Categories

Best Automobile Electronic Tools

uxcell DIP Quartz Crystal Oscillators Resonators 4MHz HC-49S Replacements 20 Pcs

  • The products are produced using the latest materials and technology, and each piece has been manually tested..
  • It can be used for automobile, home appliance, computer, communication, electronic development, experimental maintenance, personal DIY and other electronic products..
  • Stable frequency, light weight, small size, easy welding, etc..
  • It can replace coils and capacitors under certain circumstances..
  • Suitable for novices to learn and DIY. Suitable for developing new products..
Check Stock

ANGKEEL Electrical Cloth Tape 0.4 inch x 66 FT Non Conductive Heat Proof Insulation Acetate Fabric Stage Adhesive Tape for Automotive Wires Loom Harness, Cable Repair and Wrapping, Guitar Pickup Wrap

  • ✅[Adequate Size]: Acetate cloth tape full roll size length 20m x width 10mm (66 feet x 0.4 inch).
  • ✅[ Flexible and Durable]: Heavy duty fabric tape is strong bond at low and high temperatures from -14℉ to 250℉, suitable for indoor and outdoor..
  • ✅[ Insulation Protection]: Non conductive adhesive tape is used for various electronic parts, such as transformers, motors, coils, capacitors, voltage regulators, etc..
  • ✅[Easy to Use]: Gaffers tape readily sticks to any type of surface, can be torn by hand, easy field installation, without special tools or application methods..
  • ✅[ Multi-purpose ]: Professional grade duct tape used for automobile wiring harness wrapping, repair and binding books, fixed and winding all kinds of wires, replacing guitar pickup wrap, repairing and wrapped broken cables, electrical insulation, stage marking, temporary mounting, dance floor splicing, bundling of cables..
Check Stock

TIKSCIENCE LS Gen 3 ECM Engine Programming Control Module Reader Diagnostic PCM Bench Harness w/Power Supply Fits for GM Chevy All Blue/Red & Blue/Green 1999-2007 OBD2 Port 18 Gauge 12 Volt

  • Gen 3 LS ECM Programming Bench Harness Application - This bench-top harness that plugs into a standard wall outlet and allows you to connect a Gen 3....
  • LS LS1 Gen III Bench Harness Fitment - This works with HP Tuners, OBDII scan tools, and other programming methods that use the OBDII port for....
  • Gen III Programming Harness Tool Function - The electronic control unit of the automobile electrical system collects part of the working status....
  • Premium Quality LS1 OBDII Bench Harness - This LS LS1 OBDII Bench Harness features a redesigned housing to insure it lasts longer than the factory....
  • What Will You Get: One set OBDII Gen 3 Programming Bench Harness with Power Supply fits for GM Chevy LS LS1 5.3 5.7 6.0. We offer 1 year service with....
Check Stock

270pcs Heat Shrink Connectors Crimping Tool, Waterproof Automotive Marine Electrical Terminals Kit, Ring Hook Fork Spade Butt Connectors Splices, Connectors Kit Assortment for Automotive and Marine

  • 【MULTIPURPOSE USE】The terminal connectors are highly sealed , corrosion-resistant, provide reliable performance, and can withstand harsh environments. Suitable for all kinds of equipment switches, batteries, cars and household, electronic components with pins etc. Perfect for marine and automobile applications..
  • 【WORRY-FREE SERVICE】 We are so confident in our product that we offer a 1-year warranty for every customer. Enjoy your shopping and feel free to contact us!.
Check Stock

Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI

  • 【Professional Cleaner Tool】 Improper cleaning of automobile fuel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
  • 【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
  • 【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
  • 【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connector....
Check Stock

Trabulate Car Vinyl Wrap Window Tint Film Tool kit Including Felt wrap Squeegee, Micro Squeegee,Safety Cutter,Plastic Scraper, Retractable Kinfe and Blades for Car Vinyl Wrapping

  • This is a very professional set of car vinyl wrap tool kit and window tint film kit.In the automobile vinyl coating installation and automobile window tinting film installation work very well.
  • This Car wrap kit include felt squeegee, spare felts, vinyl squeegee, grey angled stick squeegee, magnetic micro squeegee, Double blade scraper + 5pcs plastic blades+5pcs metal blades, safety cutter, wrap knife + 5pcs blades, vinyl wrap cutter + 10pcs blades.
  • The vinyl wrap kit includes rreusable felt adhesive for effective removal of excess air bubbles during car packaging or window tinting installation,, newest designed EVA Composite, Squeegee felt made with elastic polymer which is extremely resilient and very durable,which improve installation speed and protect the vinyl at the same time,Leaves little to no adhesive when removed.
  • Green wrap stick squeegee with strong magnet, can stand to the car body，Round tip can reach gaps areas ，with cut parallel slots on one end to provide distance cuts for vehicle edges and window frames.
  • Wrap kit comes with vinyl edge trimmer, variety vinyl cutting tools.This Car Vinyl wrap Tools Kitused as window tint squeegee, car vinyl wrap, car wrap kit, vehicle window film, wallpaper install, bathroom tool, glass door..
Check Stock

