Categories

Best Automatic Tube Cutting

PVC Cutter 2-1/2\

  • 【WIDELY USED】: Can be used for PP-R pipes, PVC pipes, PE pipes, etc. Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）Ideal for Home Working and Plumbers.
  • 【EFFICIENT WORKING】: The cutting machine adopts ratchet drive technology to ensure automatic locking during the cutting process to protect the user from the rebound of the blade. The handle adopts the principle of leverage and is light in design, which greatly saves your strength.In the bottom of the tube cutter, there has a stainless buckle.When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space.
  • 【QUICK CHANGE BLADE SYSTEM】: Has a quick blade replacement system.You can easily and quickly replace the blade without any other tools,Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter.You can easily change blades in less than 10 seconds..
  • 【ERGONOMICS DESIGN】: The handle of the pipe cutter covered by soft rubber and is ergonomically designed which is non-slip,soft and comfortable,reducing fatigue on your hands and wrists. It can be operated for a long time and improve work efficiency..
  • 【SUPER QUALITY】: Pvc pipe cutters blade uses ....
Check Stock

HAUTMEC Multifunction Ratchet-type Tube and Pipe Cutter, One-hand Fast Pipe Cutting Tool for Cutting Up to 1-5/8 inch, 3-in-1 Tubes, Wire and Trunking cutter HT0257-TC

  • 【Advanced Ratchet Design】 Adopts double ratchet mechanism for smooth and faster cutting operation by one hand with no return of the blade during cutting, making cutting more labor-saving and efficient. Firmly securing the blade, the automatic locking mechanism protects users from the rebound of the blade during the cutting.
  • 【3-in-1 Tool Function】Serves as a plastic tube cutter, wire-cutter and trunking-cutter. Material cut: PVC, PP, PE, PER, PEX, ABS, PEHD, CPVC, PPR, PB, multilayer with an outer diameter below 42mm. Integrated wire-cutter: max Ø: 12 mm, max cross section: 4G2.5 mm². Integrated electric trunking cutter: maxi 25 x 12.5 mm (PC 42). It is an essential cutting tool for home handymen, plumbers, electricians, and vehicle mechanics.
  • 【20% Labor-saving Blade】Equipped with a V-shaped pipe blade with teflon coating, this pipe cutters boasts extremely smooth sliding, rust resistance and durability. On average, the cutting load is reduced by 20% versus with a blade with a typical coating. Heat-treated blades are not easy to rust or break and stay sharp in the harshest environments. Tool-free blade change is available. See ASIN: B0B5ZYBR1C.
  • 【Ergonomic Handle】The ergonomic soft-touch handle features soft coating, which is non-slip, w....
Check Stock

YWBL-WH Zinc Alloy Tube Cutter,Glass Tube Cutter Pipe Cutter Hand Tools for Cutting Small Glass Tube

  • Application:Glass cutter device, adapted to cut small glass tube, easy to operate.Handheld and portable, cutting glass tube is very easy and effortless..
  • Size: 6.5×7.2cm/2.6×2.8inch (as pictures shown).
  • Max cutting thickness of glass tube: 3mm/0.12inch.
  • Max cutting diameter of glass tube: 40mm/1.57inch..
  • Easy to Use and Fast:Just score and snap. Simply insert tubing into the cutter and rotate tube to score a precise mark, then snap tube along score mark..
  • Glass tube diameter can be cut to 1.57" (40mm)..
  • Material: Glass tube cutter is made of high quality zinc alloy, durable to use..
Check Stock

Garosa PVC Cutter Ratcheting Plastic Pipe Tubing Cutter PVC Pipe Cutter 2-1/2in 64mm Hose Cutting Scissors Heavy Duty Cutting Tool SK5 Steel Blade Aluminum Handle for PVC PP PU PE Pipe

  • USEFUL TOOL: Professional mechanics design, scientific design of aperture ratio, balance force, strong shear force, easy cutting, smooth and neat cut, improve work efficent..
  • RATCHET DESIGN: Self-locking ratchet design, tooth meshed and longitudinal feed, automatic locking does not rebound. Safe and secure. Our pvc pipe cutter maximum cutting diameter 64mm.
  • MATERIAL: SK5 material blade, high carbon content, high hardness, strong toughness, strong cutting, safe and not easy to break, not easy to rust, long life, high-quality blade steel.
  • PORTABLE: Ergonomic design, comfortable to hold and not tiring hands after working for a long time. The tail handle lock design, the lock locks the handle for easy carrying with work..
  • SUIT FOR: The pipe cutter is suitable for cutting PVC pipe, PP pipe, PU pipe, PE pipe. Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

ENLEE Mountain Bike Frame Guard, Bicycle Clothing Film, Sticker Tape, Personalized DIY MTB Protector-Decorate and Protect Your Bike (Transparent)

  • Frame Protector: It can be pasted repeatedly without leaving glue residue on your bicycle, effectively protecting the surface of the frame from scratches, waterproof and sandproof..
  • TPU Material：The thickness of this protective stickers is 200 μm, it can increase the friction, make it stick more permeability and toughness..
  • Good Effect Sticking it on Bike Frame: Through accurate computer calculation, automatic and precise cutting, the integration of visual effects is realized..
  • Function: The mtb bicycle cover film can protect your bike from little rock splash, aslo can decorate your bike. If any scraches, it's easy to cover, to make the bicycle new, cool..
  • How to Use：You can use this frame guard to protect your bike down tube or top tube frame , chainstay, bicycle fork. Or you can DIY according to your favorite..
Check Stock

