Categories

Best Automatic Sump Pump

VEVOR 1.5 HP Submersible Cast Iron and Steel Sump Pump, 6000 GPH Submersible Water Pump with Integrated Vertical Float Switch, for Basement Water Basin and Flooding Area

  • ...fication, so there is no need to worry about the quality..
  • Hands-free Operation: Wouldn't you prefer to sit from the comfort of your couch and let your pump do its job? Well, now you can! Thanks to the vertical float switch, our heavy-duty sump pump will start working automatically when the water level rises above 8.7" and stop working when the water level is below 4.7". It is designed for energy-saving and labor-saving use in draining applications. Relax and let your pump drain your worries away..
  • Designed Just for You: The water outlet diameter is 1-1/2" NPT, and a 1-1/4" NPT adaptor is provided for different sizes of hoses, more convenient and cost-effective. Our automatic sump pump is equipped with a 10 ft power cord, long enough for a hassle-free connection. Besides, the ergonomic handle makes it portable. Adapt to any situation with ease..
  • Assemble with Ease: You will be ready to operate your pump in just three simple steps. Connect the water hose. Then, put it in the pit, plug it, and work! This sump pump with a float switch is suitable for a sump pit larger than 14"(H) x 10"(Dia.).....
Check Stock

Liberty Pumps CSP-237 Pump one-size Gray

  • 16.5" x 15" poly sump pit (perforated) and poly cover.
  • Automatic sump pump, 115 V, with 10' power cord.
  • 24' flexible hose kit, polyethylene 1-1/4" (Model DHK-24).
  • Check valve threads directly into pump discharge.
Check Stock

Honda Power Equipment WSP73 3/4 HP 115V Submersible Water Pump, 50FT Cord New

  • 【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
  • 【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
  • Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
  • 【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
  • 【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
  • 【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....
Check Stock

Submersible Clean/Dirty Water Sump Pump 1.5HP w/water level sensor (4 ON/OFF positions, no external float switch) 4860GPH, 26'Head, Thermal Protector, Stainless Steel, Copper Winding - Schraiberpump

  • Dirty water sump pump. With High Flow . This submersible water pump.
  • is sometimes referred to as a sub pump, utility pump, aquatic pump, pool suction pump, or sump pump. Is typically used in a basin which is in your basement, garage, garden, or yard. It will automatically turn on and off when there is water. That is literally the whole point. This High Flow auto sump pump does not have an attachment for a Garden Hose. Typically these are permanently or semi-permanently installed. So you wouldn't want to waste your garden hose..
  • New water sensor technology replaces old float switch systems making it fully automatic..
  • 4 adjustable start and stop positions for the sensor, when the sensor gets wet it starts the pump, when it gets dry it stops it..
  • High quality stainless steel casing. Pumps Starts Automatically between 7.5 & 11 inches..
  • 2 year warranty with us directly. See Manual for our phone number - Premium Pumps USA.
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock

Little Giant Select Series LG-S50T 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Tethered Switch, Blue, 14942675

  • APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
  • AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
  • piggy-back design allows switch to be overridden for emergency water removal or testing.
  • BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
  • also features a carbon/ceramic shaft seal.
  • ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
  • PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
  • 5.5 inches x 8.0 inches x 10.5 inches high.
Check Stock

Little Giant 506160 6-CIA-ML 1/3 HP 2760 GPH 115-Volt Low Level Sump Pump, Blue

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch..
Check Stock

DIGITEN Auto Top Off System, Smart ato System, Fish Tank Sump Water Filler Refiller, Automatic ATO System for Aquarium with Pump

  • 【Simple, Complete, Smart Automatic Top Off System】 aquarium automatic water supply system, super easy installation and maintenance. Suitable for aquariums up to 5/8"(16mm) thick, durable PC material holder to prevent move, adjustable bracket on holder make different water levels possible..
  • 【Relay Control】 precise dual float water level sensor for overfilling protection. When the water goes below the minimum water level , the power will be activated, the pump automatically works, and cut off once the water level reach to maximum. The second float ball will work when the first float ball fails..
  • 【Siphon Break】 The siphon break is optional installation part. It is recommended that the water level of display tank be higher than the reservoir, and DON’T leave the end of the water supply pipe in the water, otherwise, it will siphon after the pump shuts off, if so the siphon break must be installed at the end of the water supply pipe..
  • 【Plug-and-Play with all parts included】 Everything you need is included, it will also come with a pump and a ETL listed power adapter. Safely keep sump water levels stable, no....
Check Stock

PumpSpy Silent Sump Pump Check Valve - 1-1/2 with Buna-N Couplings Model CV-150 Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Expectancy Increase Includes Steel Clamps Fit 1-1/2″ Pipe

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working pr....
Check Stock

DEKO Sump Pump 1HP 3698GPH 750W Submersible Water Pump with Float Switch and Max Flow 14000L/H for Swimming Pool, Tub, and Garden Irrigation and Long 16ft Cable

  • ...le water pump easily passes solids up to 35mm in diameter..
  • 【MULTI OUTLET SIZE】：With multiple hose and threaded pipe connection sizes including 1", 1-1/4, G1" and G1-1/2", you can choose according to the flow rate, and can use clamps or hose threads to set the drain hose, suitable for many different scenes..
  • 【AUTOMATIC FLOAT SWITCH】：The sump pump is equipped with a sensitive automatic float switch, which can sense the position of the water level line, and the switch can automatically start/stop. Once the water level reaches the specified value, the pump will automatically stop to avoid idling..
  • 【SAFE AND DURABLE】：Electric water pump is made of high-quality thermoplastic composite material, which has the characteristics of corrosion resistance, acid and alkali resistance, and waterproof, sure its the service of products from details . Built-in overheat protection ensures that the pump will not be burned out..
  • 【LIGHTWEIGHT AND PORTABLE】：The water pump is easy to assemble, and the hose can be discharged by clamps or hose threads.
  • the weight is only 3.7kg, easy to carry, resists corrosion, suitable for use in the courtyard, pond, garden, swimming pool..
Check Stock

PumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T

  • WIDELY COMPATIBLE: Our sump pump check valve threads directly into a pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. Works with any pump containing a 1-1/2" NPT discharge..
  • UNIQUE SPRING-LOADED FLAPPER: The unique spring-loaded flapper on our sump pump check valve eliminates the water hammer noise of standard check valves for silent operation. No more sudden noises that disrupt your lifestyle or sleep. With this check valve, water hammer noise will be a nuisance of the past!.
  • 100% STAINLESS STEEL HOSE CLAMPS: Our sump pump check valve threads directly into the pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. With durable ABS construction, you can have a system that'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
  • PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our ....
Check Stock

Little Giant CS-SS 115-Volt 1/3 HP 3000 GPH Pre-Packaged Automatic Crawl Space Sump System with 20-Ft Cord Blue/Black 14940655

  • APPLICATIONS: designed for use in residential low-lying areas such as crawl spaces or shallow sump pits.
  • can also be used to prevent standing water in....
  • COMPLETE READY-TO-ASSEMBLE SYSTEM: includes an automatic 1/3 HP cast iron sump pump, 18-inch x 22-inch perforated polypropylene basin and structural....
  • AUTOMATIC OPERATION: includes a Little Giant 6EC-CIA-SFS pump with snap-action float switch.
  • activates when water reaches between 8 and 11 inches.
  • MOTOR SPECIFICATIONS: 1/3 HP, 115 Volt, 6 running Amps, 600 Watts, overload protection, 20-ft. cord with 3-prong plug.
  • check valve and 24-ft. universal discharge hose kit with 1.25-inch and....
Check Stock