Categories

Best Automatic Steel Bar Bender

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

  • Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
  • Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
  • Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
  • Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
  • Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

  • 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
  • Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

KAKA Industrial Metal Bender, Sturdy and Versatile Compact Metal (YP-9)

  • LIGHT WEIGHT AND PORTABLE BENDER. This bender is light weight and portable.
  • at the same time, it is sturdy. It can be mounted on work trucks, tractors, or any concrete floor.
  • SEVEN DIES ARE INCLUDED. There are 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field.
  • GREAT CAPACITY. The telescoping handle bends round or square bar stock up to 5/8" thick with a maximum width up to 1-15/16".
  • LONG HANDLE ALLOWS BETTER LEVERAGE. The 44-Inch telescoping handle guarantees the better leverage. Pre-drilled holes are designed for easy mounting to bench or table.
  • COMPACT DESIGN ALLOWS VERSATILITY. This compact metal bender is capable of making different bends on flat, square as well as solid round stock.
Check Stock

Mophorn Pipe Tube Bender 3/8 to 1 Manual Tube Bender with 7 Dies Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • 3/8"-1" Bending Range: The bender can easily and smoothly bend less than 0.08 inch/2 mm thickness iron pipe. And the tool is suitable for....
  • 7 Superior Steel Dies: We provide 7 tube bender dies, size ranging 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1". The bending formers can meet different....
  • Carbon Steel Material: Made of strong steel material, our bending tool performs well in bending hard materials. High strength steel aims for a long....
  • Compact & Portable Design: Compact design allows easy carrying, lightweight but gives enough bending force. The metal bender adopts a long handle with....
  • Universal Usage: A multifunctional steel bender machine is suitable for grids, gates, balcony railing, patio furniture, and steel materials. Widely....
Check Stock

LORESO Tube Bender Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4 5/16 3/8 Tubing Bending Tools- Manual Tubing Bender for Copper Brass Aluminum and Thin Steel Pipes

  • MANUAL TUBING AND PIPE BENDER – manufactured with high-quality, heavy duty steel, this tube bender will efficiently bend copper, brass, aluminum and....
  • VERSATILE PIPE BENDER FOR ALL INDUSTRIES – this copper pipe bender is suitable for use on construction sites, plumbing jobs, shipping,....
  • EASY TO OPERATE – the Loreso manual pipe bender is easy to operate and portable so you can take it from site to site. Made with high precision and....
  • VARIOUS DEGREES AVAILABLE – simply adjust the metal bender according to the angle you require from 0-180 degrees. This pipe bender is a 3 in 1 tool....
  • STURDY CAST IRON FRAME – our copper tube bender is made from strong, durable cast iron and can be mounted on either a bench or frame – the safest....
Check Stock