ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

HITBOX MIG Welder 200Amp – 110V 2 in 1 Gasless Flux Core Welder ARC/MMA Welding Machine with IGBT Inverter, Portable Automatic Wire Feed Welders No Gas-HBM200

  • Powerful machine :Up to 200Amp output allows you to weld mild steel up to 5/32” in the plate. Suitable for 0.30” & .035” flux core wire. Automatic change of the voltage & wire feeding speed by adjusting the amperage.
  • Multi-Process:Gasless MIG/Stick 2 -in-1 Welder.ARC mode fits rods: E7018, E6013, E6011.
  • Advanced IGBT&Inverter & 60% High duty cycle ensures long time operation.Closed loop feedback control, constant voltage output, workable under mains voltage fluctuation within ±10%.
  • Adjustable welding voltage and current, excellent welding performance. Adopting unique welding dynamic characteristic control circuit in Gasless, stable arc, little spatter, beautiful weld bead, high efficiency.
  • Automatic compensation for voltage fluctuation, over current protection, over load protection.Perfect for Home DIY and Repair, Maintenance, Metal Fabrication, farm & road equipment.
Check Stock

ETOSHA 140Amp MIG Welder, Flux Core Welder AC 110V Gasless Welding Machine with IGBT Inverter, Automatic Wire Feed Welders Portable Metal Welder No Gas 110 Voltage 140A Compact Welder with Welding Gun

  • Easy to Use: This welder features an automatic adjustment function, which is no need to match working voltage and feeder speed separately. With thickness adjustment knob to suit your different applications. Even beginners will find it simple to use..
  • High Efficiency: The welding machine uses 0.030/0.035in flux core wire. Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate. Big enough to handle 2.2 pound rolls of wire..
  • Safety Protection: MIG 140A IGBT Inverter welder, reliable and stable. Steel welder machine with electric choke control, less spattering, deep penetration and good formation. Automatic thermal safety protection, overload safety protection keep you safe..
  • Wide Applications: Lightweight 14.77lbs. The ergonomic handle design makes the welder machine very easy to carry. It is very suitable for Home DIY and Repair, Maintenance, Metal Fabrication, farm & road equipment..
  • Package Includes: MIG-140 Welder machine.
Check Stock

Welding Machine 28KHz TBVECHI Handheld Ultrasonic Spot Welder Plastic Welding Machine Portable for ABS/PP/PE

  • ...dy, make the plastic joint face sharp friction melt, caused the plastic body joint surface between "plastic flow of material, instantaneous agglutination process..
  • 【Features】Novel portable structure design, quick and convenient operation and movement. Handgrip operation, flexible and practical, simple operation. Automatic tracking system, no manual tuning frequency automatic tracking frequency..
  • 【Useful】Unique appearance design, all-steel shell, all-aluminum heat dissipation, thin film panel, plastic spraying treatment. Time setting, overload alarm, frequency deviation alarm, frequency current display LCD display at a glance. Strong power, up to 700W, can be continuous or pulse work, in particular, suitable for 1-15mm melting point is used..
  • 【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your buy, we will provide a money-back guarantee..
Check Stock

ARC Stick Welder 200Amp 110V Welding Machine, Mini Welder Machine Beginners Welder With Display LCD Use Welding Rod Tools

  • ...ing machine with a high -performance fan has a strong heat dissipation to keep it cool. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current.
  • ☢【Safe and Stable Welding Machine 110v】Arc welder machine adopts automatic compensation for fluctuation, under-voltage protection, over-voltage protection, over current protection, and no electromagnetic noise mechanism that enables safe operation. Start arc easily, stable welding arc,optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
  • ☢【Light Duty Welding Machine】Mini welder machine But Big Power. This 110v arc welder features an easy carrying handle, portable carry with adjustable shoulder strap, compact light-weight design, it is convenient for welding indoors and outdoors. So you can work smarter not harder by bringing the welder to the work, the welder machine can be used anywhere you need.
  • ☢【Easy to Use】1 x 110V ARC Welding Machine, 1 x Stick Welding Rod Electrode Holder, 1 x Arc Welding Ground Clamp, 1 x Welding Mask, 1 x Brush, 1 x Shoulder Strap, 1 x....
Check Stock

