Categories

Best Automobile Press Die

Forster Products Bench Rest Die Set 338 Lapua Magnum

  • Includes a Full Length Sizing Die and standard Bench Rest Seater Die in a Deluxe Die Box.
  • We recommend a Full Length Sizing Die/Bench Rest Seater Die set for each rifle caliber you own.
  • If using Forster Dies in a Forster Co-Ax press, shellholders are not required.
  • If using Forster Dies in any non-Forster press, use manufacturer-recommended shellholders.
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

Hornady Lock-N-Load Die Bushings, 10 Pack – Change Dies Quickly with a Simple Twist – Compatible with All Reloading Presses - Item No. 044096

  • Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
  • Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
  • Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
  • The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
  • How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.
Check Stock

Zfyoung 8" Professional Pruning Shears, Bypass Pruners, Pruning Scissors, Garden Shears, Garden Scissors, Gardening Shears, Garden Clippers, Garden Shears Pruning, Garden Supplies, Garden Tools

  • Hornady Lock-N-Load Classic Reloading Press – A single stage metallic press that's perfect for both beginners and those who want complete control over the entire process. A must-have for the reloading enthusiast.
  • Strong Angled Frame – The Lock-N-Load Classic has a high strength, uniquely angled alloy machine frame delivers both dependability and precision. Also offers greater visibility and easier access to the cartridge.
  • Quick and Easy – Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy. Switch from one die to another in a matter of seconds. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.
  • Easy Grip Handle – The large, ball-style handle reduces fatigue. The long handle increases leverage and reduce effort. The Power-Pac linkage and solid steel arm multiplies the leverage you apply to the handle, making is easier to size cases and reduces fatigue.
  • How to Use – Simply set the die and tighten the Sure-Loc ring on the Lock-N-Load bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads. Dies, bushings, and sh....
Check Stock

TG,LLC Treasure Gurus 1:48 Scale Metal Printing Press Die Cast Diorama Accessory Desk Pencil Sharpener

  • Add some great historic to your desk, den, or at work with this Collectible Die Cast Miniature Printing Press Replica.
  • Miniature Printing Press Pencil Sharpener measures 2 3/8" long, 1 5/8" wide, and 2" tall, with a sliding Print surface, which flips up to reveal the ink pad.
  • The Printing Press Replica is perfect for those who love antiques, writing, journalism, or want to add this accessory to their 1:48 Scale Diorama.
  • Metal Die Cast Miniature Printing Press 1:48 Scale Diorama Accessory ships brand new with our 100% customer satisfaction guarantee.
  • Perfect, fully functional showpiece with movable parts that also features a hidden pencil sharpener in the back, makes a great piece to add to a pencil sharpener collection.
Check Stock

Breville Citrus Press Pro Electric Juicer, Stainless Steel, 800CPXL

  • The Breville Citrus Press Pro offers more variety, more juice with less fuss.
  • Its active-arm press with power assisted lever makes pressing fruits effortless and the Quadra-Fin acid-resistant cone maximizes the extraction of all citrus fruits with ease.
  • QUADRA-FIN JUICING CONE: The juicing cone design is uniquely finned and undulated to extract the maximum juice from all sizes of citrus fruit and it’s dishwasher safe.
  • DUAL SWITCH SAFETY: The juicers triple hinged arm ensures downward pressure throughout the juicing process.
  • The safety switch won't allow the cone to spin until both the arm is lowered and sufficient pressure is placed on the top of the cone.
  • ACID RESISTANT DIE CAST CONE: The Breville Citrus Press Pro lets you enjoy a lifetime of juicing with the die-cast stainless steel juicing cone and durable die-cast body that are resistant to corrosive citric acid.
  • DRIP STOP JUICE SPOUT: The citrus juicer features a convenient and innovative drip stop system which holds juice back to avoid spillage onto your countertop.
  • FRUIT DOME: The juicers fruit dome is easy to remove and replace for cleaning.
  • DISHWASHER SAFE: Spend less time cleaning up the juicing cone, juice collector, juice filter and fruit dome.
  • WARRANTY: 1 Year Limited Product Warranty.
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • ... wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth opener kit is the nice assistant for craftsmen no matter if you are a novice or a skilled worker, which is very suitable for cleaning low-carbon steel or aluminum products in construction, automobile maintenance and factories, largely improving work efficiency and having strong practicability.
Check Stock

SWAG Off Road 50\ Press Brake DIY Builder Kit With Adjustable Back Stop.

