Categories

Best Automotive Interface

Rothco Vintage Paratrooper Shorts, ACU, Large

  • ...V vehicles. You can access four precise diagnostic modes (DC Voltage, AC Voltage, Resistance and Diode), providing efficient electrical system testing, continuity testing, fault diagnosis, ground testing without fuses, component activation on and in the vehicle, and voltage detection. It is the perfect tool for all automotive electrical needs..
  • [Built-in Diagnostic Power] - With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead together to power up components in your hand. Easy to apply, it can power components such as radiator fans, starter motors, relays, window regulators, and windshield wipers. Quickly check components for continuity, identify positive, negative and open circuits, and locate shorts without wasting fuses..
  • [Best Repair Assistant for You] - Intuitive interface, the KM10 probe tester is an essential tool for automobile user to check system failure by themselves. The power circuit probe kit can also perform continuity and resistance checks, checking for the good and bad grounds, which are essential for tracking the automotive circuit and identifying any broken parts..
Check Stock

allsun Automotive Dwell Meter Digital Multimeter Autoranging TRMS 5999 Counts ACA/DCA Max.20A for RPM Dwell Angle Pulse Width Tach Temperature Duty Cycle Data Hold Test,Meter to PC

  • 【VERSATILE MULTI-FUNCTION DIGITAL MULTIMETER】Dwell Meter RPM Automotive accurately measures AC DC Amperage to 20A, AC DC Volt to 750V~1000V, AC DC Ohm to 60MΩ, Capacitance to 4000μF, Temp -4~1832℉, Frequency 9.999MHz, Duty Cycle 0.5%~99.9%, Dwell Angle 3/4/5/6/8 Cylinder Switchable, 0.5ms~20.0 ms pules width, 2-stroke engine(60~20000RPM),4-stroke engine(120~20000RPM) Tachometer etc.Test..
  • 【MEASURING THE ESSENTIAL INFORMATIONS】The Tachometer Meter performs standard automotive-specific tests for on-car and on-bench troubleshooting,such as RPM, dwell angle and pulse width cycle, relative measurement, data hold, back light, low battery indication, over range indication. It is an ideal measurement tool for automotive repair and service personnel..
  • 【FULL AUTO METER&HAND FREE】The tach and dwell meter defaults to autorange in measurement functions which have both autorange mode and manual range mode.When the meter is in autorange mode, "AUTO" is display. Auto back-light, and auto shutdown function make it easier to troubleshoot the automotive and electrical problems. Magnetic attachment on metal surface, Hanger, Kickstand to set your hands free..
  • 【METER-TO-PC COMMUNICATION】Dwell tach meter, you can use the supplied data cable and the communi....
Check Stock

Agastat TE Connectivity 7022AC Time Delay Relay 120VAC Off-Delay 1.5 - 15 Seconds

  • Double way USBCAN II Debugger with 2 Road CAN interface, PC can be connected to a standard CAN network through the USB bus, the construction of Field bus testing laboratory, industrial control, intelligent building, data processing, automotive electronic.Support VC++, C#, VB, Labview and other two development interface functions..
  • Double way USBCAN II The debugger equipment, CAN bus circuit adopts DCDC power module, industrial grade magnetic coupling isolation chip CAN bus isolation, the interface adapter has a strong anti-jamming capability, greatly improve the reliability.Systems support for WIN98, for WIN200, for XP, for WIN7, for WIN8, for WIN10..
  • Double way USBCANII The debugger can use the USBCAN tools provided by our shop, directly to the CAN bus configuration, send and receive. Users can also refer to the store to provide the DLL dynamic link library, routines to write their own applications. Intuitive, fast hardware filter settings.Added USB protection, CAN bus protection circuit..
  • Double way USBCAN II debugger can be used as a standard CAN bus, CAN bus is CAN bus equipment product development, testing, a powerful tool for data analysis.
  • at the same time, the USBCAN debugger has the characteristics of small volume, convenient insta.
Check Stock

Hantek HT1008C 8 CH Automotive Lab Scope, HT30A/HT201/HT25 Included

  • 78 types of automotive test functions, including ignition, sensors, Bus diagnosis, engine & charging curcuits.
  • 100kHz bandwidth, 2.4MSa/s, 8 channels, 12 bits resolution, 4K memory, 400V max input.
  • Data saved as txt/csv/rfc/xls/doc/jpg via USB 2.0 interface.
  • Comes with 1 HT25 secondary ignition probe.
  • Bonus kits inlude 1 HT201 attenuator and 1 HT30A.
Check Stock