Auto Darkening Welding Helmet, Solar Powered Auto Darkening Electric welder's helmet, Welding Mask, Welding Hood for TIG MIG ARC Adjustable Shade 9-13 Welder Mask

  • ...r: The welding hood use PP materials, the product is soft and comfortable to wear. The flip welding mask adjustable head increases comfort, sufficient internal space increases air permeability and avoids stuffiness, perfectly suit to your head shape..
  • Effective Eye Protection: The auto-darkening filter switches from automatic darkening time of less than 1/10000 seconds to protect your eyes, no need for manual and more secure.The diffusion of light, the change of light transmittance and the angle dependence enable the welder to see clearly from different angles..
  • Fatigue-Free Comfortable Welders Mask: Blocked protective welding hood with a great viewing area, reducing the lime green tint, like looking through the clear window glass. The auto shade welding hood can be applied to automotive, construction, metal production, and fabrication, military maintenance, repair and operation (MRO), industrial, etc. Light weight is suitable for a long time working..
  • Versatility: Welding helmet dark shade is DIN9-13. A great personal protection equipment designed for industrial use that can handle multiple processes of Plasma cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding..
Check Stock

Mini Welding Machine 110V Plug, 250A Stick MMA Welder Machine IGBT Digital Smart VRD Hot Start with Wire、Tongs, Ground Wire, Clip, Mask and Gloves.fits Below 3.2mm Welding rods

  • ...018 E6013 of 1/16"-1/8"(1.6mm-3.2mm), and E40 series electrodes。.
  • The Miuezuth MINI arc welding kit has multiple protection mechanisms to improve the safety factor, the insulation protection level is "F", and the enclosure protection level is "IP21", which can ensure your safe use. With overheating and overcurrent automatic protection. This small welder is very easy to use, even a novice can use it..
  • The Miuezuth welding machine adopts the most advanced IGBT technology, the efficiency reaches 85%, and the power factor is 0.93. The miniature welding equipment reduces the loss of copper and iron, which is very energy-saving, the energy optimization effect is remarkable, and the welding efficiency is significantly improved..
  • The Miuezuth ARC Portable Welder features an easy-to-carry carrying strap, compact and lightweight body, and a colorful hard carton packaging for easy storage and portability. Whether you work indoors or out, this welding machine is your go-to welding tool..
  • Every Miuezuth IGBT rod stick welder machine is inspected before leaving the factory to ensure that it meets the high standards we set. Every semiconductor, accessory, cable, electronic board, and spare part has been thoroughly inspected..
Check Stock

SEEKONE Plastic Welder, Upgraded Version 100w Hot Stapler Machine Car Bumper Repair Kit with Plier Knife Flat Outside Corner Inside Corner Wave Staples for repair and reinforcement plastic products

  • ...eld into the plastics quick and easily. Strong for shock and twist after repairing..
  • 【Powerful Functions】This welding repair tool set has a maximum power of 100W. Heat and cooling is faster, more eficient and more energy eficient than general welding machines. Has a safety overheating protection function. Ensure equipment safety and prevent fires..
  • 【Humanized Design】Our plastic welding machine bumper repair kit adopts LED light design, which is convenient for dark working environment. The rubber handle feels comfortable and will not feel fatigued when held for a long time. Quick and easy operation..
  • 【Widely Used】This plastic welding machine can repair most modern products made of plastic. It is suitable for the repair and reinforcement of automotive plastic parts, such as bumpers, dashboards, lamp holders, radiators, handles, headlights, plastic fins, and motorcycle plastic devices..
  • 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you..
Check Stock

Welding Blanket heavy duty 4x6 ft 850GSM Thick 24 Sq Ft High Temp Welding Blanket Fireproof Soldering Blanket Welding Floor Blanket Welder blanket Welding Blankets Fire Blankets for Welding Fiberglass

