Categories

Best Automatic Lathe Machining

Industrial Service Solutions Aftermarket Gardner Denver Aeon 4000 (1 Gal.) Compressor Oil | 1 Gallon | Replacement Lubricant | for Compressed Air Equipment and Systems

  • Mobil met 766 is used for tapping, threading, milling, gear shaving and shaping, broaching, planning, parting-off and automatic lathe operations.
  • Increased production resulting from longer tool life and reduced downtime for tool changes.
  • Improved surface finish, closer tolerances and reduced formation of built-up edge resulting in fewer rejects.
  • Cooler work pieces and increased feed rates possible for reduced operating costs.
  • Suitability for a wide range of severe machining operations on difficult steels.
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Ultimate Swift Programming - Training DVD

  • ALL NEW USER INTERFACE - In 2017 a new user interface has been introduced to mastercam. This DVD will help you get started with mastercam learning all the basic features, tool manager, sheet setup and much more..
  • 1280x720 HD QUALITY - We concentrate on bringing the highest video/audio quality to make sure you concentrate on the lessons and can easily follow along lessons.
  • MILL, LATHE & SOLIDS - DVD will cover one exercises of milling, lathe and solids to get you started understanding mastercam best (Pre-Requisite to 2D Mill & Lathe).
  • EXERCISE FILES AND HOME LEARNING EDITION - DVD includes all the Exercise Files (both solidworks and mastercam files) and drawings in pdf format. Also Included is the Home Learning Edition so you can practice from home.
  • 15+ YEARS OF EXPERIENCE - The Instructor has over 15 Years of experience in machining and programming as well as tooling which he uses very effectively to explain why using certain tools and features is best in certain situations (Real World Training).
Check Stock

uxcell Thread Milling Threading Tap M10 x 0.5, Metric Left Hand Machine HSS (High Speed Steel) Uncoated 3 Straight Flutes Screw Tap H2 Tolerance

  • IMPORTED TECHNOLOGY: Imported High Precision Grinder, The Whole Is Ground And Formed at One Time, The Concentricity Is High, The Rigidity of The Tap Is Increased, and It Is Not Easy To Break..
  • SELECTED MATERIAL: Overall HSS Imported Steel, Combined with Abrasion Resistance and Hardness, a Wide Range of Processing, One Piece Worth Multiple Pieces..
  • OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability of The Equipment..
  • APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/CNC Machining Center/Automatic Lathe/Milling Machine, Etc..
  • APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A10 Steel And other Metals..
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

Machine Tap 4-40 UNC Thread Pitch 3 Flutes High Speed Steel Thread Forming Pointed Tap Right Hand Uncoated Bright Finish Round Shank with Square End Plug Chamfer HSS Machine Screw Plug Tap

  • IMPORTED TECHNOLOGY: Imported High Precision Grinder, The Whole Is Ground And Formed at One Time, The Concentricity Is High, The Rigidity of The Tap Is Increased, and It Is Not Easy To Break..
  • SELECTED MATERIAL: Overall HSS Imported Steel, Combined with Abrasion Resistance and Hardness, a Wide Range of Processing, One Piece Worth Multiple Pieces..
  • OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability of The Equipment..
  • APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/CNC Machining Center/Automatic Lathe/Milling Machine, Etc..
  • APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A4 Steel And other Metals..
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • ...he 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machine..
Check Stock

Mastercam 2017-2020 LATHE & C-Y AXIS Video Tutorial HD DVD

  • 1280x720 HD QUALITY - We concentrate on bringing the highest video/audio quality to make sure you concentrate on the lessons and can easily follow along lessons.
  • 101 VIDEOS / 9.5 HOURS - You will walk thru 7 exercises for a total of 101 videos that add up to 9.5 hours of training. With practice you can complete your training in 2-3 days and can easily start programming your first day.
  • EXERCISE FILES AND HOME LEARNING EDITION - DVD includes all the Exercise Files (both solidworks and mastercam files) and drawings in pdf format. Also Included is the Home Learning Edition so you can practice from home.
  • 7 TOTAL EXERCISES - There is 5 Lathe exercises and 2 C-Y axis exercises (This covers all the Lathe & C-Y Axis Features).
  • 15+ YEARS OF EXPERIENCE - The Instructor has over 15 Years of experience in machining and programming as well as tooling which he uses very effectively to explain why using certain tools and features is best in certain situations (Real World Training).
Check Stock

Benchmark Fluids Sawlution II 5 gals Synthetic Grinding and Sawing Coolant 5 gal Carboy

  • Concentrated synthetic cutting and grinding fluid with 2.0 Refractive Index.
  • Suitable for ferrous and non-ferrous metals.
  • Used in Band Saws, mills, lathe and machining centers.
Check Stock