LZLRUN K+CAN K+DCAN Car Diagnostic Tool Cable OBD USB Interface with Switch for BMW with FT232RL NCS Coding Winkfp Tool32 Programing

  • Our diagnostic cable is the GREEN PCB board, Our diagnostic cable with Switch, so now it can support more cars easier.
  • Interface USB OBD2 for BMW - Ediabas - K+DCAN allows full diagnostic for BMW from 1998 to 2019 (all functions as in OMNITEC interface). Build in 2 lines K and D-Can magisterial.
  • In FT232RL chip, quick connect and response.Note:Because this product is a technical automotive diagnostic products, if not familiar with the diagnostic technology, please buy carefully, thank you.
  • Works flawlessly with N54, N55, N55E, S55, B58, and N13 for MHD Flasher with Android device. You may need a USB C adapter.
  • Your fantastic OBD2 diagnostic DIY tool, to same your time and money, enjoy your DIY diagnose.
Check Stock

allsun 2 in 1 Handheld Digital Storage Oscilloscope Automotive Diagnostic Lab Scope Protable Digital Multimeter Color Screen Scope DMM Meter 2 Channels,25MHz

  • 【2 IN 1 COLOR SCREEN OSCILLOSCOPE】 Handheld Oscilloscope Function & Digital Multimeter Function, Digital Multimeter functions integrated multifunctional handheld instrument, ideal for field use..
  • 【DIGITAL OSCILLOSCOPE MAIN FUNCTION】 Oscilloscope Multimeter has 2-channel ,25MHz digital storage oscilloscope,6000 words True RMS, True 6000 words RMS digital multimeter, 100MSa / s real-time sampling rate, 25MHz real-time bandwidth..
  • 【HANDHELD OSCILLOSCOPE MATERIAL AND LANGAUGE SWITCH】Handheld Oscilloscope has ABS on the outside(such as BNC connector. With some metal for connection on the inside.Chinese got it back to English, step is Power on - menu - F4 - F2.
  • 【EQUIPED WITH OSCILLOSCOPE & DMM FUNCTION】Automotive Oscilloscope has equiped with oscilloscope function and DMM function. Oscilloscope--- automatically capture waveform, read out, waveform display processing, single & dual cursor measurements, scanning and recorder function..
  • 【STANDARD USB INTERFACE】Handheld Digital OscilloscopeThrough the PC software can easily communicate with a computer for data analysis and test results archive, through the USB interface and the computer connection, transmission, you can analyze and print data from the oscilloscope..
Check Stock

Hantek DSO2C10 Digital Storage Oscilloscope 100MHz Bandwidth 2CH Dual Channel 1GSa/s 8M Memory Depth

  • 78 types of automotive test functions, including ignition, sensors, Bus diagnosis, engine & charging curcuits.
  • 100kHz bandwidth, 2.4MSa/s, 8 channels, 12 bits resolution, 4K memory, 400V max input.
  • Data saved as txt/csv/rfc/xls/doc/jpg via USB 2.0 interface.
  • Comes with 1 HT25 secondary ignition probe.
  • Bonus kits inlude 1 HT201 attenuator and 1 HT30A.
Check Stock

UNI-T UPO3000E Series Digital Oscilloscopes 4 Channels,2.5GSa/s,Memory Depth:70Mpts,200,000wfms/s,8'' Display Wide Voltage (UPO3154E 150MHz)

  • Product 1: Upgraded UNI-T UT210E Pro with larger range, faster reading, and new features. Versatile for diagnose automotive, repair, troubleshoots, industrial and household electrical issues. All in one..
  • Product 1: Ultra safe and built to last. Safety rated CAT II 600V, CAT III 300V. Built in smart chip for overload protection. Pocket sized, nonslip rubber grip and easy to carry..
  • Product 2: UNI-T UTD2152CEX has150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Hantek 1008C+ 8CH Automotive Diagnostic PC Oscilloscope 2.4MSa/s USB 2.0 bandwidth 100K Program Generator