  • ...lar stitched fine edge, highly pliable. Soldering blanket has tight weaving pattern, 30 x 30 per inch² to keep it bound together and reduce wear and tear for ultimate durability..
  • [EASY TO USE] 1 grommet (0.43" diameter) on each edge. Easy to hang small welding blanket heavy duty as curtain if needed. OR drape over equipment or floor as a protective curtain to shield from ember, sparks, fire, or heat from welding equipment. Use LEBERNA high temp welding blanket for insulation in industrial or home projects. Welder blanket welding tarp shields against grill or smoker heat, fireplace & grinding debris. It is light weight foldable and shields barbeque bbq equipment..
  • [SAFE THERMAL PROTECTION] Fire retardant blankets have high thermal protection capability and withstands working temperatures up to 1,022℉ (550℃). Fire retardant blanket is ideal for MIG, TIG, and other welding application. Fire retardant mat is highly effective in protecting welders, equipment and other materials. Our solder shield heat resistant mat is a nice addition to welding equipment. Fire retardant insulation fiberglass blanket is ready for long-term, repeated use. canvas welding curtain.
  • [GREAT TO HELP MAINTAIN TEMPERATURE] Flame retardant welding blanket comes with the effect of....
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

Spot Welder Seesii Farad Capacitor Battery Spot Welder 3000F 120 Gears Adjustable Capacitor Energy Storage Portable Spot Welder Support 0.1-0.3mm Nickel Strip Spot Welding for Battery Pack Making

  • ✅【High Quality Spot Welder】:This spot welder is powered by two imported Farad capacitors,controlled by high-performance MCU,and supports functions such as automatic working mode,output power adjustment, delay setting, circuit board temperature monitoring and high temperature reminder. Compared to a traditional ac spot welder, it does not interfere with the electric circuit, which means no more tripping problems. It is designed for professional workers and DIY enthusiasts..
  • ✅ 【120 Levels Adjustable】: Our spot welder equipment with 120 gears output power adjustable, which can be adjusted conveniently by rotating the button(0-120 range).You can adjust the spot welding accuracy according to different needs, the more accurate the adjustment, the more perfect the spot welding effect..
  • ✅ 【Enhanced 0.1-0.3mm Battery Spot Welder】:The SE202 battery spot welder is equipped with two super capacitance, can easily weld 0.1-0.3mm thick nickel sheets, you can finish the welding work easily and efficiently, the welding spot is nice and elegant. Can be used for spot welding of batteries, hardware, and electronic components..
  • ✅ 【Unique & Innovative Design】: Different from other handheld spot welder on the market, our newly designed machine wil....
Check Stock

Solar Auto Darkening Welding Goggles Welder Glasses Safety Protective Welder Mask Helmet with Adjustable Shade Eyes Goggles Mask Anti-Flog Anti-glare Goggles-Black

  • 【More Safe For Eyes】- This solar auto darkening welding goggle is made of high quality PC + ABS material, sturdy and durable to use.
  • 【Automatic Darkening Welding Goggles】- Solar auto darkening welding goggles automatically changes from a light state to a dark state when an arc....
  • 【Comfortable To Wear】- The welding goggles with adjustable shade are designed to protect the eyes from sparks, and harmful radiation under normal....
  • 【Convenient & Safety to Use and Adjustable】- Goggles frames can be adjustable.
  • mirror legs can adjust the length, automatic variable light lenses....
  • 【Wide Application & Portable】- Applicable to gas welding, steel welding, cutting, welding and so on.
  • if you have any problem or good ideas, please....
Check Stock

Baomain Micro Switch V-162-1C25 SPDT 3P Short Straight Hinge Lever Momentary Pack of 5

  • Attention Please: Contact: 1 NO (1normally Open).
  • Voltage/current: 16A 250VAC/125VAC T125 5E4. Type: 1NO contact switches, 2Pins, long life, high reliability.
  • Widely used in: appliance, electronic equipment, automatic machine, communication equipment, car electric, apparatus and instrument, electric motion tools etc.
  • Fit to: Microwave oven, welding gun, induction cooker, game machine, washing machine,electric cooker,electric kettle, household appliances,etc.
  • Safe and reliable basic switch, nice appearance, tight configuration, small contact clearance, quick action, high sensitivity and small operating travel.
Check Stock