Categories

Best Automobile Valve Guides

Bach LT180S37 Stradivarius Bb Trumpet

  • Bright Silver Finish -- Gold Brass Leadpipe w/ Nickel Silver Mouthpiece Receiver.
  • .459" Bore -- 4 13/16" Seamless Yellow Brass Bell.
  • Monel Pistons w/ Single Point Valve Guides -- Nickel Silver Outside Slide Tubing.
  • 1ST Valve Slide Thumb Saddle -- Adjustable 3RD Valve Slide Ring -- Waterkeys on Main & 3RD Valve Slide.
  • Includes Bach 7C Mouthpiece -- Includes Durable ABS Molded Plastic Case.
Check Stock

Bach BTR301S (Silver) Student Trumpet

  • Key: Bb Bore: .459-inch Leadpipe: Standard Leadpipe Material: Yellow Brass Bell: 4-13/16-inch One-Piece Hand-Hammered with Flat Rim Bell Material: Yellow Brass Valves: Monel Pistons 1st Valve Slide Adjustment: Split Ring 3rd Valve Slide Adjustment: Fixed Ring Features: One-Piece Hand-Hammered Bell with Flat Rim.
  • Two Sets of Valve Guides (Brass and Plastic).
  • Deluxe Bell Engraving Case: C190DBL Delu.
Check Stock

Brian Tooley Racing BTR LS Valve Seal Kit with Install tool 4.8 5.3 5.7 6.0 6.2 7.0

  • Brian Tooley Racing LS Valve Seal Kit, 8 Black Intake and 8 Black Exhaust Seals.
  • LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
  • Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
Check Stock

COMP Cams 502-16 Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32\ Valve Stem

  • Work with stock guides and 11/32 inch valve stem diameter.
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber.
  • Several different types of valve seals are offered.
Check Stock

SINGARO 12PCS Tire Valve Stem Caps Car Exterior Accessories Aluminum Alloy Valve Cover General Purpose Cars Trucks Motorcycles and Bicycles Titanium Gray

  • High quality: Made of high-quality aluminum alloy, fine workmanship, oxidation resistance and wear resistance. There is a rubber seal inside, which....
  • Personalization: The appearance of valve cap is fashionable and personalized, which can well decorate automobile tires and improve the appearance....
  • Easy to install: Just screw the valve cover onto the valve stem along the thread, and the valve cover will not be damaged during installation. Most gm....
  • Product size: A set of 12 pieces, bonnet length 0.67 inches (17mm), diameter 0.36 inches (9mm)..
  • Service: If you have any questions about the product, please contact us in time, and we will provide you with satisfactory solutions..
Check Stock

CASTNOO Brian Tooley Racing for LS Valve Seal Installation Tool 4.8 5.3 5.7 6.0 6.2 Springs

  • Application--LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
  • Function--Separate Spring Locator is Required, Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
  • Easy to install--Easily Install Valve Seals when changing your springs.The last thing you want to do is install valve seals using a socket and hammer.
  • This seal installtion tool allows you to slowly press the seal down without damaging the seal..
  • 100% Satisfaction Guarantee--If you're not 100% satisfied with this LS Valve Seal Installation Tool, simply return it for a full refund in 30 days.
Check Stock

Bushwacker 38501 SmoothBack Ultimate BedRail Caps for 1995-2004 Toyota Tacoma | Fits 74.5 in. Bed

  • High quality: This product is made of 100% alloy material, never rust, never fade, directly replace the original black plastic valve cover, from the details to make your car different..
  • Safety: Protect stem cap from corrosion caused by direct contact with clay, water and snow. The rubber sealing O-ring is built in the valve cap of automobile tire, which has leak proof function and can not leak in long distance and hard driving. Prevent tire burst and ensure stable tire pressure. Ensure safe driving..
  • Installation: Hexagonal design, just screw off the plastic cap of the original car and screw on the metal one. The valve stem cover is suitable for cars, trucks, motorcycles, bicycles and other motor vehicles..
  • Expressing patriotism：The American flag designed tire valve cap is low-key, but still the perfect way to show your patriotism, support for government and love for freedom, the American flag represents..
  • After sales: Our products are high quality products, if you have any dissatisfaction. Please let us know in time, we will refund you unconditionally..
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

A-Premium Engine Valve Cover Kit, with Gasket, Compatible with Chevy Cruze 2010-2016, Sonic 2012-2018, Trax 2013-2020, Aveo 2009-2011, Aveo5 2009-2011, L4 1.6L 1.8L, Replace # 55558673 55564395

  • [For L4 1.8L Engine] Compatible with Chevrolet Chevy Cruze 2010-2016 ✔ Cruze Limited 2016 ✔ Sonic 2012-2018 ✔ Trax 2013-2020 ✔ Saturn Astra 2008-2009 ✔.
  • [For L4 1.6L Engine] Compatible with Chevrolet Aveo 2009-2011 ✔ Aveo5 2009-2011 ✔ Pontiac G3 2009-2010 ✔ Pontiac G3 Wave 2009 ✔.
  • [Package Details] 1 x Engine Valve Cover with PCV Valve, 1 x Valve Cover Gasket, 1 Set of Bolts (with 1-Year Warranty, and Replace for GM # 55558673, 55564395).
  • [Perfect Solution] This engine valve cover kit is best professional solution for Cruze/Sonic/Trax/Aveo's the engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from O-E-M part.
  • [Customer Support] With being easy to install and brand-new, this valve covers is the ideal engine cover which comes with 1-year warranty. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Performance Tool W80594 Vacuum and Fuel Pump Tester Tool

  • Detect weak valve springs, worn valve stem guides or leaking head gasket.
  • Quick, accurate testing for many applications.
Check Stock

Bach Trumpet (AB190S)

  • Professional Trumpet: .462” large bore and 4-13/16” one-piece hand-crafted hammered yellow brass bell.
  • Monel pistons designed specifically super-resistance to corrosion.
  • 3 sets of valve guides - brass/plastic, 1st slide split ring, 3rd slide pin stop, 3rd valve tone enhancing ring.
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

WOOSTAR 52.4mm Complete Cylinder Head 66mm Valves Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Go Kart Dirt Bike

  • Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity.
  • New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary..
  • Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression..
  • All necessary parts are cleaned and inspected before final assembly to meet AERA specifications.
Check Stock