  • Free software upgrading constantly, higher cost performance.
  • Standard equipped over 80 types of automotive measurement function (Ignition Action/The Sensor/Bus..
  • USB 2.0 interface plug and play, and no need extra power supply..
  • Support tablet PC, Support WIN10/ WIN8/WIN7..
  • 4 isolated channels oscilloscope, 1GSa/s real time sampling rate, 2mV-10V/DIV high input sensitivity and large input range, 70MHz high bandwidth..
Check Stock

JVC Marine Radio Stereo Bluetooth Receiver Bundle with Adapter Install Dash Kit, Handle Bar Control, Enrock Wire Antenna For 1998-13 Harley Davidson Motorcycle Touring Flht Flhx Flhtc

  • PACKAGE BUNDLE INCLUDES: 1 JVC KD-T92MBS Bluetooth Marine USB AUX AM/FM Radio CD Receiver + 1 Enrock EHDRAB98-13 Single DIN Dash Kit For Cars And Motorcycle Bikes + 1 Metra Axxess ASWC-1 Handle Bar Control Interface + 1 Enrock Antenna.
  • STEREO RECEIVER UNIT: This JVC marine and motorsports receiver features CD playback and a classic AM/FM tuner so you can choose between listening to your own tunes and the radiowaves with ease. Bluetooth connectivity lets you conveniently connect your preferred handheld device to the receiver while the USB port allows for high current charging to keep your device powered all through your ride!.
  • DASH KIT TRIM: The Enrock EHDRAB98-13 will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash, It has a rubber trim gasket to fight moisture and vibration..
  • HANDLE BAR CONTROLLER: Adding the Metra handlebar control interface enables you to connect to an aftermarket stereo while containing the full functionality of your factory steering wheel controls..
Check Stock

Hantek DSO2D15 Digital Storage Oscilloscope 150MHz 1GSa/s 8M,2 Channel,2CH+1CH with Signal Source

  • PROFESSIONAL AUTOMOTIVE OSCILLOSCOPE| Designed for vehicle diagnostic to inspect over 80 items including ignition, sensors, engine, startup and charge. Simply select from the preset modes, run the tests and read from the high-resolution colour LCD display screen..
  • FOUR INSTRUMENTS IN ONE| Automotive multimeter tester, oscilloscope, DMM and waveform generator in one device. Dual channel with real-time sampling-rate 250MSa/s and optional bandwidth limit 20MHz. The recording function allows it to save and recall waveform easily for reference and comparation . PC connectivity available for further analysis and diagnosis..
  • HANDHELD COMPACT SIZE| The scope fits in palm and is convenient to operate with single hand, which makes it practical for quick checks and field work. The built-in rechargeable battery can work for as long as 24 hours continuously after 2 hours charging..
  • FRIENDLY USER INTERFACE| Versatile functions with easy-to-read display and intuitive controls. Switch to different modes and functions swiftly with simple buttons. Automatic adjustment with Auto Set Key, which can adjust the horizontal and vertical scales as well as trigger coupling, type, position, slope, level and mode automatically for a stable waveform display..
Check Stock

Newest Version V10.93 Carprog Full Cables Car Prog Programmer Car ECU PROG Programmer With All 21 Item Adapters

  • CARPROG V10.93 FULL Set with all 21 items Adapters was designed to meet the demands of our customers.
  • Have universal tool for repairing car radios, dashboards, immobilizers, including advanced functions like EEPROM and microcontroller programming..
  • CARPROG inside have powerful 16-bit MPU and full set of automotive interface drivers..
  • Work on Windows XP System Or Windows 7 32bits only, install the driver, use USB connect to PC, all adapters schematics diagrams on-line..
  • The best performance function is airbag reset, and it can not do by antenna..
Check Stock

Hantek Professional Automotive Oscilloscope 2D82AUTO, 4 in 1 Handheld Oscilloscope Multimeter, Digital USB Oscilloscope with 2 Channels 80 MHz Bandwidth, Oscilloscope Kit 2D82 I

  • this auto diagnostic oscilloscope is with 8Channels, 2.4MSa/s Real-Time Sampling Rate.
  • EASY TO USE -- Installs the PC software and start to use without any other drivers.
  • USB2.0 power supply + communication interface, plug and play, and support hot plugging..
  • Hantek 1008C provides Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​.
Check Stock