50pcs 10 Value 32.768KHz-24MHz DIY Quartz Crystal Resonators Oscillator Assorted Kit

  • HIGH QUALITY: Made of high quality quartz crystal material, very durable and stable to use..
  • FUNCTION: It provides a stable signal for integrated circuits and it stabilizes the frequencies of radio transmitters and receivers..
  • EASY TO USE: This set is organized by size in a transparent storage case for quick access and protection..
  • MEET YOUR DIFFERENT NEEDS: There are 11 Value 32.768KHz-24MHz Oscillators to meet your various needs..
  • APPLICAITON: Widely used in TV, automobile electronics, pc cards, electronic meter, DVD, MP3, MP4, etc..
Check Stock

Chemical Guys BUF502X - TORQ TORQ22D Random Orbital Polisher Kit (9 Items)

  • Polishes and removes swirls, scratches, and defects from all painted vehicles.
  • Developed for enthusiasts and professionals using heavy-duty construction, applies wax, sealant, and glaze in minutes.
  • Easy-to-use features for any detailing enthusiast or professional, designed with streamlined controls for maximum comfort on any automobile surface.
  • Powerful 680 Watt electric motor, versatile 8 millimeter dual action orbit for perfect polishing in any area. Electronic User Interface (EUI):Digital display and speed control buttons for precise and intuitive control.
  • Lightweight construction with vibration reduction technology.
  • Symphonic Construction:Lightweight construction with vibration reduction technology.
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

  • The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
  • Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
  • The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
  • They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check Stock

Beyondlife 1080W Plastic Heat Welding Hot Air Torch Welding with Nozzle Hose Kit for Welding Machine Adjustable Temperature

  • The plastic welder is very easy to use for repairing plastic. Handy and flexible split design..
  • 9 levels variable heat temperature settings adjustable from 50-550℃ for different kinds of plastic..
  • This plastics welder will turn plastics into a molten puddle very quickly, allowing you to complete repairs quickly and efficiently..
  • High-quality motor and heating elements that can supply natural and gentle wind. Strong heat dissipation..
  • Ergonomic design requires less effort. A must have for welding electronic components and automobile bumper, etc,..
Check Stock

McCulloch A275-004 Brass Brush (5 Pack)

  • Designed for scrubbing especially tough stains.
  • Perfect of use on BBQ grills, oven racks, automobile engines, shop tools and other hard metal surfaces.
  • Package dimensions : 5.8 inches (H) x 6.3 inches (L) x 2.7 inches (W).
Check Stock

DC 12V/24V Universal Motor Speed Controller Switch for Car Truck Fan Heater Control

  • This electronic stepless speed controller is a upgraded fan heater controller with heat sink that will ensures a better heat dissipation..
  • Easy to adjust and control speed of DC motor, simple wiring and convenient to use, a great replacement for broken one..
  • Widely used for adjust motor speed, automobile fan heater control, defroster, fans speed regulation, etc..
  • Red wire connected to the positive pole of power supply and motor, blue wire connected to the negative pole of motor, black wire connected to the....
  • Way of connection: The red wire is connected to the positive pole of the power supply and the positive pole of the motor.
Check Stock

Tachometer Gauge,Geevorks 3.75 12V Automotive Replacement Tachometers 0-8000 RPM,RPM Tachometer for Car 4/6/8 Cylinder Engines

  • 【Measurement】Used to measure the RPM of automobile engine. Measurement range is 0~8000RPM. 【NOT suitable for diesel vehicles, Only for 12V....
  • 【Strong Compatibility】Compatible with 4/6/8 cylinder engines with points, electronic, and most 12V high-performance racing ignitions..
  • 【Backlight】Bring you a more cool engine tachometer, after starting, the dashboard lights up, and the gasoline car adds interesting auto....
  • 【Smart Car Meter】Adjustable shift light on face.After power-on, the product will check and adjust the pointer by itself..
  • 【Package Included】1 x Tachometer Gauge.
Check Stock