same spot without slipping.
  • SET OF 5 - Includes a combo of our individual models, including 117AA with 1/16" D tapered point & 3" L, 117A 5/64" D tapered point & 4" L, 117B with 3/32" D tapered point & 4" L, 117C with 1/8" D tapered point & 4" L, 117D w/ 5/32" D tapered point & 4" L.
  • STEEL CONSTRUCTION: These center punches are made of hardened steel.
  • Its tempered head makes it less likely to fracture from a hard, off-center blow.
  • KNURLED GRIPS: Round shank is knurled for a sturdy grip and greater control.
  • As an added precaution, always wear safety goggles when using striking tools.
  • CARRY POUCH INCLUDED: This center pouch set comes with a convenient, red plastic, storage pouch case for keeping your center punches organized.
Check Stock

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

  • CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
  • COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
  • HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
  • EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
  • ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

DLJZGC 2 Pack Automatic Center Punch, 5 inch Heavy Duty Steel Spring Loaded Center Punch with Adjustable Impact, Center Hole Punch Tool for Metal Wood Glass Plastic, Two Replacement Tips Included

  • THE MARKING EXPERT: The center punch tool is designed to marking a highly visible spot as easy and precise as possible, and it makes you feel like an expert for marking with single handed operation..
  • ADJUSTABLE TENSION: The center punch tool is ingeniously designed to give increased or decreased striking force by turning the knurled cap, and enables you to gain uniform dimple size at every setting..
  • WIDE APPLICATION: Our 5-inch automatic center punch tool can help you make a small indentation to accurately spot the location of a hole in variable materials like wood, plastic, metal, glass, leather, and other machinable materials..
  • DURABLE AND STURDY: Our spring loaded center punch is made of hardened Cr-V steel that resists ultra high impact and provides anti-corrosion, wear resistance and strength to prolong the tool’s life, and two free spare tips are packaged in this set for even longer-term use..
  • WHAT WE GET: The punch set includes two kinds of colour 5-inch center punches, one is silver black and another is gold, and two spare replacement tips..
Check Stock

Amazon Basics 16-Piece Chrome Vanadium Steel Punch and Chisel Set with Storage Pouch

  • 16-piece woodworking punch and chisel set includes 3 cold chisels, 5 taper punches, 5 pin punches, 2 center punches, and 1 chisel punch gauge.
  • Heat treated, chrome vanadium (Cr-V) alloy steel construction.
  • Comfortable handles reduce hand strain and improve accuracy.
  • Storage pouch with velcro closure keeps tools organized and secured.
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

Stamp-n-Storage Lock-Down Punch Holder - Standard

  • Actual Size: 19” Wide x 13-1/4” High x 4-3/4" Deep | Standard Holder includes 40 compartments..
  • Space is provided for the different sizes of punches, from small to large. Compartments vary in size: the middle column is 4" Wide and the remaining are 3-1/4" Wide.
  • all rows are 1-1/2" High. Dividers can be removed for storing larger punches or other accessories (except for the center divider which is glued in place to improve product strength and stability)..
  • Spacer blocks are included to prevent the smaller punches from being pushed to the back of the opening. Eliminate guessing which punches you already have – you’ll always be able to see them.
  • Made of Birch Plywood - product will arrive pre-assembled, sanded smooth, and in it's natural wood color..
  • Crafted with care in Minnesota, USA. All Stamp-n-Storage products are designed to work great together as a system. With a common design and product sizing, you can mix and match a variety of items and create a custom storage and display solution for your space..
Check Stock

Nile Products 4500PP Calculating Time Clock, Small Business Punch Pak, up to 50 Employees, Includes 25 Time Cards, 1 Ink Ribbon and 2 Security Keys

  • Bundle includes Nile Products 4500PP Calculating Time Clock, 25 time cards, one ink ribbon and two security keys.
  • Prints date, month, in and out punch times, total time between punches, cumulative time and daily overtime.
  • Automatic time card feed aligns punches, automatically calculates worked time between punches, and totals cumulative worked hours per pay period for up to 50 employees.
  • Only use authorized Nile Products replacement ribbons (4500PPRIB) and time cards (4500PP10).
Check Stock

JIAN BOLAND Time Clocks for Employees Small Business, with Face , Finger Scan, and PIN Punching,Employee Management Time Clock-Automatically Count Working Hours- No Monthly Fee

  • ⏲JIAN BOLAND Punch clock adopts thermal printing technology, no need to replace the ribbon, no equipment maintenance, clear print retention time longer, save money.
  • ⏲Two-sided time card records up to three IN/OUT print cycles per day.
  • Calculates overtime, rounds punch times, and deducts lunches and breaks directly on time cards. Easily track your employees' start times, break times, lunch times, and finish times..
  • ⏲Automatic card feed aligns punches precisely to track weekly, biweekly, semimonthly, and monthly pay periods,Identify late employees with punches marked in 【】.
  • ⏲The time clock is a backlit LCD display.
  • Automatic adjustment of DST & switchable 12H/24H.
  • the automatic feed and alignment feature for accurate punching every time..
  • ⏲Package includes：Thermal Time Clock, 50pcs time card, UL certified power supply, 2 keys, screw accessories package, user manual.
  • it is very suitable for small and medium enterprises, and we provide you with 24 hours professional service support.
Check Stock