  • Press Brake Kit comes Unassembled, you do the final assembly and welding..
  • Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die..
  • This universal press brake kit will bend steel up to 49" wide..
  • Designed to fit in hydraulic presses that are at least 52" wide, but can easily be cut down..
Check Stock

Watch Press Tool, TOPWAY Watch Back Press is Suitable for Watches(18-50mm). Watch Case Press (with 12 dies) for Closing Watch Back Cover and Watch Opener Knives for Watch Battery Replacement Tool Kit

  • 【Complete tools】TOPWAY metal watch repair tool includes a watch press manchine, 12 different size of dies, two watch pry opener and a cleaning cloth. This watch tool kit is suitable for snap off watches to open the watch，closing the watch back cover after repairing such as battery replacement and cleaning. It can be easily used at home, whether it is a professional or a beginner.It can also be used as a valentines day gifts for your lover..
  • 【12 Dies for Your Watch】This watch case press is equipped with 12 dies, which are suitable for snap-off watches of 18-55mm sizes. There are 10 double-sided dies, such as 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm. Different types meet your various watch back press needs. There are also 2 special dies for crystal watches. The dies are marked with dimensions, helping you quickly find the right die and improve work efficiency..
  • 【Easy operation】This watch press set back case closer only takes 3 steps to close the watch back cover - Firstly, select 2 suitable dies and screw them on the watch press machine. Secondly, put the cleaning cloth on the lower die and the watch o....
Check Stock

Hasbro Games Toilet Trouble

  • Fun game for ages 5 and up: Just 2 players are needed to play the trouble board game.
  • 2-4 players: The trouble game is a fun activity for play dates, after school, and family time.
  • Enjoy playing the game with 2, 3, or 4 players.
  • Power up spaces: The game instructions include options for playing the classic trouble game or using power up spaces.
  • Pop-o-matic bubble: The iconic pop-o-matic die roller bubble is fun to press, and it keeps the die from getting lost.
  • Great family game: Adults and kids 5 and up can play the trouble game together. It's a great choice for family game night.
  • Send other players' pegs home when you land on the same space.
  • Double Trouble and Warp spaces change up the game.
Check Stock

Hornady Match Grade 2 Die Set, 6.5 Creedmoor (.264) (544655) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 6.5 Creedmoor Die Set 2-Die Set (.264) (544655) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range..
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - H....
Check Stock

Hand Press Grommet Machine, Heavy Duty Industrial Grommet Eyelet Tool Kit Table Mount Rivet Press Hole Punch Tool with 3 Dies and 900 Grommets

  • This 3 die hand press grommet machine is an essential equipment for dress makers, arts & crafts, sign shops and manufacturers, ideal for craft and industrial use.
  • Made of cast iron, built to last. This manual eyelet punch grommet machine is smart which is very easy to operate because of the simple structure, also convenient for shipping.
  • Specially designed for banners, signs, awnings, posters, curtains, digital printing, scrapbooking, corsets, belts, bags, shoes, etc, widely used as punch machine, eyelet machine, snap fastener machine, rivet machine.
  • The rivet press hole punch tool machine can be mounted to a tabletop or stand alone, which can fit anywhere as you want, just install with the die in suitable size.
  • Package includes 1 x Grommet Machine, 3 sets x Dies, 3 bags x Grommets (Total 900 pcs). The eyelet punch tool can exchange different die sets and 3 different dies can meet most needs.
Check Stock

Accuquilt GO! Big 55500 Electric Fabric Cutting System

  • OUR FASTEST GO! CUTTER – Cut two 6" wide dies side by side with up to six layers of fabric at the press of a button!.
  • ACCURATE - Save fabric, save money and say so long to the mistakes from your rotary cutter with the GO! Big.
  • SAFE & EASY TO USE - No more backaches, cut fingers and sore hands. Electric function maximizes efficiency and minimizes physical effort and discomfort. Place a die, fabric and mat on the cutter’s plat-form. Press the power button to create perfectly cut shapes in seconds..
  • FEATURES - One button functionality for ease of use and built-in safety features, Cuts up to 6 layers of 100% cotton fabric at a time, Cut a wide variety of fabrics: cotton, batiks, wool, flannel, fleece, denim, leather, batting, felt, silk and satin, 14" cutting width: Fits these die sizes: 5" x 10", 6" x 12", 6" x 6", 6" x 24", 10" x 10", 10" x 24", 14" x 16".
  • INCLUDES - GO! Big Electric Fabric Cutter, GO! Flying Geese Die-3½" x 6½" (3" x 6" Finished): Half Square Triangle-6"....
Check Stock