Best Automatic Injection Moulding Machinery
Tie Down Engineering Dock Hardware - Angle Brackets/Clip
- The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
- Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
- Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
- Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
- Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check StockSIMPSON Cleaning 88282 Heavy Duty Cleaner Concentrated Soap Solution for Pressure Washers and Spray Bottles Use on Concrete Vinyl Siding Appliances Windows Cars Fences Decks Purple 1 Gallon
- Heavy Duty Cleaner: Formulated to be used on industrial sites, commercial equipment, construction machinery, fleet vehicles and more.
- Non-butyl degreaser quickly cuts through tough oil and grease.
- Eliminates the need to use several other products to get the cleaning job done.
- Versatile Cleaner: Can be used in equipment such as pressure washers, automatic scrubbers, and steam cleaners.
- or use it for manual applications by spraying, mopping and wiping.
- Highly Concentrated: Use directly from the bottle or effective at dilutions as great as half-ounce per gallon of water.
- providing up to 256 gallons of cleaning solution per bottle.
- Safe to Use: Use with pressure washers, directly on surface or with soap injection. Always consult your machine’s owner’s manual for specific instructions regarding use of detergent.
- Can be sprayed, mopped, wiped, used in pressure washers, steam cleaners, and automatic scrubbers..
Check StockSemi Automatic Blow Molding Machine - NOVO PET Bottle Stretch Blowing Moulding Machines for jar, auto Plastic Cavity Blower Equipment for Small Mineral Water Bottles with Different Liter Gallon
- High Adjustability: Semi automatic blow molding machine enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus..
- Strong Force: Semi auto blow moulding machine clamping with high pressure and double crank links to lock the mold..
- High Safeties: PET blowing machine with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure..
- Low Cost: Semi auto blow moulding machine is designed with high efficiency, easy operation, easy maintenance, etc, with automatic technological process..
- Low Rejection: Semi automatic PET Stretch blower is high adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. Rate less than 0.2 percent.
Check Stockuxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC
- External Size: 20x38mm(0.787x1.496 inch).
- Change Size: You could link the cables with each other to form one long length you need..
- Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stockuxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC
- Internal Size: 10x20mm(0.394x0.787 inch).
- Change Size: You could link the cables with each other to form one long length you need..
- Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock2Pcs Drag Towing Chain Flexible Drag Chain Cable for Numerical Control Electronic Equipment Stone Machinery
- Premium Quality: The drag chain can be coordinated with the moving parts of the machine tool machinery and equipment, which can exert safety protection and guidance capabilities, extend the service life of the protected cables, oil pipes, and air pipes, and reduce consumption..
- Widely Applications: Widely used in CNC machine tools, three‑dimensional printers, electronic equipment, stone machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, processing centers, automated machinery and equipment, etc..
- Advantages: Can improve cables and tubing. Professional manufacturing, stable performance and high reliability, which has passed strict quality control, you can use it with confidence..
- Product Brief: The messy distribution of trachea, neatly and regularly arranged together, can increase the overall artistic modeling effect of machine tool machinery and equipment..
- Item type: Drag Chain, Material: Nylon, Color: As picture shown, Inner diameter: Approx. 10x10mm/0.4x0.4in, Rotation radius: Approx. 28mm/1.1in, Weight: Approx. 426g..
Check Stockuxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole
- External Size: 20x23mm(0.787x0.906 inch).
- Change Size: You could link the cables with each other to form one long length you need..
- Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check StockRCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish
- EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
- FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
- APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
- FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stockuxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC
- Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
- External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
- Change Size: You could link the cables with each other to form one long length you need..
- Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stockuxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC
- Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
- External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
- Change Size: You could link the cables with each other to form one long length you need..
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check StockPlastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines
- External Size: 23x28mm(OuterH*OuterW);Bending radius: R38.
- Change Size: You could link the cables with each other to form one long length you need..
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
- NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check StockBefenybay 8PCS Black Corner Bracket Cube (20x20x20mm) for 6mm Slot Aluminum Extrusion Profile 2020 Series (Cube Corner-8PCS)
- The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
- Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
- Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
- Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
- Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check StockNEW 6PC New Compatible For Jeep Wrangler TJ 6
- Made of high quality polypropylene with paintable smooth finished.
- High quality injection moulding fender flares with smooth and precise edge cutting finish.
- Give your truck an instant rugged off-road look/ aggressive.
Check Stock