Honeywell - HE250A1005 - Furnace Humidifier, Bypass, 17 GPD

  • BUY WITH CONFIDENCE: This genuine Aprilaire Humidifier Installation Kit was designed and manufactured in the U.S.A. by Aprilaire – the inventor of the Whole Home Evaporative Humidifier, and the leader in indoor air quality solutions, to optimize installation of Aprilaire Whole Home Humidifiers with Automatic Control..
  • COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an Aprilaire Whole Home Humidifier with Automatic Control, models 400, 500, 600. Reference installation instructions and template included with every Aprilaire Humidifier before installing..
  • HUMIDIFIER MOUNTING & BYPASS DUCTING COMPONENTS: (4) Mounting Screws attach Humidifier to furnace air supply or return duct, 6” Duct Collar connects Bypass Flex Duct to furnace air supply or return duct, and 6” Bypass Flex Duct (3 ft.) connects Humidifier to 6” Duct Collar.
  • HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (15 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens the Drain Tube to drain connection.
  • HUMIDIFIER ELECTRICAL COMPONETS: 18/2 Thermostat Wire (25 ft.) connects Automatic Humidifier ....
Check Stock

Foam Cutter Pen 24W 20cm 110-250V Electric Hot Wire Cutter with Start Switch Styrofoam Polystyrene Engraving Pin(US Plug)

  • The cutter heats up quickly, very convenient to use.It cuts the foam smooth and fast, seals the edges clean, and leaves no debris..
  • It features over-voltage protection, over-current protection and overheating protection. Automatic power-cut after overload, increased service life..
  • Perfect for polystyrene foam cutting, carving and write words on the foam. Ergonomic design handle with start switch that make it easier to operate, comfortable to hold..
  • The heating tube of the cutting pen can only be bent once and cannot be repeatedly bent at one point. Repeating the bend at one point may cause a break..
  • We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

JJC Nikon Z Mount Auto Focus Automatic Extension Tubes Macro Photography Tube for Nikon Mirrorless Camera Z50 Z5 Z6 Z7 Z6II Z7II Closeup Portrait Brass Mount Gilt Metal Contact 11mm +16mm Tubes

  • JJC AET-NKZII Automatic Extension Tube has Metal Bayonet Mount, Gilt Metal Contacts.
  • 2 extension tubes (16mm & 11mm) Can be used Individually or in Combination (27mm).
  • Retains Auto Focus and Exposure Capability, will not degrade the quality of your lenses.
  • Made of ABS+ Brass. Weight, 147 Grams, Package Includes: 11mm Automatic Extension Tube x 1, 16mm Automatic Extension Tube x 1, Body Cap x 1, Rear Lens....
  • Nikon Z Mount Macro Photography Tube, Closeup portrait tube, fits Mirrorless Cameras Z50 Z5 Z6 Z7 Z6II Z7II.
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool, Cuts up to 1-5/8\ PEX, PVC, PPR and Plastic Hoses, Pipe Cutters with Sharp 5Cr15MoV Stainless Steel Blades, Suitable for Home Repairs and Plumbers

  • ...g more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • 【Efficient and Safe】The ratchet drive design ensures the automatic locking function during the cutting process, protecting the user from the injury caused by the rebound of the blade. There is a plastic buckle on the bottom of the tube cutter for easy storage. When not in use, the handles on both sides can be retracted and the safety lock can be locked to save space and prevent accidental injury.
  • 【After-sale Service】Cutting PVC or CPVC it does a great job. If you need the cuts to be perfectly straight, you will need to support the pipe from both sides. These cutters perform very well at making easy, fast cuts. If perfection is desired though, consider some ratcheting PVC cutters. If you have any problems or dissatisfaction with our products, please feel free to contact us. The WORKPRO after-sales team will contact you in time to solve your problem.
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool, Cuts up to 2-1/2\ PEX, PVC, PPR and Plastic Hoses, Pipe Cutters with Sharp 5Cr15MoV Stainless Steel Blades, Suitable for Home Repairs and Plumbers

  • ...g more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • 【Efficient and Safe】The ratchet drive design ensures the automatic locking function during the cutting process, protecting the user from the injury caused by the rebound of the blade. There is a plastic buckle on the bottom of the tube cutter for easy storage. When not in use, the handles on both sides can be retracted and the safety lock can be locked to save space and prevent accidental injury.
  • 【After-sale Service】Cutting PVC or CPVC it does a great job. If you need the cuts to be perfectly straight, you will need to support the pipe from both sides. These cutters perform very well at making easy, fast cuts. If perfection is desired though, consider some ratcheting PVC cutters. If you have any problems or dissatisfaction with our products, please feel free to contact us. The WORKPRO after-sales team will contact you in time to solve your problem.
Check Stock

Jaws of Life: Stories

  • Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
  • Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
  • The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
  • Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
  • Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
Check Stock