Categories

Best Automation And Control Cylinder Hydraulic

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

Bonvoisin 20T Hydraulic Cylinder Jack Porta Power Ram 2\ Stroke Mini Single Acting Lifting Cylinders for Machinery Shipbuilding

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

NEWTRY 20T Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump Multi Section Jack, 1.18” Stroke Industrial Mini Hydraulic Cylinder

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has m....
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

  • SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
  • HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
  • EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
  • VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
  • LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..
Check Stock

Mophorn 12V/DC Hydraulic Pump 15 Quart/ 3.9 Gallon Double Acting Metal Reservoir Hydraulic Pump Unit Remotely Controlled for Dump Trailer

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Bottle Jack Ram 10 Ton Capacity Porta Power Hydraulic Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive Truck Farm and Heavy Equipment/Construction Skroutz

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2 inches high, but the stroke is up to 1 inch. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are ....
Check Stock

Bonvoisin 20T Hydraulic Cylinder Jack Porta Power Ram 2' Stroke Mini Single Acting Lifting Cylinders with Hydraulic Hand Pump for Machinery Shipbuilding

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

Mophorn 20T 4Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 100mm Hydraulic Lifting Cylinders (20T 4Inch Hollow)

  • Heavy Duty Jack: Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Paint spraying at the surface, prevent scratching and corrosion..
  • Large Lifting Capacity: Our ram hydraulic cylinder is designed to provide reliable support during operation. No stuck when lifting, large 20 T/44000 LBS tonnage, enough stroke(100 mm/4 inch)..
  • Convenient Use: Quick connecting head with dust cover, preventing the jack's inside from dust, features firm connection with no leakage. A portable handle increases flexibility and convenience..
  • Smooth Surface: The hydraulic ram cylinder features a smooth surface with circle texture, provide reliable support during working..
  • Wide Usage: This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock

Anbull 10 Ton Porta Power Hydraulic Jack, Upgraded Hydraulic Combined Multifunctional Jack for car Repairs,Auto Body Frame Repair Kit

  • 【Stability and Convenience】 The pump body of this hydraulic jack uses upgraded SEA#1045 steel. The oil passage will not have iron slag, and the new design of the oil passage is more stable. The pressure bar of the hydraulic portable ram kit adopts an integrated type pressure bar, which is beautiful and easy to use.The steel core of the cylinder is chrome-plated, which is more precise and wear-resistant and has a long service life..
  • 【Long Service Life】The hydraulic cylinder steel core of this 10 ton porta power kit is chrome-plated, precise, wear-resistant and has a long service life..
  • 【Stainless Steel Material】The pump of this porta power kit is made of stainless steel, with an industrial luster,which is stronger and harder to break,Compared with other hydraulic jack tool kit,our hydraulic power units give you even more long-term durability..
  • 【Multi-function Auto Body Frame Repair Kit 】Used for car, truck, farm and heavy equipment maintenance. Very suitable for various auto-body repairs, frame repairs and construction jobs..
  • 【Package Include】1x hydraulic hand pump, 1x round seat, 1x rubber ball, 1x V-shaped head, 1x wedge head, 1x connector, 1x flat base, 1x pressure nozzle, 1x ring claw, 1x extension foot, 1x hydraulic cylinder, 4x c....
Check Stock

Mophorn Hydraulic Steering Cylinder HC4645H Front Mount Hydraulic Outboard Marine Steering Cylinder Suit for Up to 150HP Boats Steering

  • HC4645H Front Mount Cylinder: HC4645H steering cylinder is ideal for outboard powered boats like center console, offshore fishing, bass boats, flats boats and many more. For use with Yamaha applications where it is necessary to mount the steering cylinder underneath the steering arm..
  • Advanced Crush Resistance: Our hydraulic outboard steering cylinder provides excellent resistance to repeated compression set and is designed to better withstand the harsh marine environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • ORB Fitting: The Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing. And we put two extra tubes for easy installation and replacement..
  • Sturdy Aluminum Alloy: The hydraulic steering cylinder is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Enjoy the steering helm for years to come..
Check Stock

Titan Attachments Hydraulic Backhoe Thumb 24' 70 lb. Weld On Steel Plasma Cut

  • Includes thumb, hydraulic cylinder, hydraulic hoses, mounting plate, pins, and bushings..
  • Hydraulicpowered retraction gives full control over load size and adds crushing strength to grip..
  • Heavy duty steel plasma cut for tight tolerances..
  • 1/2" Flat face couplers and hoses included..
  • Thick powder coat to resist rust. | Easy to assemble and weld into place..
Check Stock