Categories

Best Automotive Lithium Greases

uxcell Silicone O-Ring, 33mm O.D, 27mm I.D, 3mm Width, Seal Rings Gasket, White, Pack of 20

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
Check Stock

SAE O-Ring BOSS Hydraulic 212 Piece O Ring Assortment Seal Kit Buna-N 90 for Hydraulic Fittings Hoses

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Sterling Seal ORBN022x50 Number-022 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1' ID, 1-1/8' OD (Pack of 50)

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

STAR BRITE White Lithium Grease 14 OZ Cartridge (026214)

  • Excellent water washout & high-temperature resistance 003e385°F making it superior to other greases.
  • Ideal for marine, automotive, industrial, garage, power & lawn equipment.
  • Adheres well for long-lasting rust and corrosion protection.
  • Because it contains no silicone it can be used on plastic components.
  • Star brite products are proudly made in the USA since 1973.
Check Stock

AGS Multi Purpose Oil Based Lithium Grease for General Application, Auto, Home, & Farm - 3 oz Cartridge, 3 Pack

  • STA-LUBE: Sta-Lube offers a range of high performance greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Highly efficient products have been rigorously tested to meet the highest quality standards..
  • LITHIUM GREASE: A high purity NLGI Grade 2 multi-purpose white lithium grease that delivers exceptional lubrication and durability in most conditions and at temperatures ranging from 0-300 degrees F..
  • APPLICATIONS: Assembly and break-in lubrication for bearings, cables, chains, chassis points, conveyor bearings, door tracks, garage door channels and openers, hinges, latches, machinery, open gears, overhead door tracks, roller bearings, and sleeve bearings..
  • APPEARANCE: Bright white in color for easy identification..
  • PRODUCT SPECIFICATIONS: The grease comes in a 14 wt oz can..
Check Stock

Sta-Lube Super White Multi-Purpose Lithium Grease SL3151-14 Wt Oz. Can, Durable, Multi-Purpose Grease

  • Excellent water washout & high-temperature resistance 003e385°F making it superior to other greases.
  • Ideal for marine, automotive, industrial, garage, power & lawn equipment.
  • Adheres well for long-lasting rust and corrosion protection.
  • Because it contains no silicone it can be used on plastic components.
  • Star brite products are proudly made in the USA since 1973.
Check Stock

Krytox by Chemours Krytox GPL206 Grease 0.5 kg/1.1 lb Jar D10170735

  • A high performance grease utilizing PFPE oil and thickened with PTFE powder.
  • Commonly used in the automotive and industrial market, applications for these greases include, but are not limited to, bearings, valves, gears, seals,....
  • GPL 206 has a base oil viscosity of 243 cSt @ 40 deg C and is suitable to use in applications up to 500 degrees F.
  • Chemically inert: resistant to oxygen and inert to most all chemicals.
  • inert nature allows krytox grease to outlast/outperform hydrocarbon products.
  • Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....
Check Stock

General Purpose Lithium Grease Tube | Grease Cartridge for Grease Gun | Tractor | Automotive | Ball Joint | Mower | High Temp | Door Tracks | Amber | Case of Grease 10 Tubes | NLGI 2 | GenPurpose

  • For all U.S., European & Japanese Vehicles.
  • Provides superior high- and low-temperature protection (-60°F to 425°F) over conventional greases.
  • Moly-fortified for increased film strength and exceptional resistance to heavy loads.
Check Stock

Mission Automotive 4 Oz Brush-On Oil-Based Battery Corrosion Preventative - Made in USA - Prevents Rust & Corrosion, Increases Life of Battery, Does Not Dry or Evaporate

  • For all U.S., European & Japanese Vehicles.
  • Provides superior high- and low-temperature protection (-60°F to 425°F) over conventional greases.
  • Moly-fortified for increased film strength and exceptional resistance to heavy loads.
Check Stock

Wolf's Head Red Grease NLGI #2 (836-88301-91) 14 Oz Tube, Pack of 10

  • premium, multipurpose automotive/truck chassis and bearing lithium complex grease.
  • Applicable in a variety of automotive and industrial uses requiring extreme pressure protection, oxidation, inhibition, water resistance, and anti-rust properties, including.
  • disc brakes, wheel bearings, chassis, ball-joints, 5 wheels and others..
  • Wolfs Head Red Grease is recommended for use in high-temperature, humidity, and water contamination applications such as mining, marine, and construction. This grease is also suitable for high speed bearings..
Check Stock

Sta-Lube Sta-Plex Extreme Pressure Premium Red Grease SL3190 – 14 Oz Multi-Purpose Lithium Complex Grease

  • STA-LUBE: Sta-Lube offers a range of high performance greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas.....
  • STA-PLEX MULTI-PURPOSE GREASE: A multi-purpose, red lithium complex grease that withstands extreme pressures and temperature ranges. NLGI GC-LB....
  • PREMIUM FORMULA: This premium grease is formulated anti-oxidation, anti-rust, and anti-wear additives, making it a highly versatile grease for use in....
  • APPLICATIONS: Industrial mining, metal production, machining, plastic molding, pumps, electric motors, ball and roller bearings, kilns, assembly....
  • PRODUCT SPECIFICATIONS: Sta-Plex is available in a 14 wt oz cartridge..
Check Stock

SainSmart TPU 1.75mm 92A Flexible TPU 3D Printer Filament, Dimensional Accuracy +/- 0.04 mm, 1KG, Pastel Skin

  • Recommended extruder temperature:195 - 230°C.
  • Recommended platform temperature: 40 - 60°C.
  • Compared to 95A filament, this 92A TPU Filament exhibits the following properties: higher elongation and abrasion resistance, better elasticity with highly reversible deformation and rebound resilience..
  • Low warping and stringing, resistance to oils, greases. Printing 92A Filament requires more tweaking than the 95A ones, but with the profile provided by us (find the product description below), printing with it would be much easier..
  • Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers..
  • 92A TPU Filament can be used to produce elastomer parts like protective covers and vibration dampeners, widely used in the sectors of electronics, automotive, consumer goods, and sports equipment..
Check Stock

SainSmart TPU 1.75mm 92A Flexible TPU 3D Printer Filament, Dimensional Accuracy +/- 0.04 mm, 1KG Spool, Pastel Skin

  • Recommended extruder temperature:195 - 230°C.
  • Recommended platform temperature: 40 - 60°C.
  • Compared to 95A filament, this 92A TPU Filament exhibits the following properties: higher elongation and abrasion resistance, better elasticity with highly reversible deformation and rebound resilience..
  • Low warping and stringing, resistance to oils, greases. Printing 92A Filament requires more tweaking than the 95A ones, but with the profile provided by us (find the product description below), printing with it would be much easier..
  • Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers..
  • 92A TPU Filament can be used to produce elastomer parts like protective covers and vibration dampeners, widely used in the sectors of electronics, automotive, consumer goods, and sports equipment..
Check Stock